1 / 1

Metallic Grey Blue Matte Car Wrap | Polymeric Vinyl
$200.00 USD
Size: 1.52*6m(5*20ft)
Color: Grey Blue

🎉 Free Shipping! Ready to ship

Metallic Grey Blue Matte Car Wrap | Polymeric Vinyl
$200.00 USD
1.52*6m(5*20ft) / Grey Blue
View details

Metallic Grey Blue lands in that cool, moody zone between slate and steel, with a fine metallic flake that wakes up under sunlight and goes quiet in the shade. The matte finish is flat and non-reflective, so the car reads serious and stealthy instead of shiny, and the blue undertone keeps it from looking plain grey.

It wraps over your factory paint and holds tight to curves, mirrors and bumpers, so the body underneath stays sealed off from sun, light scuffs and the grime of daily driving. When you want the original color back, the film comes off and your paint is still there.

Car half wrapped in Metallic Grey Blue matte vinyl next to a respray, showing the wrap is cheaper and reversible

Key features

  • Flat matte finish: a non-reflective topcoat gives the factory-flat, no-shine look that paint cannot match without a costly custom job.
  • Hides minor flaws: the matte surface softens light, so it disguises small swirls and imperfections instead of spotlighting them like gloss does.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the topcoat holds up to sun and rain across a -30 to +140 degree range.

How a wrapteck matte wrap is built

Layer diagram of Metallic Grey Blue matte vinyl wrap showing the PVC face, acrylic air-release adhesive and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Matte (flat, non-reflective)
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Metallic Grey Blue Matte Car Wrap | Polymeric Vinyl
  • Metallic Grey Blue Matte Car Wrap | Polymeric Vinyl
  • Metallic Grey Blue Matte Car Wrap | Polymeric Vinyl
  • Metallic Grey Blue Matte Car Wrap | Polymeric Vinyl
  • Metallic Grey Blue Matte Car Wrap | Polymeric Vinyl
1 / 1

Frequently asked questions

How long does a Metallic Grey Blue matte wrap last?

With good care it holds its flat metallic look for years. The matte surface and grey blue tone stay even when you hand wash gently and keep harsh chemicals off it. A car kept in a garage out of constant sun and rain will hold up longer than one parked outside every day.
Will this wrap damage my paint, or protect it?

It protects it. The vinyl sits on top of your factory paint and takes the daily wear instead, so sun, light scuffs and road grime meet the film first and not the paint. As long as your original paint is sound when you wrap it, the Metallic Grey Blue film shields the surface underneath the whole time it is on.
Matte wrap or a matte respray, which makes more sense?

A wrap is the easier call for most people. A matte paint job costs a lot, takes the car off the road for days, and matte paint is notoriously hard and pricey to repair if it gets marked. This Metallic Grey Blue wrap is cheaper, goes on faster, protects the paint you already have, and peels off later if you want a change.
How do I wash and care for a matte wrap?

This is the big one for matte. Never wax, polish or machine-buff it, because any of those will rub shiny spots into the flat finish and ruin the look. Hand wash only with a matte-safe soap, skip the automatic brush washes, and wipe off fuel splashes or bird mess quickly before they sit. Treated this way the Metallic Grey Blue stays evenly matte across the whole car.
Can I install it myself?

Yes. The film uses a Henkel solvent-based acrylic adhesive with air-release channels, so trapped bubbles push out to the edge instead of sitting under the surface, which makes a DIY job far more forgiving. You can run a dry or wet install. Flat panels are beginner friendly, and a little heat helps the Grey Blue stretch around mirrors and curves.
Does the wrap come off cleanly later?

It does. When you are ready for a change, warm the film and peel it back slowly and it lifts away in sheets. Because the wrap shielded the paint the whole time, you are left with the factory finish you started with, ready for the original color or a fresh wrap.
Will the matte finish stay flat or go shiny over time?

It stays flat as long as you care for it right. Shiny patches on a matte wrap almost always come from wax, polish or a buffer, not from age. Keep those off the Metallic Grey Blue, hand wash it gently, and the surface holds its even non-reflective look.
How much film do I need for my car?

The rolls are 1.52m (5ft) wide and come in 6m, 18m and 23m lengths. A small panel or accent piece fits a 6m roll. A full small car or large sections usually needs 18m, and a full-size SUV, van or truck is safest on 23m. Buying one continuous length keeps the Metallic Grey Blue flake direction consistent across the body.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns