1 / 1

Midnight Cyan Metallic Car Wrap | Gloss Vinyl
$170.00 USD
Size: 1.52*6m(5*20ft)
Color: Midnight Cyan

💪 Hurry up! Only 8 left

Midnight Cyan Metallic Car Wrap | Gloss Vinyl
$170.00 USD
1.52*6m(5*20ft) / Midnight Cyan
View details

Midnight Cyan sits in that deep space between blue and green, a dark teal that pulls light into it. In the shade it reads almost like still water at dusk, calm and close to navy. Roll it into the sun and the fine metal flake wakes up, throwing tiny points of cool blue-green sparkle across every curve of the panel. It is moody and bright at the same time, which is exactly why this color turns heads in a parking lot full of plain paint.

This is a full color change wrap, not a coating you paint on. The gloss face film lays over your factory paint and seals it off from sun, road grime, light scratches, and the daily wear that dulls a finish over time. Your real paint stays protected and untouched underneath, so the look is yours for as long as you want it and gone clean when you are ready for something new.

Side by side of Midnight Cyan metallic vinyl wrap versus a custom metallic respray on a car

Key features

  • Deep metallic sparkle: fine metal flake runs through the color layer, so the finish reads rich in the shade and glints with sparkle in direct sun.
  • Glossy depth: a clear topcoat over the flake gives a wet, glossy shine with real depth, the same look factory metallic paint gets from flake in the basecoat.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.

How a wrapteck metallic wrap works

Cutaway showing how Midnight Cyan metallic gloss wrap is built, from flake color layer to adhesive and liner

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic (fine metal flake)
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Midnight Cyan Metallic Car Wrap | Gloss Vinyl
  • Midnight Cyan Metallic Car Wrap | Gloss Vinyl
  • Midnight Cyan Metallic Car Wrap | Gloss Vinyl
  • Midnight Cyan Metallic Car Wrap | Gloss Vinyl
  • Midnight Cyan Metallic Car Wrap | Gloss Vinyl
  • Midnight Cyan Metallic Car Wrap | Gloss Vinyl
1 / 1

Frequently asked questions

What does the metallic flake actually do on Midnight Cyan?

The flake is fine metal pigment mixed into the color layer of the film. On Midnight Cyan it catches light and throws cool blue-green sparkle, so the panel looks deep and flat in shade but alive and shimmering in direct sun. It gives the color depth that a plain solid color cannot match.
Does the wrap have a rough or grainy texture from the flake?

No. Even though there is metal flake inside the color layer, the gloss face film sits smooth on top. Run your hand over Midnight Cyan and it feels slick and even, just like glossy paint. The sparkle is something you see, not something you feel.
Will wrapping my car damage the paint or actually protect it?

A clean factory finish in good shape is protected, not harmed. The Midnight Cyan film and its air-release adhesive lay over your paint and shield it from sun fade, road grit, and light surface scratches. The paint underneath stays sealed off from daily wear while the wrap is on.
How does a metallic wrap compare to a real metallic respray?

A true metallic-flake respray is expensive, takes your car off the road for days, and is hard to match or fix if it ever gets damaged. Midnight Cyan vinyl costs far less, goes on much faster, protects your original paint instead of replacing it, and peels off clean when you want a change. A respray is permanent. A wrap is not.
How do I wash and care for Midnight Cyan?

Hand washing is best. Use a gentle car shampoo, a soft mitt, and rinse well, then dry with a clean microfiber towel so water spots do not sit on the gloss. Skip harsh solvents and stiff brushes. Keeping the car garaged out of constant sun helps the flake stay bright and the color hold longer.
Can I install this myself with the air-release adhesive?

Yes, this film is built for DIY-friendly installs. The Henkel solvent-based acrylic adhesive has air-release channels that push out bubbles as you squeegee, so you can reposition while you work and avoid trapped air. You can install Midnight Cyan dry or wet. Take your time on curves and use heat to set it and it lays down clean.
Does Midnight Cyan come off cleanly later?

When you are ready for a new look, the wrap removes without tearing up your factory paint. Warm the film with gentle heat and peel it back slowly at a low angle. Because the wrap protected the paint the whole time, what is underneath comes back looking like it did the day you wrapped it.
How much film do I need for my car?

It depends on size. The wrap comes in a 30ft (9m) roll and a 59ft (18m) roll. A small coupe usually needs roughly the shorter length while a sedan, SUV, or truck needs the longer roll, and most people add a little extra for mistakes and complex curves. Measure your panels first or pick the larger roll if you are between sizes.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns