Brewster Green Gloss Car Wrap | Polymeric Vinyl

Regular price $180.00 USD
Size: 1.52*6m(5*20ft)
Color: Brewster Green

🎉 Free Shipping! Ready to ship

Brewster Green Gloss Car Wrap | Polymeric Vinyl
$180.00 USD
1.52*6m(5*20ft) / Brewster Green

Brewster Green is a deep classic green with a wet glass shine. It reads almost black in low light, then opens up into a rich racing green when the sun hits it. This is the color that turns vintage roadsters and modern coupes into head turners, and it lays down as smooth as a fresh paint job without the spray booth.

You get the painted-on gloss look while the film sits on top of your real paint and takes the daily hits for you. Road grime, light scuffs, and sun all land on the wrap instead of the factory finish underneath. When you want a new look later, the vinyl comes off and your original paint is still there.

Brewster Green gloss vinyl wrap shown next to a respray, the wrap option marked cheaper, reversible, and paint protecting.

Key features

  • Painted-on gloss finish: a mirror-gloss topcoat gives the deep wet-paint shine without the cost of a respray.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the gloss topcoat holds up to sun and rain across a -30 to +140 degree range.
  • Easy to keep clean: wipes down and washes like paint, with no special care needed.

How a wrapteck gloss wrap is built

Layer diagram of Brewster Green gloss vinyl, showing the PVC gloss face, acrylic air-release adhesive, and PET liner.

Specifications

Material Polymeric PVC vinyl
Finish Gloss
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

How long does a Brewster Green gloss wrap last?

With normal care this deep green gloss holds up for years. Heat, sun, and harsh washing are what wear any wrap down, so a car that lives in a garage will keep that wet shine longer than one parked outside all day. Hand wash it and keep it out of strong sun when you can and it will reward you.

Will a gloss wrap damage my paint or protect it?

It protects it. The Brewster Green film sits on top of your factory paint and takes the daily scuffs, grit, and sun for you. As long as your existing paint is healthy and well stuck when you wrap, the vinyl shields it rather than harming it.

Brewster Green wrap or a respray, which makes more sense?

A wrap wins for most people. A respray in this kind of deep green costs far more, takes your car off the road for days, and changes your paint forever. Brewster Green vinyl goes on faster, costs less, protects the paint you already have, and peels back off when you want a different look.

How much Brewster Green film do I need for my car?

The rolls are 1.52m wide (about 5ft) and come in 6m, 18m, and 23m lengths. A small car or a single panel job usually works from the 18m roll, while a full sedan or larger vehicle is safer on the 23m roll so you have margin for mistakes and matching. Measure your panels and add a little extra for door edges and wrap-ins.

Can I install Brewster Green myself?

Yes, many DIY installers do. The Henkel air-release adhesive lets trapped air escape through tiny channels, so you get fewer bubbles and can reposition the film as you go. Work clean, use heat on the curves, and take your time on bumpers and mirrors. You can install it dry or wet depending on what you are comfortable with.

Does Brewster Green vinyl come off cleanly?

It does when removed correctly. Warm the panel gently and pull the film back at a low angle and it lifts away. On sound factory paint it leaves little to no residue, and any light glue left behind wipes off with adhesive remover. That clean removal is the whole point of choosing a wrap over paint.

How do I wash and care for a Brewster Green wrap?

Hand wash with a soft mitt and a pH neutral car soap, then rinse and dry with a clean microfiber towel. Skip harsh brushes and automatic car washes, and treat fuel spills or bird droppings fast so they do not sit on the surface. Gentle care is what keeps this green looking glassy.

Will the gloss fade over time?

This film is built to hold its color and shine, and it handles temperatures from -30 up to +140 C. Like any finish, constant sun is the enemy, so parking in shade or a garage keeps the Brewster Green deep and glossy for longer. Good washing habits help too.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns