1 / 1

Emerald Green Metallic Car Wrap | Metallic Car Film
$200.00 USD
Size: 1.52*6m(5*20ft)
Color: Meecedes Emerald Green

🎉 Free Shipping! Ready to ship

Emerald Green Metallic Car Wrap | Metallic Car Film
$200.00 USD
1.52*6m(5*20ft) / Meecedes Emerald Green
View details

Emerald Green is a deep jewel-tone green with fine metal flake worked into the color layer. In the shade it reads as a rich, almost forest-dark green with a glassy gloss top. Roll the car into direct sun and the flake wakes up, throwing tiny sparkles across the panels and giving the green a lively, three-dimensional depth that flat paint cannot match. The color shifts with the light all day, which is exactly why people pick a metallic finish over a plain one.

This is a full color-change wrap, so it lays right over your existing paint and changes the look of the whole car. While it is on, it also takes the daily hits for you, shielding the factory finish from light scuffs, sun, and road grime. When you want a different look later, it comes back off and your original paint is still there underneath.

Side by side of a car in glossy Emerald Green metallic vinyl wrap next to the cost of a custom metallic respray

Key features

  • Deep metallic sparkle: fine metal flake runs through the color layer, so the finish reads rich in the shade and glints with sparkle in direct sun.
  • Glossy depth: a clear topcoat over the flake gives a wet, glossy shine with real depth, the same look factory metallic paint gets from flake in the basecoat.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.

How a wrapteck metallic wrap works

Cross section showing how the Emerald Green metallic wrap works, with gloss top layer, metal-flake color layer, adhesive, and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic (fine metal flake)
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Emerald Green Metallic Car Wrap | Metallic Car Film
  • Emerald Green Metallic Car Wrap | Metallic Car Film
  • Emerald Green Metallic Car Wrap | Metallic Car Film
  • Emerald Green Metallic Car Wrap | Metallic Car Film
  • Emerald Green Metallic Car Wrap | Metallic Car Film
  • Emerald Green Metallic Car Wrap | Metallic Car Film
1 / 1

Frequently asked questions

What does the metallic flake actually do on Emerald Green?

The flake sits inside the green color layer and catches light. In shade you get a deep, solid emerald. In sunlight the tiny flakes light up and add sparkle and depth, so the green looks alive and shifts as you walk around the car. A non-metallic green stays flat by comparison.
Does the wrap feel rough or textured because of the flake?

No. The flake is in the color layer, not on the surface. The top of this Emerald Green wrap is a smooth gloss film, so it feels slick to the touch and washes like a glossy painted panel. The sparkle is something you see, not something you feel.
Will wrapping hurt my paint, or does it protect it?

A proper wrap protects the paint. The Emerald Green film covers your factory finish and takes the daily wear instead, so light scuffs, sun, and grime hit the vinyl first. As long as the paint underneath is in good shape and fully cured before you wrap, it stays protected while the film is on.
How is this different from getting a metallic respray?

A real metallic-flake respray is expensive, takes your car off the road for a while, and is hard to color match if you ever need a repair. This Emerald Green wrap costs far less, goes on much faster, and peels off when you want a change. It also leaves your original paint intact, which a respray cannot do.
How do I wash and care for the Emerald Green wrap?

Hand wash with a mild soap and a soft mitt, then rinse and dry with a clean microfiber. Skip harsh solvents and stiff brushes that can dull the gloss. Get bird droppings and fuel spills off quickly. The film handles heat from -30 to +140 C, and a wrap kept in a garage out of constant sun will hold its shine longer.
Can I install this myself?

Yes, many people do. The film uses a Henkel solvent-based acrylic adhesive with air-release channels, so air bubbles push out to the edge instead of trapping, which makes it far more forgiving for a first-timer. You can run a dry or wet install. Flat panels are straightforward; deep curves and recesses take patience and a little heat.
Does the wrap come off cleanly later?

When you are ready for a new look, the Emerald Green film is made to be removed. Warm it gently and peel at a low angle and it lifts off without taking your paint with it. Healthy, fully cured factory paint is left behind clean and ready for whatever you wrap next.
How much film do I need for my car?

It depends on the size of the vehicle and how much you are covering. A small car or a partial job like the roof and hood needs less, while a full wrap on a larger vehicle needs more. This Emerald Green comes in 30ft (9m) and 59ft (18m) roll lengths, and it is smart to add a little extra for mistakes, door jambs, and practice.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns