Satin Matte Army Green PPF | Self-Healing TPU Film

Regular price $260.00 USD
Size: 1.52*3m(5*9.8ft)
Color: Satin Army Green
Decal installation method: Wet apply

🎉 Free Shipping! Ready to ship

Satin Matte Army Green PPF | Self-Healing TPU Color Film
$260.00 USD
1.52*3m(5*9.8ft) / Satin Army Green / Wet apply

Satin Matte Army Green PPF delivers a smooth, low-glare matte look that reads modern and understated in any light. It gives factory paint the kind of finish that turns heads in a parking lot, without the plasticky look of cheap film.

The color here does two jobs at once. This is color paint protection film, not vinyl, so the same layer that gives you the color also takes the hits. Rock chips, road grime, light scratches, bug splatter and wash swirls land on the film instead of your factory paint. You get the color you want, and the original paint stays sealed and safe underneath.

Side-by-side comparison: Satin Matte Army Green PPF color PPF vs thinner decorative vinyl wrap

Key features

  • Self-healing topcoat: minor scratches and swirl marks fade out with heat from the sun or a heat gun.
  • Hydrophobic surface: water and dirt bead off instead of sticking, so the film stays cleaner for longer.
  • Acid rain and oxidation resistant: holds up against acid rain, oxidation and yellowing over years of daily driving.
  • Stain and penetration resistant: bird droppings, tree sap and grease do not soak into the film.
  • Flexible and tear resistant: high elongation and tensile strength let it stretch over curves without cracking.
  • Mirror-gloss finish: the glass-crystal top layer boosts paint depth and gloss by up to 40 percent and smooths out orange peel.
  • Removable adhesive: peels off cleanly with heat, with no glue residue left behind.
  • Bubble-free install: designed to lay flat without bubbling, warping or lifting at the edges.

The Wrapteck 3-layer TPU structure

 

Cutaway of the 3-layer Satin Matte Army Green PPF TPU paint protection film showing topcoat, color resin layer and adhesive

 

Specifications

Material TPU (thermoplastic polyurethane)
Thickness 7.5mil (330 ± 10µm)
Structure 3 layers
Raw material Lubrizol TPU resin
Adhesive Ashland acrylic adhesive
Topcoat Cashew-based coating
Application Dry & Wet Installation
Roll width 1.52m (5ft)
Roll lengths 3m, 6m, 9m and 15m
Warranty 2 years
Expected service life Up to 8 years

Lab test report

Performance level Premium Material

TPU—Thermoplastic Polyurethane Elastomer

Temperature resistance -40°c to +120°c Surface Type Anti-scratch TPU PPF Car Surface Protection Film
Film thickness (with glue) 140micron Release paper 140g/m2, Silicone coated with air channels
Adhesive thickness 30μm

 

Adhesive

Henkel solvent-based Acrylic-based, repositionable, slidable
Adhesive type Pressure-sensitive Texture Effect Anti-scratch  Color TPU PPF Car Surface Protection Film
Adhesive power 18N/25mm Adhesive features Air-Release, Permanent, Removable
Heat temperature More than +120°c Tensile strength Along: min. 19Mpa, Across: min 19Mpa
Application method Dry & Wet Installation Application surface Compound curves, Concave surfaces, Corrugations, Flat, Simple curves
Removability Removable with heat Elongation Along: min. 130%, Across: min. 150%
Application temperature +8°C minimum (air and substrate) Application Cars & Vans, Trucks, Watercraft, Laptop, Cell phones, Wall, Furniture etc.
Expected Durability 8 years Features Stretchable, Removable, UV proof, Weather proof, Water proof, Resistant to solvents, Easy cleaning, Easy maintenance, Stylish, can stick any where

 

Maybe you want to know

PPF, TPU, and TPH: What Each One Does and Which One Your Car Needs

Does PPF Yellow? What Causes It and How to Keep Film Clear

Vinyl Wrap vs PPF: Which One Your Car Needs, and When

PPF vs Vinyl Wrap: Cost, Protection and Which to Choose

 

New to wrapping?

If this is your first film, start with our guide on how to wrap a car. This is a wet-install film, so you can do panels and accents at home, and a professional installer is the safest route for a full-car wrap.

Product specifications table
Specification name Specification Value
Color pattern Green
Translation missing: en.metafields.shopify.decal-installation-method Wet apply, Dry apply
Decoration material TPU
Vehicle application area Vinyl, Exterior, Interior
Vehicle decor features Scratch resistant, UV resistant, Waterproof, Heat resistant, Easy to apply, Self Healing, Sand Proof, Removable, Stretchable
Vehicle type Car, Recreational vehicle, Watercraft, Van, Truck, SUV, Motorcycle, Golf cart, Mirco, Hatch, Convertible, Coupe, Sedan, Pickck Truck

Frequently asked questions

How long does Satin Matte Army Green PPF last?

With normal care you can expect 7 to 10 years of service from this film, and it carries an 8-year warranty. The 7.5mil TPU build and cashew topcoat hold up to daily driving, so the satin army green finish stays even and intact for years rather than peeling or cracking early.

What is the difference between this color PPF and a vinyl wrap?

A vinyl wrap only decorates. It changes the color but adds almost no protection. This Satin Matte Army Green film is real paint protection film, so it gives you the same matte green color while also taking the rock chips, grit, and bug acid that would otherwise hit your factory paint. You get the look and the shield in one film.

Does the satin matte finish self-heal?

Yes. The cashew topcoat is self-healing, so light swirls and fine scratches fade out with heat from the sun or warm water. The finish stays a clean satin matte the whole time. The topcoat heals the scratch without turning that spot glossy, so the flat army green look stays consistent across the panel.

Will the army green color fade in the sun?

The film blocks 95 to 98 percent of UV, which is what protects the pigment from sun damage. That UV barrier is the main reason the satin matte green holds its tone instead of washing out or going chalky over years of sun exposure.

Does this film remove cleanly later?

Yes. When you want a change, the film comes off without harming the factory paint underneath. Because it has been shielding your paint the whole time, the original surface is usually in better shape than it would be with no film at all.

How much film do I need for my car?

The roll is 1.52m wide and comes in 3m, 6m, 9m, and 15m lengths. A full small car usually needs around the 15m length, while bumpers, hoods, and accent panels can be done with the shorter rolls. Measure the panels you plan to cover and add a little extra for trimming and wrapped edges.

Can I install Satin Matte Army Green PPF myself?

Yes, with patience. This is a wet install film, so you lay it over a soapy water layer that lets you slide it into place and squeegee out the solution before it sets. Home installers handle flat and gentle panels well. Tight curves and deep recesses take more practice, so plan your panels before you start.

Will the matte finish look uneven after washing?

No. Hand wash with a soft mitt and pH neutral soap and the satin matte army green stays even across the whole car. Skip wax and gloss products since those are made for shiny finishes and can leave streaks on a matte surface. A simple wash and rinse keeps the flat look clean.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns