Mint Green Super Gloss Car Wrap | Polymeric Vinyl

Regular price $180.00 USD
Size: 1.52*6m(5*20ft)
Color: Mint Green

🎉 Free Shipping! Ready to ship

Mint Green Super Gloss Car Wrap | Polymeric Vinyl
$180.00 USD
1.52*6m(5*20ft) / Mint Green

Mint Green lands somewhere between fresh and retro. It is a soft pastel green with a clean wet shine, the kind of color that looks calm in the shade and pops the second sunlight hits it. On a coupe, a van, or a daily runabout it reads playful without trying too hard, and the gloss face gives the whole panel that just painted depth.

This is a color wrap, not just a coat of shine. The polymeric vinyl lays a full layer of Mint Green over your factory paint, so the original surface stays sealed away from road grime, light scuffs, and sun while you drive the color you actually want. Want the factory finish back later? The film comes off and the paint underneath is still the paint you started with.

Car panel half wrapped in Mint Green gloss vinyl and half resprayed, showing the wrap as the cheaper reversible way to change color

Key features

  • Painted-on gloss finish: a mirror-gloss topcoat gives the deep wet-paint shine without the cost of a respray.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the gloss topcoat holds up to sun and rain across a -30 to +140 degree range.
  • Easy to keep clean: wipes down and washes like paint, with no special care needed.

How a wrapteck gloss wrap is built

Layer diagram of Mint Green gloss vinyl wrap showing the PVC color face, air-release adhesive, and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Gloss
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

How long does a Mint Green gloss wrap last?

With normal washing and basic care this Mint Green film holds its gloss for years. Heat, harsh sun, and constant weather are what wear any wrap down over time, so a car that sleeps in a garage will keep that fresh mint shine longer than one parked outside all day. Treat it like paint and it rewards you.

Will a wrap damage my paint, or does it protect it?

It protects it. The Mint Green vinyl sits on top of your factory paint and takes the daily wear for you, things like light scuffs, road film, and sun. The paint underneath stays sealed and clean. The one rule is that your existing paint needs to be in solid shape and well bonded before wrapping, since the film grips whatever is under it.

Mint Green gloss wrap or a respray, which makes more sense?

A respray in a pastel like this is expensive, permanent, and ties up your car for days. This Mint Green wrap costs far less, goes on much faster, and it is reversible. You also keep your original paint protected underneath, which helps if you ever sell the car or just want the stock color back. For a bold color change without the commitment, the wrap wins.

How much film do I need for my car?

The rolls are 1.52m (5ft) wide and come in 6m, 18m, and 23m lengths. A small section like a roof or hood usually fits in the 6m. A full small to mid car typically needs the 18m, and a larger vehicle or anyone wanting extra for mistakes and complex curves should go with the 23m. When unsure, size up, since leftover Mint Green is far better than coming up short mid panel.

Can I install this myself?

Yes, plenty of DIY installers do. The Henkel solvent-based acrylic adhesive is air-release, so the channels in the glue let trapped air escape and you can reposition the film as you work instead of fighting bubbles. You can install dry or wet. Mint Green shows fingerprints and creases like any light color, so clean hands, a clean panel, and a little patience go a long way.

Does the wrap come off cleanly later?

It does. When you are ready for a change, the Mint Green film peels away and, on healthy factory paint, leaves the surface as you found it. Warming the vinyl with a heat source first makes removal easier and cleaner. That clean takedown is the whole point of a wrap over a permanent respray.

How do I wash and care for it?

Treat it like paint. Hand wash with a gentle car soap and a soft mitt, then rinse and dry so you do not get water spots on the gloss. Skip harsh solvents and aggressive brushes. Knock off bird droppings, fuel splash, and bug splatter quickly, since light pastel greens can stain if you leave that stuff sitting in the sun.

Will the gloss fade over time?

Like any colored film, long term sun and weather can slowly soften a finish, and lighter shades show it less harshly than dark ones. Keeping the Mint Green clean and parking out of constant direct sun when you can will hold that glossy depth for the long haul. The vinyl also rates for heat from -30 to +140 C, so normal weather swings are no problem.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns