True Gloss Metallic Car Wrap | PET Liner Vinyl

Regular price $200.00 USD
Size: 1.52*6m(5*20ft)
Color: Gentian Blue

🎉 Free Shipping! Ready to ship

True Gloss Metallic Car Wrap | PET Liner Vinyl
$200.00 USD
1.52*6m(5*20ft) / Gentian Blue

Watch the fine metal flake light up as the car rolls past. True Gloss Metallic lays down a deep, mirror-like shine that throws back the sun and softens to a rich glow in the shade, so the body looks like it was sprayed by a high-end shop.

This is a polymeric PVC vinyl with a gloss metallic face, not a respray. The flake sits under the surface for that liquid-paint depth, and because it is a wrap you can take it back to the factory finish or change the look later without touching the paint underneath.

Key features

  • Gloss metallic finish with fine metal flake for a deep, mirror-like shine in direct light.
  • Polymeric PVC face film at 4.1mil, built to wrap full panels and tight curves.
  • Henkel solvent-based acrylic air-release adhesive at 1.6mil for clean positioning and a strong, even bond.
  • PET plastic release liner with double-layer lamination and a super air-release exhaust channel, so air pushes out for a smooth, orange-peel-free finish.
  • The PET liner stretches and the metallic color holds when stretched, keeping the flake even over contours and recesses.
  • Handles real-world temperatures from -30 to +140C and installs dry or wet. Available in 30ft (9m) and 59ft (18m) rolls.
Side-by-side graphic comparing a True Gloss Metallic vinyl wrap with an expensive metallic respray, showing the wrap as reversible, faster to apply, and changeable while the respray is permanent.

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic (fine metal flake)
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install
Diagram showing how fine metal flake under the gloss surface of the vinyl catches and scatters sunlight, giving a bright sparkle in direct sun and a deeper glow in the shade.

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

How does the flake look in sun versus shade?

In direct sun the fine metal flake sparkles and the gloss reads bright and mirror-like. In the shade it calms into a deeper, richer tone with a soft glow. The shift between the two is what gives True Gloss Metallic its expensive, hand-sprayed look.

Can I use this on a full car or just on accents?

Both. The 4.1mil polymeric face film and the stretchy PET liner let it wrap full panels and curves, and the rolls come in 30ft (9m) and 59ft (18m) lengths for full builds. It also works great on a roof, hood, mirrors, or trim if you only want metallic accents.

Does it remove cleanly later?

Yes. This is a wrap, not a respray, so it lifts off and returns the panel to the finish that was under it. The Henkel air-release adhesive is made to bond strong while in place and come away without harming sound factory paint, so you can revert or change the color later.

How do I wash a gloss metallic wrap?

Hand wash with a soft mitt, pH-neutral soap, and clean water, then dry with a microfibre towel to keep the gloss clear. Rinse off road grit before you wipe so the flake surface stays smooth. Skip harsh brushes and aggressive cleaners that can dull the shine.

Should I install it dry or wet?

Both methods work. Dry install is faster and lets the super air-release channel push trapped air out for a clean lay-down. A wet install gives you more time to slide and position large panels. Pick the one that suits your skill level and the size of the panel.

How is this different from a solid gloss wrap?

A solid gloss wrap gives you one flat, even color. True Gloss Metallic adds fine metal flake under the gloss, so the surface has depth and sparkle that move with the light. It reads more like real metallic paint than a plain gloss film does.

How does it compare to a metallic respray?

A metallic respray is permanent, costly, and ties up the car for a long time. This wrap gives a similar deep metallic gloss, installs far faster, can be removed, and lets you change the color down the road. You get the look without committing your paint.

Will the metallic finish hold up over time?

The gloss face film and flake are built to keep their shine through normal driving, sun, and temperatures from -30 to +140C. Wash it gently and park out of harsh conditions when you can, and the mirror-like gloss and sparkle stay looking fresh.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns