1 / 1

Cream Red Pearlescent PPF | Self-Healing TPU Color Film
$260.00 USD
Size: 1.52*3m(5*9.8ft)
Color: Cream Red White

🎉 Free Shipping! Ready to ship

Cream Red Pearlescent PPF | Self-Healing TPU Color Film
$260.00 USD
1.52*3m(5*9.8ft) / Cream Red White
View details

Cream Red Pearlescent gives your car a soft, milky red that warms up under sunlight and cools to a pale pearl in shade. The fine pearl flakes catch the light at different angles, so the panel never looks flat. It reads creamy and refined up close, then glows with a gentle red shimmer as you walk around it. This is a finish for people who want something different from flat gloss or matte, without going loud.

It is color and protection in one film. While the pearl pigment changes the look of your car, the 7.5mil (330um) TPU layer takes the hits that would otherwise reach your factory paint. Rock chips, road grit, light scratches, bird droppings and bug acid all land on the film instead of your clearcoat. You get the new color you want and the original paint stays sealed and safe underneath.

Cream Red Pearlescent color PPF compared to standard vinyl wrap, showing the thicker paint-protecting TPU film

Key features

  • Self-healing topcoat: minor scratches and swirl marks fade out with heat from the sun or a heat gun.
  • Hydrophobic surface: water and dirt bead off instead of sticking, so the film stays cleaner for longer.
  • Acid rain and oxidation resistant: holds up against acid rain, oxidation and yellowing over years of daily driving.
  • Stain and penetration resistant: bird droppings, tree sap and grease do not soak into the film.
  • Flexible and tear resistant: high elongation and tensile strength let it stretch over curves without cracking.
  • Mirror-gloss finish: the glass-crystal top layer boosts paint depth and gloss by up to 40 percent and smooths out orange peel.
  • Removable adhesive: peels off cleanly with heat, with no glue residue left behind.
  • Bubble-free install: designed to lay flat without bubbling, warping or lifting at the edges.

The Wrapteck 3-layer TPU structure

Three-layer TPU structure of Cream Red Pearlescent PPF with self-healing topcoat, pigment layer and adhesive

Specifications

Material TPU (thermoplastic polyurethane)
Thickness 7.5mil (330 ± 10µm)
Structure 3 layers
Raw material Lubrizol TPU resin
Adhesive Ashland acrylic adhesive
Topcoat Cashew-based coating
Application Wet install
Roll width 1.52m (5ft)
Roll lengths 3m, 6m, 9m and 15m
Warranty 8 years

Lab test report

Test Result Method
Thickness 330 ± 10µm Mitutoyo thickness meter
Elongation at break 100N ASTM D624-2000
Puncture resistance >15N GB/T 10004
Tensile strength 25MPa ASTM D638-2014
Finished film elongation >300% ASTM D882
Max operating temperature 100°C to 120°C GB/T 7141-2008
Anti-yellowing B value <5 GB/T 16422.3-2014, QUV 5000 hours
Adhesive hold strength >2200g GB/T 4851
UV resistance 95% to 98% blocked GB/T 2680
Gloss level 95GU 3NH gloss meter, 60 degree

New to wrapping?

If this is your first film, start with our guide on how to wrap a car. This is a wet-install film, so you can do panels and accents at home, and a professional installer is the safest route for a full-car wrap.
Color pattern Red, white
Decoration material Vinyl, TPU
Vehicle application area Exterior, Vinyl
Vehicle decor features Scratch resistant, UV resistant, Stretchable, Removable, Sand Proof, Self Healing, Waterproof, Heat resistant, Easy to apply
Vehicle type Car, Pickck Truck, Sedan, Coupe, Convertible, Hatch, Mirco, Golf cart, Recreational vehicle, Watercraft, Van, Truck, SUV, Motorcycle
  • Cream Red Pearlescent PPF | Self-Healing TPU Color Film
  • Cream Red Pearlescent PPF | Self-Healing TPU Color Film
  • Cream Red Pearlescent PPF | Self-Healing TPU Color Film
  • Cream Red Pearlescent PPF | Self-Healing TPU Color Film
  • Cream Red Pearlescent PPF | Self-Healing TPU Color Film
1 / 1

Frequently asked questions

How long does Cream Red Pearlescent PPF last on my car?

With normal driving and basic care you can expect 7 to 10 years of service from this film, and it is backed by an 8-year warranty. The cashew topcoat and TPU base are built to hold the pearl finish through sun, rain and wash cycles without cracking or peeling.
What is the difference between this colored PPF and a vinyl wrap?

A vinyl wrap only changes the color. This Cream Red Pearlescent film changes the color and protects the paint at the same time. At 7.5mil (330um) it is much thicker than vinyl and absorbs rock chips and scratches that vinyl would let through to your clearcoat. You get the pearl look plus real paint protection in a single layer.
Does the self-healing topcoat really work on this film?

Yes. Light swirl marks and fine scratches in the topcoat close up on their own with heat from the sun or warm water. That means the cream pearl surface keeps its smooth, even glow instead of collecting wash scratches over time.
Will the cream and red pearl colors fade in the sun?

The film blocks 95 to 98 percent of UV, which is what causes color to wash out. That UV shield keeps the pearl pigment stable, so the cream and red tones stay true year after year instead of going dull or yellow.
Can I remove the film later without damaging my paint?

Yes. When you want a change, the film peels off cleanly and leaves your factory paint as it was on day one. Because your original color sat protected under the Cream Red Pearlescent layer the whole time, the paint underneath stays fresh and unmarked.
How much film do I need for my car?

The roll is 1.52m wide and comes in 3m, 6m, 9m and 15m lengths. A full small car usually needs around 15m to 18m, while single panels like a hood or roof fit within a 3m or 6m roll. If you are unsure, measure the panels you plan to cover and add a little margin for trimming.
Can I install Cream Red Pearlescent PPF myself?

Many DIY installers do. This is a wet install film, so you lay it down with slip solution that lets you slide and reposition the sheet before you squeegee it flat. Flat panels like a roof or hood are the easiest place to start. Curved bumpers take more patience, so go slow and work in sections.
Does the pearl effect look the same in every light?

No, and that is the point. In direct sun the red pearl warms up and shimmers, while in shade or cloud the finish settles into a softer cream. The shift is what gives this color its depth, so it looks different and alive depending on where your car is parked.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns