1 / 1

Grass Green to Red Color Shift PPF | Self-Healing TPU Film
$260.00 USD
Size: 1.52*3m(5*9.8ft)
Color: Grass Green Red
Decal installation method: Wet apply

🎉 Free Shipping! Ready to ship

Grass Green to Red Color Shift PPF film roll close-up showing the finish
$260.00 USD
1.52*3m(5*9.8ft) / Grass Green Red / Wet apply
View details

Grass Green to Red Color Shift PPF delivers a color that shifts tone as the light and viewing angle move across the panel. It gives factory paint the kind of color change that turns heads in a parking lot, without the plasticky look of cheap film.

The color here does two jobs at once. This is color paint protection film, not vinyl, so the same layer that gives you the color also takes the hits. Rock chips, road grime, light scratches, bug splatter and wash swirls land on the film instead of your factory paint. You get the color you want, and the original paint stays sealed and safe underneath.

Side-by-side comparison: Grass Green to Red Color Shift PPF color PPF vs thinner decorative vinyl wrap

Key features

  • Self-healing topcoat: minor scratches and swirl marks fade out with heat from the sun or a heat gun.
  • Hydrophobic surface: water and dirt bead off instead of sticking, so the film stays cleaner for longer.
  • Acid rain and oxidation resistant: holds up against acid rain, oxidation and yellowing over years of daily driving.
  • Stain and penetration resistant: bird droppings, tree sap and grease do not soak into the film.
  • Flexible and tear resistant: high elongation and tensile strength let it stretch over curves without cracking.
  • Mirror-gloss finish: the glass-crystal top layer boosts paint depth and gloss by up to 40 percent and smooths out orange peel.
  • Removable adhesive: peels off cleanly with heat, with no glue residue left behind.
  • Bubble-free install: designed to lay flat without bubbling, warping or lifting at the edges.

The Wrapteck 3-layer TPU structure

 

Cutaway of the 3-layer Grass Green to Red Color Shift PPF TPU paint protection film showing topcoat, color resin layer and adhesive

 

Specifications

Material TPU (thermoplastic polyurethane)
Thickness 7.5mil (330 ± 10µm)
Structure 3 layers
Raw material Lubrizol TPU resin
Adhesive Ashland acrylic adhesive
Topcoat Cashew-based coating
Application Wet install
Roll width 1.52m (5ft)
Roll lengths 3m, 6m, 9m and 15m
Warranty 2 years
Expected service life Up to 8 years

Lab test report

Performance level Premium Material

TPU—Thermoplastic Polyurethane Elastomer
Temperature resistance -40°c to +120°c Surface Type Anti-scratch TPU PPF Car Surface Protection Film
Film thickness (with glue) 140micron Release paper 140g/m2, Silicone coated with air channels
Adhesive thickness 30μm

 

Adhesive

 Henkel solvent-based Acrylic-based, repositionable, slidable
Adhesive type Pressure-sensitive Texture Effect Anti-scratch  Color TPU PPF Car Surface Protection Film
Adhesive power 18N/25mm Adhesive features Air-Release, Permanent, Removable
Heat temperature More than +120°c Tensile strength Along: min. 19Mpa, Across: min 19Mpa
Application method Dry & Wet Installation Application surface Compound curves, Concave surfaces, Corrugations, Flat, Simple curves
Removability Removable with heat Elongation Along: min. 130%, Across: min. 150%
Application temperature +8°C minimum (air and substrate) Application Cars & Vans, Trucks, Watercraft, Laptop, Cell phones, Wall, Furniture etc.
Expected Durability 8 years Features Stretchable, Removable, UV proof, Weather proof, Water proof, Resistant to solvents, Easy cleaning, Easy maintenance, Stylish, can stick any where

 

Maybe you want to know

PPF, TPU, and TPH: What Each One Does and Which One Your Car Needs

Does PPF Yellow? What Causes It and How to Keep Film Clear

Vinyl Wrap vs PPF: Which One Your Car Needs, and When

PPF vs Vinyl Wrap: Cost, Protection and Which to Choose

 

New to wrapping?

If this is your first film, start with our guide on how to wrap a car. This is a wet-install film, so you can do panels and accents at home, and a professional installer is the safest route for a full-car wrap.
Color pattern Green, Red
Translation missing: en.metafields.shopify.decal-installation-method Wet apply, Dry apply
Decoration material TPU
Vehicle application area Exterior, Vinyl, Interior
Vehicle decor features Scratch resistant, UV resistant, Waterproof, Heat resistant, Easy to apply, Self Healing, Sand Proof, Removable, Stretchable
Vehicle type Car, Golf cart, Recreational vehicle, Watercraft, Van, Truck, SUV, Motorcycle, Mirco, Hatch, Convertible, Coupe, Sedan, Pickck Truck
  • Grass Green to Red Color Shift PPF film roll close-up showing the finish
  • Grass Green to Red Color Shift PPF on an electric SUV coupe, front view
  • Grass Green to Red Color Shift PPF on an electric SUV coupe, rear three-quarter view
  • Grass Green to Red Color Shift PPF on an electric SUV coupe, front three-quarter view
  • Grass Green to Red Color Shift PPF on an electric SUV coupe, side view
1 / 1

Frequently asked questions

How long does this color shift film last on my car?

It carries an 8-year warranty. The cashew topcoat keeps the green to red flip looking sharp through sun, rain, and daily driving for years before you ever think about removing it.
Is this colored PPF different from a vinyl wrap?

Yes, and the difference matters. A vinyl wrap only sits on top and decorates. This is a 7.5mil (330um) TPU paint protection film, so it gives you the grass green to red color shift and absorbs rock chips and scratches at the same time. Vinyl cannot protect your paint. This does both.
Does the film really self-heal scratches?

It does. The self-healing topcoat pulls light swirl marks and fine scratches back out with heat. Park in the sun or run warm water over the panel and small marks fade on their own, so the color shift stays clean instead of getting dull and hazy.
Will the green and red colors fade over time?

No quick fading. The film blocks 95 to 98 percent of UV, which is what burns color out of cheaper films. That UV block is why the green to red flip holds its depth for years instead of going washed out and chalky after a couple of summers.
Can I take it off later without wrecking my paint?

Yes. When you are ready for a change, the film removes cleanly with heat and a steady pull. It lifts off without tearing up the factory paint underneath, which is one of the best reasons to run color shift PPF instead of a repaint.
How much film do I need to wrap my car?

The roll is 1.52m wide and comes in 3m, 6m, 9m, and 15m lengths. A bike or small accents take one of the shorter rolls. A full sedan usually runs around the 15m length. If you are between sizes, size up so you have margin for the curves and panels.
Can I install this myself or do I need a shop?

DIY is doable. This is a wet install film, so you lay down slip solution, position the panel, and squeegee the water out. Flat panels and accent pieces are very beginner friendly. For deep curves and full hoods, take your time or hand the big panels to an installer.
Will the color shift look the same in photos as in person?

Photos catch one angle, but in person the flip is the whole point. The film moves through grass green, teal, and red as you walk around the car and as the light changes through the day. Expect it to look richer and more alive than any single photo can show.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns