Metallic Midnight Purple PPF | Self-Healing TPU Color Film
🎉 Free Shipping! Ready to ship
Metallic Midnight Purple shifts between a deep near-black violet in the shade and a rich sparkling purple under direct light. The fine metallic flake catches the sun and gives the car real depth, so the color reads bold up close and clean from across the lot. It works on everything from a daily sedan to a show build, and it pairs especially well with black or chrome trim.
This is paint protection film, not vinyl. While it lays down that custom purple finish, the same 7.5mil TPU layer is taking the hits from rock chips, road grime, bug acid, and scratches. You change the color of your car and shield the factory paint underneath at the same time, with one film.

Key features
- Self-healing topcoat: minor scratches and swirl marks fade out with heat from the sun or a heat gun.
- Hydrophobic surface: water and dirt bead off instead of sticking, so the film stays cleaner for longer.
- Acid rain and oxidation resistant: holds up against acid rain, oxidation and yellowing over years of daily driving.
- Stain and penetration resistant: bird droppings, tree sap and grease do not soak into the film.
- Flexible and tear resistant: high elongation and tensile strength let it stretch over curves without cracking.
- Mirror-gloss finish: the glass-crystal top layer boosts paint depth and gloss by up to 40 percent and smooths out orange peel.
- Removable adhesive: peels off cleanly with heat, with no glue residue left behind.
- Bubble-free install: designed to lay flat without bubbling, warping or lifting at the edges.
The Wrapteck 3-layer TPU structure

Specifications
| Material | TPU (thermoplastic polyurethane) |
| Thickness | 7.5mil (330 ± 10µm) |
| Structure | 3 layers |
| Raw material | Lubrizol TPU resin |
| Adhesive | Ashland acrylic adhesive |
| Topcoat | Cashew-based coating |
| Application | Wet install |
| Roll width | 1.52m (5ft) |
| Roll lengths | 3m, 6m, 9m and 15m |
| Warranty | 8 years |
Lab test report
| Test | Result | Method |
|---|---|---|
| Thickness | 330 ± 10µm | Mitutoyo thickness meter |
| Elongation at break | 100N | ASTM D624-2000 |
| Puncture resistance | >15N | GB/T 10004 |
| Tensile strength | 25MPa | ASTM D638-2014 |
| Finished film elongation | >300% | ASTM D882 |
| Max operating temperature | 100°C to 120°C | GB/T 7141-2008 |
| Anti-yellowing | B value <5 | GB/T 16422.3-2014, QUV 5000 hours |
| Adhesive hold strength | >2200g | GB/T 4851 |
| UV resistance | 95% to 98% blocked | GB/T 2680 |
| Gloss level | 95GU | 3NH gloss meter, 60 degree |
New to wrapping?
If this is your first film, start with our guide on how to wrap a car. This is a wet-install film, so you can do panels and accents at home, and a professional installer is the safest route for a full-car wrap.
2) Low MOQ. The MOQ in our company is one roll. If your order reaches more than 25 rolls, it could be shipped by sea.
3) Mixed color and item shipment. You could choose as many colors or items as you like and could combine them to ship together.
4) Have passed the SGS authentication by Alibaba.(Please kindly refer to the attachment with many thanks).
5) There are economic series and high-level series of wraps in our factory to meet different customers' demands.
6) Customized service: the outer cartons and backing paper could be made with your customized designs.
7) No warehouse storage risk for you. Our warehouse is your warehouse.
8) Besides the products, we also have a professional sales team to give you good marketing suggestions.
Wrapteck vinyl wrap have ROHS certificate, 6000sqm car vinyl wrpping plant with advanced modern equipment and brilliant development abilities.Environmental protection fabric, imported glue.
All of the fabrics adhere to EU RoHS regulations. Wrapteck automobile vinyl wrapping paper does not release any toxic chemicals or airborne harmful substances under normal conditions.
The imported glue with a 3 mil thickness is ideal for installation and repositioning, since it is slippery, movable, and leaves no residue.
Smart installation, saving labor and money.
Water cube and generous airway technology are used in Wrapteck vehicle packaging paper, which also features imported adhesive and is repositionable. In 4.5 hours,
we measured the average installation time of two installations (compared to 9-12 hours). Thin time films will lower your labor costs and increase your competitiveness.
Labor accounts for 80% of the average overall packaging cost.
140-160gsm backing paper with scale grid.
The design of the 140-160gsm backing paper makes it simple to store automotive packing, and it may be resold after a lengthy period of storage. It's simple to cut the scale grid. Your logo can be printed on any vinyl.
Firm Packaging.
To sell these automotive vinyl wrappers again, our box is made of a sturdy double wallpaper (K = K), which will ensure that the packaging is shipped correctly.
| Specification name | Specification Value |
|---|---|
| Color pattern | Purple |
| Decoration material | Vinyl, TPU |
| Vehicle application area | Exterior, Vinyl |
| Vehicle decor features | Scratch resistant, UV resistant, Waterproof, Heat resistant, Easy to apply, Self Healing, Sand Proof, Removable, Stretchable |
| Vehicle type | Car, Golf cart, Recreational vehicle, Watercraft, Van, Truck, SUV, Motorcycle, Mirco, Hatch, Convertible, Coupe, Sedan, Pickck Truck |
SUGGEST SIZE GUIDE
- Mirco:1.52m*10m(5*32.8ft)
- Hatch:1.52m*13m(5*42.6ft)
- Convertible:1.52*13M(5*42.6ft)
- Coupe:1.52*15M(5*49.2ft)
- Sedan:1.52*18M(5*59ft)
- Small Van:1.52*18M(5*59ft)
- Truck Cab:1.52*18M(5*59ft)
- Small SUV:1.52*20M(5*65.6ft)
- MPV:1.52*23M(5*75.4ft)
- Pickck Truck:1.52*23M(5*75.4ft)
- Large SUV/Sedan:1.52*23M(5*75.4ft)
-
Large Van:1.52*25M(5*82ft)
- To keep your project running smoothly,
- We recommend leaving an extra 6-9 feet (2-3 meters)
- When measuring in case you need extra length during the film process.
- This avoids unnecessary delays or expenses due to insufficient materials.
Metallic Midnight Purple PP...
1.52*3m(5*9.8ft) / Midnight PurpleGet notified when this item is back in stock
Frequently asked questions
How long does Metallic Midnight Purple PPF last?
It carries an 8-year warranty and typically lasts 7 to 10 years on the car with normal care. The cashew topcoat and 95 to 98 percent UV block keep the purple and the metallic flake looking fresh for years, not months.
What is the difference between this color PPF and a vinyl wrap?
A vinyl wrap only adds color. This Metallic Midnight Purple film adds the same custom color and protects your paint underneath. The 7.5mil TPU layer absorbs rock chips, scratches, and road grime, so vinyl decorates while this does both jobs at once.
Does the metallic finish really self-heal?
Yes. The self-healing topcoat lets light swirls and fine scratches vanish with heat from the sun or warm water. The metallic flake sits under that topcoat, so the sparkle stays even and consistent as the surface heals.
Will the purple color fade over time?
The film blocks 95 to 98 percent of UV, which is what causes color and metallic finishes to dull. Midnight Purple is built to hold its deep tone and shift through the full 8-year warranty window with regular washing.
Does this film come off cleanly later?
Yes. When you are ready for a change, the TPU film removes cleanly and leaves the factory paint as you left it. Because it shielded the paint the whole time, the surface underneath stays in great shape.
How much film do I need for my car?
The roll is 1.52m wide and comes in 3m, 6m, 9m, and 15m lengths. A motorcycle or accent panels need less, a full sedan usually runs 15m or more, and a larger SUV or truck may need extra. Measure your panels or message us with your vehicle and we will help you size it.
Can I install Metallic Midnight Purple PPF myself?
Yes, this is a wet install, which gives you time to slide the film into place before it sets. Confident DIYers can wrap smaller panels at home. For a full car with the metallic finish lined up across every panel, many people choose a pro installer for the cleanest result.
Will the metallic look the same on every panel?
Lay the film with the flake running the same direction on each panel so the color stays even across the body. Working from one continuous roll per side helps the purple and sparkle match from fender to fender in changing light.
-
Free Shipping
-
Secure payment
-
Contact our experts
-
Free Returns


