1 / 1

Color Shift Soft Light Pink PPF | Self-Healing TPU Film
$260.00 USD
Size: 1.52*3m(5*9.8ft)
Color: Pink
Decal installation method: Wet apply

🎉 Free Shipping! Ready to ship

Soft Light Pink PPF | Self-Healing TPU Color Film
$260.00 USD
1.52*3m(5*9.8ft) / Pink / Wet apply
View details

Soft Light Pink is a gentle pastel that reads clean and calm in daylight and warms up under low sun. It is not loud and it is not flat. It gives your car a soft, fresh pink tone with a smooth even spread of color across every panel, so the finish looks finished rather than sprayed on.

This is real paint protection film, not vinyl. The same sheet that lays down the pink color also takes the rock chips, bug splatter, wash swirls, and road grime that would normally land on your factory paint. You get a new color and a physical shield in one layer, and the paint underneath stays exactly as it left the showroom.

Side by side comparison showing Soft Light Pink color PPF protecting the paint versus thinner decorative vinyl that only adds color

Key features

  • Self-healing topcoat: minor scratches and swirl marks fade out with heat from the sun or a heat gun.
  • Hydrophobic surface: water and dirt bead off instead of sticking, so the film stays cleaner for longer.
  • Acid rain and oxidation resistant: holds up against acid rain, oxidation and yellowing over years of daily driving.
  • Stain and penetration resistant: bird droppings, tree sap and grease do not soak into the film.
  • Flexible and tear resistant: high elongation and tensile strength let it stretch over curves without cracking.
  • Mirror-gloss finish: the glass-crystal top layer boosts paint depth and gloss by up to 40 percent and smooths out orange peel.
  • Removable adhesive: peels off cleanly with heat, with no glue residue left behind.
  • Bubble-free install: designed to lay flat without bubbling, warping or lifting at the edges.

The Wrapteck 3-layer TPU structure

Cutaway of the 3 layer 7.5mil TPU structure of Soft Light Pink color PPF showing topcoat, pigmented film, and adhesive

Specifications

Material TPU (thermoplastic polyurethane)
Thickness 7.5mil (330 ± 10µm)
Structure 3 layers
Raw material Lubrizol TPU resin
Adhesive Ashland acrylic adhesive
Topcoat Cashew-based coating
Application Wet install
Roll width 1.52m (5ft)
Roll lengths 3m, 6m, 9m and 15m
Warranty 2 years
Expected service life Up to 8 years

Lab test report

Performance level Premium Material

TPU—Thermoplastic Polyurethane Elastomer
Temperature resistance -40°c to +120°c Surface Type Anti-scratch TPU PPF Car Surface Protection Film
Film thickness (with glue) 140micron Release paper 140g/m2, Silicone coated with air channels
Adhesive thickness 30μm

 

Adhesive

 Henkel solvent-based Acrylic-based, repositionable, slidable
Adhesive type Pressure-sensitive Texture Effect Anti-scratch  Color TPU PPF Car Surface Protection Film
Adhesive power 18N/25mm Adhesive features Air-Release, Permanent, Removable
Heat temperature More than +120°c Tensile strength Along: min. 19Mpa, Across: min 19Mpa
Application method Dry & Wet Installation Application surface Compound curves, Concave surfaces, Corrugations, Flat, Simple curves
Removability Removable with heat Elongation Along: min. 130%, Across: min. 150%
Application temperature +8°C minimum (air and substrate) Application Cars & Vans, Trucks, Watercraft, Laptop, Cell phones, Wall, Furniture etc.
Expected Durability 8 years Features Stretchable, Removable, UV proof, Weather proof, Water proof, Resistant to solvents, Easy cleaning, Easy maintenance, Stylish, can stick any where

 

Maybe you want to know

PPF, TPU, and TPH: What Each One Does and Which One Your Car Needs

Does PPF Yellow? What Causes It and How to Keep Film Clear

Vinyl Wrap vs PPF: Which One Your Car Needs, and When

PPF vs Vinyl Wrap: Cost, Protection and Which to Choose

New to wrapping?

If this is your first film, start with our guide on how to wrap a car. This is a wet-install film, so you can do panels and accents at home, and a professional installer is the safest route for a full-car wrap.
Color pattern Pink
Translation missing: en.metafields.shopify.decal-installation-method Wet apply, Dry apply
Decoration material Vinyl, TPU
Vehicle application area Exterior, Vinyl
Vehicle decor features Scratch resistant, UV resistant, Waterproof, Heat resistant, Easy to apply, Self Healing, Sand Proof, Removable, Stretchable
Vehicle type Car, Golf cart, Recreational vehicle, Watercraft, Van, Truck, SUV, Motorcycle, Mirco, Hatch, Convertible, Coupe, Sedan, Pickck Truck
  • Soft Light Pink PPF | Self-Healing TPU Color Film
  • Soft Light Pink PPF | Self-Healing TPU Color Film
  • Soft Light Pink PPF | Self-Healing TPU Color Film
  • Soft Light Pink PPF | Self-Healing TPU Color Film
  • Soft Light Pink PPF | Self-Healing TPU Color Film
  • Soft Light Pink PPF | Self-Healing TPU Color Film
1 / 1

Frequently asked questions

How long does Soft Light Pink PPF last on my car?

It is backed by an 8-year warranty. The 7.5mil TPU film is built to stay on the car through daily driving, weather, and regular washing for years, not a season. The cashew topcoat and the UV block help the soft pink hold its tone the whole time.
What is the difference between this and a pink vinyl wrap?

A pink vinyl wrap only decorates. It adds color and nothing else. Soft Light Pink is paint protection film, so it adds the same pastel pink color and also takes the chips, scratches, and grime that would otherwise hit your paint. One layer colors the car and shields it at the same time.
Does Soft Light Pink PPF self-heal?

Yes. The cashew topcoat is self-healing, so light swirl marks and fine scratches in the surface close up on their own. A little warmth from the sun or a bucket of warm water pulls the topcoat back smooth and keeps the soft pink looking clean.
Will the pink color fade in the sun?

The film blocks 95 to 98 percent of UV, which is what makes color fade. Pastels like this rely on that UV block to hold their tone, so Soft Light Pink stays soft and true for years instead of washing out or going dull.
Can I remove it later without hurting my paint?

Yes. The Ashland adhesive is made to hold firm while it is on the car and then release cleanly when you are ready to take it off. Removed properly, it lifts away without tearing up or staining the factory paint underneath, so you can go back to stock or change color.
How much film do I need for my car?

The roll is 1.52m wide and comes in 3, 6, 9, and 15m lengths. A bike, spoiler, or mirror caps take a short 3m piece. A full small car usually runs 15m or more. Measure your panels and add a margin for trimming, and message us if you want help sizing it.
Can I install Soft Light Pink PPF myself?

Yes, it is a wet install, which gives you time to slide the film into place and work bubbles out before it sets. A patient DIYer can do flat and gentle panels at home with slip solution, a squeegee, and a heat source. Deep curves and full body jobs are easier with an extra set of hands or a pro.
Is Soft Light Pink glossy or matte?

It carries a smooth gloss finish that lets the pastel pink read clear and bright. The self-healing topcoat sits over the color, so you get shine and protection in the same surface.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns