Metallic Soul Red PPF | Self-Healing TPU Color Film

Regular price $260.00 USD
Size: 1.52*3m(5*9.8ft)
Color: Soul Red

🎉 Free Shipping! Ready to ship

Metallic Soul Red PPF | Self-Healing TPU Color Film
$260.00 USD
1.52*3m(5*9.8ft) / Soul Red

Metallic Soul Red has the kind of depth that flat reds never reach. Fine metallic flake catches the light so the panel shifts from a deep cherry in shade to a bright, alive red under direct sun. It is rich and warm without going pink, the sort of red that makes people look twice in a parking lot.

This is not vinyl. It is real paint protection film, so the same layer that gives you that metallic red also shields your factory paint from rock chips, road grit, bug acid, and bird droppings. You color the car and protect it in one step, and the paint underneath stays sealed and untouched.

Side by side comparison of Metallic Soul Red color PPF versus standard vinyl wrap

Key features

  • Self-healing topcoat: minor scratches and swirl marks fade out with heat from the sun or a heat gun.
  • Hydrophobic surface: water and dirt bead off instead of sticking, so the film stays cleaner for longer.
  • Acid rain and oxidation resistant: holds up against acid rain, oxidation and yellowing over years of daily driving.
  • Stain and penetration resistant: bird droppings, tree sap and grease do not soak into the film.
  • Flexible and tear resistant: high elongation and tensile strength let it stretch over curves without cracking.
  • Mirror-gloss finish: the glass-crystal top layer boosts paint depth and gloss by up to 40 percent and smooths out orange peel.
  • Removable adhesive: peels off cleanly with heat, with no glue residue left behind.
  • Bubble-free install: designed to lay flat without bubbling, warping or lifting at the edges.

The Wrapteck 3-layer TPU structure

Diagram of the 3-layer TPU structure of Metallic Soul Red paint protection film

Specifications

Material TPU (thermoplastic polyurethane)
Thickness 7.5mil (330 ± 10µm)
Structure 3 layers
Raw material Lubrizol TPU resin
Adhesive Ashland acrylic adhesive
Topcoat Cashew-based coating
Application Wet install
Roll width 1.52m (5ft)
Roll lengths 3m, 6m, 9m and 15m
Warranty 8 years

Lab test report

Test Result Method
Thickness 330 ± 10µm Mitutoyo thickness meter
Elongation at break 100N ASTM D624-2000
Puncture resistance >15N GB/T 10004
Tensile strength 25MPa ASTM D638-2014
Finished film elongation >300% ASTM D882
Max operating temperature 100°C to 120°C GB/T 7141-2008
Anti-yellowing B value <5 GB/T 16422.3-2014, QUV 5000 hours
Adhesive hold strength >2200g GB/T 4851
UV resistance 95% to 98% blocked GB/T 2680
Gloss level 95GU 3NH gloss meter, 60 degree

New to wrapping?

If this is your first film, start with our guide on how to wrap a car. This is a wet-install film, so you can do panels and accents at home, and a professional installer is the safest route for a full-car wrap.

Product specifications table
Specification name Specification Value
Color pattern Red
Decoration material Vinyl, TPU
Vehicle application area Vinyl, Exterior
Vehicle decor features Scratch resistant, UV resistant, Waterproof, Heat resistant, Easy to apply, Self Healing, Sand Proof, Removable, Stretchable
Vehicle type Car, Recreational vehicle, Watercraft, Van, Truck, SUV, Motorcycle, Golf cart, Mirco, Hatch, Convertible, Coupe, Sedan, Pickck Truck

Frequently asked questions

How long does Metallic Soul Red PPF last on a car?

With normal use and basic care you can expect 7 to 10 years of service, and it carries an 8-year warranty. The cashew topcoat and TPU base are built to hold that metallic red without cracking or peeling over time.

What is the difference between this colored PPF and a vinyl wrap?

Vinyl only decorates. It changes the color and stops there. Metallic Soul Red is paint protection film, so it gives you the metallic red finish and also takes the hits from rocks, grit, and bug acid that would otherwise chip your paint. One film does both jobs.

Does Metallic Soul Red PPF really self-heal?

Yes. The topcoat is self-healing, so light swirl marks and fine scratches from washing close up on their own. Warmth from the sun or a little hot water speeds it along, and the metallic red goes back to looking even and clean.

Will the red color fade in the sun?

The film blocks 95 to 98 percent of UV, which is what causes red tones to dull and shift over time. That UV shield keeps Metallic Soul Red deep and true for years instead of washing out into a tired pink.

Does this film come off cleanly later?

Yes. When you want a change or you are selling the car, Metallic Soul Red can be removed without damaging the factory paint underneath. The paint comes out sealed and protected, just as it went in.

How much film do I need to wrap my car?

The roll is 1.52m wide and comes in 3m, 6m, 9m, and 15m lengths. Smaller jobs like a hood, roof, or single panel work with the shorter rolls, and a full vehicle wrap may take more than one roll depending on its size. Measure your panels first, then add a little extra for trimming and wrap-around edges.

Can I install Metallic Soul Red PPF myself?

Plenty of DIYers do. It is a wet install, so you lay it down with slip solution and squeegee out the water, which gives you room to reposition before it sets. Large single panels like a hood are very doable at home. A full body wrap with tight curves is easier with a second set of hands or a pro.

Is the metallic finish glossy or matte?

Metallic Soul Red is a glossy finish with metallic flake in it, so it reads as a wet, deep red with sparkle in the light rather than a flat tone. The self-healing topcoat keeps that gloss looking fresh after washes.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns