Gold gives your car a warm metallic shine that catches the light and turns heads in any parking lot. It reads as deep and luxurious in shade, then lights up bright and golden in full sun. This is not a sticker on top of your paint. It is real paint protection film with color built in, so the same layer that makes your car look custom is the layer taking the rock chips and swirl marks for you.

Underneath the gold finish sits a 7.5 mil (330um) TPU film built from three layers, with a self-healing cashew topcoat that erases light scratches on its own with a little heat. You get a fresh new color and a shield over your factory paint at the same time. When you are ready for a change, it comes off clean and leaves the paint it was guarding in the same shape it started.

Key features

• Self-healing topcoat: minor scratches and swirl marks fade out with heat from the sun or a heat gun.
• Hydrophobic surface: water and dirt bead off instead of sticking, so the film stays cleaner for longer.
• Acid rain and oxidation resistant: holds up against acid rain, oxidation and yellowing over years of daily driving.
• Stain and penetration resistant: bird droppings, tree sap and grease do not soak into the film.
• Flexible and tear resistant: high elongation and tensile strength let it stretch over curves without cracking.
• Mirror-gloss finish: the glass-crystal top layer boosts paint depth and gloss by up to 40 percent and smooths out orange peel.
• Removable adhesive: peels off cleanly with heat, with no glue residue left behind.
• Bubble-free install: designed to lay flat without bubbling, warping or lifting at the edges.

The Wrapteck 3-layer TPU structure

Specifications

Lab test report

New to wrapping?

If this is your first film, start with our guide on how to wrap a car. This is a wet-install film, so you can do panels and accents at home, and a professional installer is the safest route for a full-car wrap.