1 / 1

Abudhabi Blue Gloss Vinyl Car Wrap | Polymeric Film
$150.00 USD
Size: 1.52*6m(5*20ft)
Color: Abudhabi Blue

🎉 Free Shipping! Ready to ship

Abudhabi Blue Gloss Vinyl Car Wrap | Polymeric Film
$150.00 USD
1.52*6m(5*20ft) / Abudhabi Blue
View details

Abudhabi Blue lays down a deep, saturated blue with a wet glass shine, the kind of color that looks like it came straight from a custom paint booth. Under sun it reads bright and rich, and as the light drops it settles into a darker, moodier tone. It suits anyone who wants a bold factory-style blue without touching the original paint.

This is a color change wrap, not just a coat of style. The polymeric gloss film sits over your panels and takes the daily hits of dust, light grit, washing, and UV so the paint underneath stays protected. When you want a different look later, it comes off and your factory finish is still there.

Car panel in Abudhabi Blue gloss vinyl wrap next to a respray sample, showing the wrap matches a painted blue finish while staying reversible.

Key features

  • Painted-on gloss finish: a mirror-gloss topcoat gives the deep wet-paint shine without the cost of a respray.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the gloss topcoat holds up to sun and rain across a -30 to +140 degree range.
  • Easy to keep clean: wipes down and washes like paint, with no special care needed.

How a wrapteck gloss wrap is built

Layer diagram of Abudhabi Blue gloss vinyl wrap showing the PVC color face, air-release adhesive, and PET liner.

Specifications

Material Polymeric PVC vinyl
Finish Gloss
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Abudhabi Blue Gloss Vinyl Car Wrap | Polymeric Film
  • Abudhabi Blue Gloss Vinyl Car Wrap | Polymeric Film
  • Abudhabi Blue Gloss Vinyl Car Wrap | Polymeric Film
  • Abudhabi Blue Gloss Vinyl Car Wrap | Polymeric Film
1 / 1

Frequently asked questions

How long does an Abudhabi Blue gloss wrap last?

With normal care this blue holds its gloss and color for years. Heat, harsh sun, and rough washing are what wear any wrap down over time, so a car that lives in a garage will keep that deep shine longer than one parked outside all day. Wash it gently and it stays looking fresh.
Will the wrap damage my paint or actually protect it?

It protects it. The Abudhabi Blue film sits on top of your factory paint and takes the daily dust, light grit, and UV instead of the paint itself. The Henkel air-release adhesive is made to bond well and then release cleanly, so factory paint in good condition stays safe underneath.
Why pick a gloss wrap over a respray?

A respray in this kind of deep blue is expensive, takes days, and is permanent. The Abudhabi Blue wrap costs less, goes on faster, and keeps your original paint intact underneath. If you ever want to switch colors or sell the car, you peel it off instead of paying to repaint.
How much film do I need for my car?

The rolls are 1.52m (5ft) wide and come in 6m, 18m, and 23m lengths. A small part like a roof or hood is fine with 6m. A full compact car usually lands around 18m, and a larger car or SUV is safer with 23m. Add a little extra for mistakes and for matching the blue across panels.
Can I install Abudhabi Blue myself?

Yes. The air-release adhesive has channels that let trapped air escape, so you get far fewer bubbles than with cheap film. You can do a dry or wet install. Flat panels are very DIY friendly. Deep curves and bumpers take patience and a heat gun, so take your time on those.
Does the wrap come off cleanly later?

It does. When you are ready for a change, warm the Abudhabi Blue film with a heat gun and pull it back slowly at a low angle. On factory paint in good shape it lifts off without leaving the color behind. Any light adhesive trace wipes away with adhesive remover.
How do I wash and care for it?

Hand wash with a mild car soap and a soft mitt, then rinse and dry. Skip harsh brushes and stay clear of high-pressure jets aimed straight at the edges. Clean off bugs, fuel splashes, and bird mess quickly so they do not sit on the gloss. That simple routine keeps the blue deep and shiny.
Will the gloss fade over time?

The film has UV resistance built in, so Abudhabi Blue holds its tone and shine well through normal use. Constant direct sun and heat will dull any finish eventually. Parking in shade or a garage and washing gently are the easiest ways to keep that rich glass-like blue going strong.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns