Cement Grey Gloss Car Wrap | Polymeric Vinyl

Regular price $150.00 USD
Size: 1.52*6m(5*20ft)
Color: Cement Dark Grey

🎉 Free Shipping! Ready to ship

Cement Grey Gloss Car Wrap | Polymeric Vinyl
$150.00 USD
1.52*6m(5*20ft) / Cement Dark Grey

Cement Grey reads like polished concrete on the move. It is a cool, muted grey with a clean wet shine, the kind of tone that looks modern in the city and serious in the driveway. Under sun it stays calm and neutral, with a soft mirror in the gloss that picks up the shapes around your panels instead of shouting for attention.

This is a color change wrap, not a coat of paint. The gloss film lays over your factory finish and wears the daily stuff for you, parking lot dust, light rubbing, sun, and washing. Your real paint stays sealed and untouched while Cement Grey does the showing off, and when you want a fresh look later the film comes back off.

Side by side of a car finished in Cement Grey gloss vinyl wrap next to the same car after a respray, showing the wrap as the cheaper reversible option

Key features

  • Painted-on gloss finish: a mirror-gloss topcoat gives the deep wet-paint shine without the cost of a respray.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the gloss topcoat holds up to sun and rain across a -30 to +140 degree range.
  • Easy to keep clean: wipes down and washes like paint, with no special care needed.

How a wrapteck gloss wrap is built

Layer diagram of Cement Grey gloss vinyl wrap showing the PVC face, solvent acrylic air-release adhesive, and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Gloss
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

How long does a Cement Grey gloss wrap last?

With normal care it holds its look for years. The cool grey tone and the gloss stay strong when you keep the car clean and out of harsh sun. A wrap that lives in a garage will always go further than one parked outside all day, every day.

Will this wrap damage my paint or protect it?

It protects it. Cement Grey sits on top of your factory paint and takes the daily wear, the dust, the light scuffs, the sun. Your original finish stays sealed underneath. As long as the paint was sound and clean before the install, the wrap is doing your paint a favor, not harming it.

Cement Grey gloss wrap or a full respray, which makes more sense?

A respray in this kind of cool grey costs a lot more, ties the car up for days, and changes the paint for good. Wrapping in Cement Grey is cheaper, much faster, and reversible. You also keep your factory paint protected, and if you ever want a different color you just peel and switch.

How much film do I need for my car?

The film is 1.52m wide (about 5ft) and comes in 6m, 18m, and 23m lengths. A small car or a big set of accent panels usually works from the shorter rolls, a regular sedan or coupe tends to need the 18m, and a large SUV, truck, or a full job with extra for mistakes is safer on the 23m. When you are between sizes, size up so you are not short mid panel.

Can I install Cement Grey myself?

Yes, a patient DIY installer can. The Henkel solvent based acrylic adhesive is air-release, so the channels let trapped air escape and you can lift and reset the film while you work instead of fighting instant bonds. You can go dry or wet. Take your time on the curves and bumpers, and a clean prep makes the whole thing easier.

Does the wrap come off cleanly later?

On sound factory paint, yes. With a little heat the Cement Grey film lifts away and the adhesive is made to release rather than tear. That clean removal is the whole point of a wrap. You change the look, then take it back to stock or wrap a new color without redoing your paint.

How do I wash and care for it?

Treat it like good paint. Hand wash with a soft mitt and a gentle car soap, rinse well, and dry with a clean microfiber so you avoid spots. Skip harsh brushes and strong solvents. Get bird droppings and bug splatter off quickly, and the gloss on this grey stays sharp.

Will the gloss fade over time?

Cement Grey is built to hold its tone and shine through normal use, with a heat range from -30 to +140 C so it handles cold mornings and hot days. Like anything that lives in the sun, kind treatment keeps it looking newest. Regular washing and some shade go a long way toward keeping the grey crisp.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns