Agate Green Metallic Car Wrap | Vinyl Film

Regular price $200.00 USD
Size: 1.52*6m(5*20ft)
Color: Agate Green

💪 Hurry up! Only 9 left

Agate Green Metallic Car Wrap | Vinyl Film
$200.00 USD
1.52*6m(5*20ft) / Agate Green

Agate Green is a deep jeweled green with fine metal flake worked right into the color layer. Park it in the shade and it reads rich and almost forest dark. Roll it into the sun and the flake wakes up, throwing a glossy sparkle that shifts as you walk around the car. It is the kind of green that looks expensive without trying too hard, equal parts stealthy and showy depending on the light.

This is a full color change wrap, so it covers your factory paint completely while it sits on top as a shield against the daily stuff that wears paint down. Sun, light grit, fuel splashes, washing, all of it hits the film instead of your clear coat. When you are ready for a new look you peel it off and your original paint is still there underneath.

Agate Green metallic gloss vinyl wrap shown next to a costly custom metallic respray for comparison

Key features

  • Deep metallic sparkle: fine metal flake runs through the color layer, so the finish reads rich in the shade and glints with sparkle in direct sun.
  • Glossy depth: a clear topcoat over the flake gives a wet, glossy shine with real depth, the same look factory metallic paint gets from flake in the basecoat.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.

How a wrapteck metallic wrap works

Cutaway showing how the Agate Green metallic finish is built, with metal flake in the gloss color layer over the adhesive and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic (fine metal flake)
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

What does the metallic flake actually do on this green?

The flake is fine metal mixed into the Agate Green color layer. It catches and scatters light, so the wrap looks deep and quiet in shade and then sparkles with a glossy shimmer in direct sun. That sun to shade shift is the whole point of a metallic finish and it is what sets it apart from a flat solid green.

Does Agate Green have a rough texture or is it smooth?

It is smooth to the touch. The flake lives inside the color layer under a glossy top surface, so you see the sparkle but you do not feel grain. Run your hand across it and it feels like a slick painted panel, not sandpaper.

Will wrapping my car damage the paint underneath?

No. This wrap protects your factory paint rather than harming it. The Agate Green film sits over your clear coat and takes the daily wear instead of the paint. As long as your existing paint is healthy and well stuck, the wrap shields it the entire time it is on.

Why pick an Agate Green wrap over a custom metallic respray?

A real metallic flake respray costs a lot, takes your car off the road for a while, and is hard to match or fix if it ever gets scratched. This wrap gives you the same deep flaked green look for far less, goes on faster, keeps your original paint safe under it, and peels off cleanly when you want a change. A respray is permanent. This is not.

How do I wash and care for an Agate Green metallic wrap?

Treat it gently. Hand wash with a soft mitt and a pH neutral car soap, rinse well, and pat dry with a clean microfiber towel. Skip harsh brushes and strong solvents. Clear bug splatter and fuel spills off quickly so they do not sit on the gloss. Keeping it garage parked out of constant sun helps the finish hold its sparkle for longer.

Can I install this myself with the air-release adhesive?

Yes, the air-release adhesive is built for DIY. Tiny channels in the glue let trapped air escape as you squeegee, so you can chase out bubbles and reposition the film while you work. Patient first timers wrap flat panels like a hood or roof on their own. Tight curves and mirrors take more practice, so start on the easy panels and build up. You can install dry or wet.

Does Agate Green peel off cleanly later?

When you are ready for a different look, warm the film with a heat gun and pull it back slowly at a low angle. Done with gentle heat the Agate Green wrap comes away cleanly and leaves your factory paint as it was. Older wraps that baked in the sun for a long time can need a little extra heat and patience.

How much film do I need for my car?

It depends on the size and shape of your vehicle. A compact car uses less than a large SUV or truck, and complex curves eat extra film. We offer two roll lengths, 30ft (9m) and 59ft (18m), so you can buy what suits a partial accent or a full wrap. When in doubt size up, since having a little spare beats running short mid panel.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns