1 / 1

Cherry Dark Red Metallic Car Wrap | Gloss Vinyl
$200.00 USD
Color: Cherry Dark Red
Size: 1.52*6m(5*20ft)

💪 Hurry up! Only 8 left

Cherry Dark Red Metallic Car Wrap | Gloss Vinyl
$200.00 USD
Cherry Dark Red / 1.52*6m(5*20ft)
View details

Cherry Dark Red is a deep wine red with fine metal flake built into the color layer. In the shade it reads almost black cherry, dark and glossy with real depth. Roll into the sun and the flake wakes up, scattering tiny points of light across the panel so the red glows warm and alive. It is the kind of finish that looks one way in the driveway and a richer way once you start moving.

This is a color-change wrap, so it goes right over your factory paint. The vinyl shields the paint underneath from sun, light scratches, and the grime of daily driving, and it peels off later when you want a change. You get a custom deep-red metallic look without touching the paint that came with the car.

Cherry Dark Red metallic vinyl wrap next to a custom metallic respray, showing the wrap as the cheaper reversible choice

Key features

  • Deep metallic sparkle: fine metal flake runs through the color layer, so the finish reads rich in the shade and glints with sparkle in direct sun.
  • Glossy depth: a clear topcoat over the flake gives a wet, glossy shine with real depth, the same look factory metallic paint gets from flake in the basecoat.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.

How a wrapteck metallic wrap works

Cutaway of how the Cherry Dark Red metallic finish is built, with metal flake in the gloss color layer over adhesive and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic (fine metal flake)
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Cherry Dark Red Metallic Car Wrap | Gloss Vinyl
  • Cherry Dark Red Metallic Car Wrap | Gloss Vinyl
  • Cherry Dark Red Metallic Car Wrap | Gloss Vinyl
  • Cherry Dark Red Metallic Car Wrap | Gloss Vinyl
  • Cherry Dark Red Metallic Car Wrap | Gloss Vinyl
1 / 1

Frequently asked questions

What does the metallic flake actually do on Cherry Dark Red?

The flake is mixed into the color layer, so it catches and bounces light. In low light the red looks deep and almost black cherry. In direct sun the flake lights up and the red turns bright and lively. That shift between shade and sun is what gives a metallic wrap its character versus a flat solid color.
Does this wrap have a rough texture or is it smooth?

It is smooth to the touch. The metal flake sits inside the color layer under a glossy top, so you see the sparkle but you feel a clean, even gloss surface. Running your hand over a wrapped panel feels much like a painted one.
Will wrapping my car damage the paint?

No. A proper install protects the factory paint rather than harming it. The Cherry Dark Red film covers the original color and takes the daily wear, sun, and light scratches instead. As long as your paint is in sound condition and the wrap is removed correctly, the paint underneath stays in good shape.
How is a metallic wrap different from a metallic respray?

A real metallic-flake respray costs a lot, takes your car off the road for a long time, and is hard to color-match or repair if a panel gets damaged. This Cherry Dark Red wrap gives you a similar deep metallic look for far less, goes on faster, and comes off when you want to change it or sell the car. It also leaves your original paint untouched underneath.
How do I wash and care for a Cherry Dark Red wrap?

Hand wash with a mild soap and a soft mitt, then rinse and dry. Skip harsh solvents and aggressive automatic brushes. Clean off bird droppings, fuel splashes, and bug splatter quickly so they do not sit on the surface. A wrap kept in a garage out of constant sun will hold its gloss and flake longer. With good care it lasts for years.
Can I install this myself?

Yes, many DIY installers do. The Henkel solvent-based acrylic adhesive is air-release, so the channels let trapped air escape and help you slide and reposition the film as you work. You can install dry or wet. Take your time on curves and recesses, use heat to shape it, and the metallic flake reads consistent across the panel.
Does the wrap come off cleanly later?

Yes. When you want a change, the film is designed to be removable. Warm it gently and peel it back at a low angle, and it lifts away. Removing it cleanly is part of why a wrap is a friendlier choice than a respray when you want your factory paint back.
How much film do I need for my car?

It depends on the size and shape of your vehicle, plus extra for mirrors, recesses, and mistakes. This film comes in 30ft (9m) and 59ft (18m) roll lengths. A small car or a partial job can work from the shorter roll, while a full wrap on a sedan or SUV usually calls for the longer length. When in doubt, order a little extra so you are not short mid-install.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns