Ghost Midnight Red Diamond Car Wrap | Gloss Vinyl

Regular price $220.00 USD
Size: 1.52*6m(5*20ft)
Color: Ghost Midnight Red

🎉 Free Shipping! Ready to ship

Ghost Midnight Red Diamond Car Wrap | Gloss Vinyl
$220.00 USD
1.52*6m(5*20ft) / Ghost Midnight Red

Ghost Midnight Red is a deep, shifting red that carries thousands of diamond micro-flakes beneath its surface. In direct sunlight it blazes with sharp silver-red glitter. Under streetlights or garage lighting it settles into a darker, more mysterious crimson. No two viewing angles look the same, and that is exactly the point.

The wrap goes over your factory paint, shields it from daily road wear and UV fade, and peels off cleanly when you are ready for a new look. Getting a custom diamond-effect paint job would cost a serious amount of money and make resale complicated. This gloss vinyl gives you the same visual impact at a fraction of the price, and your original paint stays untouched underneath.

Ghost Midnight Red Diamond vinyl wrap on a car panel compared to a custom diamond-effect red paint job, showing the same shifting flake depth at a fraction of the cost

Key features

  • Diamond micro-flake formula — suspended flakes catch and reflect light from every angle, so the red shifts from deep crimson to a bright sparkling finish depending on your viewing position
  • Gloss finish — high-clarity top coat keeps the flake effect vivid and makes the film easy to wash with standard car-wash soap
  • Polymeric PVC face film, 3.7 to 4.1 mil thick — conforms smoothly around bumpers, mirrors, and door edges without tearing
  • Henkel solvent-based acrylic adhesive with air-release channels — lets you reposition during install and reduces bubble risk on large panels
  • Protects factory paint from UV exposure, light scratches, and everyday road grime without altering your vehicle permanently
  • Dry or wet installation supported — works with either method so installers can use their preferred technique

How wrapteck specialty wraps work

Cross-section diagram showing how Ghost Midnight Red Diamond wrap works: PET liner, Henkel air-release adhesive layer, PVC face film with embedded diamond micro-flakes, and gloss top coat

Specifications

Material Polymeric PVC vinyl
Finish Diamond micro-flake (gloss)
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

What does the diamond micro-flake effect actually look like on Ghost Midnight Red?

The base color is a deep, rich red. The diamond micro-flakes are suspended throughout the film and catch light differently depending on angle and lighting conditions. In direct sunlight you see sharp, bright flicker across the surface, almost like tiny mirrors embedded in the red. In shade or at night under artificial lighting the flakes tone down and the color reads as a darker, more intense crimson with subtle glitter depth. It is a much more dynamic finish than standard gloss red.

Will this wrap protect my paint?

Yes. The vinyl sits on top of your factory paint and takes the daily abuse in its place: UV rays, light scratches from car washes, dust and grime. It is a cosmetic vinyl wrap, not a protective vinyl film, so it is not designed to stop stone chips or deep impacts. But it does keep your original paint shielded and in better condition while the wrap is on.

How does this compare to getting a custom diamond-effect paint job?

A custom pearl or diamond paint effect from a body shop costs thousands of dollars and is permanent. If it chips or you want to change the look later, repainting the whole car is the only fix. Ghost Midnight Red Diamond wrap gives you the same shifting, flake-filled visual for a fraction of the price. It goes over your factory paint, protects it, and removes cleanly. You get the look without the commitment or the repair headache.

How do I wash and care for a gloss diamond vinyl wrap?

A gloss finish like this one is straightforward to maintain. Regular car-wash soap and water work fine. Rinse off dirt before wiping to avoid dragging grit across the surface. Avoid harsh degreasers or solvent-based cleaners near the edges. You can use a spray wax or ceramic coat designed for vinyl to keep the gloss and flake effect looking sharp for longer.

Can I install this myself?

Yes. The film supports both dry and wet installation, so you can use whichever method you are comfortable with. The Henkel air-release adhesive channels help with repositioning and bubble removal during the install. That said, large panels like hoods and roofs take practice. If you have not wrapped a full panel before, starting on a smaller section or watching a few installation guides before you begin is worth the time.

Will it remove cleanly without damaging my paint?

When removed correctly, yes. Warm the film gently with a heat gun or hot water to soften the adhesive, then peel slowly at a low angle. The adhesive is designed to release cleanly from automotive paint. Always avoid pulling quickly or at sharp angles, especially in cold temperatures, as that increases the chance of leaving residue.

How much film do I need for a full car wrap?

A standard sedan typically needs around 50 to 60 feet (roughly 15 to 18 meters) of a standard 60-inch wide roll. Larger vehicles like SUVs or trucks need more, usually 60 to 75 feet. If you are wrapping just a roof, hood, or individual panels you will need considerably less. When in doubt, order a little extra so you have material to practice with and cover any mistakes on complex curves.

Does the color shift change depending on the color of lighting?

It does, noticeably. Under warm incandescent or amber lighting the red in Ghost Midnight Red gets richer and the flakes take on a warmer gold-red glitter. Under cool white or LED lighting the flakes read as silver against the red base. That variability is part of what makes diamond micro-flake finishes stand out. The car looks different every time you see it in a new environment.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns