1 / 1

Fiery Red Metallic Car Wrap | Gloss Vinyl
$170.00 USD
Size: 1.52*6m(5*20ft)
Color: Soul Red

🎉 Free Shipping! Ready to ship

Fiery Red Metallic Car Wrap | Gloss Vinyl
$170.00 USD
1.52*6m(5*20ft) / Soul Red
View details

Fiery Red is a bright, vivid red with a gloss finish and real metal flake worked into the color layer. In shade it reads as a deep, clean red with an inner richness that a flat solid paint does not carry. In direct sun the flake wakes up and the panel sparks and shifts as the light moves, giving the car an energy that stops people mid-stride. It is bold, it is high-impact, and it earns a second look.

This is a color-change wrap, not paint. It lays a fresh metallic gloss red over your factory finish and takes the daily punishment of sun, dust and light scuffs so your factory paint stays sealed and untouched underneath. When you are ready for a change, it peels off and the original paint is still there. You get a show-quality metallic red for a fraction of a respray, and you keep the option to undo it.

Car panel in Fiery Red metallic gloss wrap beside a custom red metallic respray, showing the wrap as a fast reversible alternative

Key features

  • Fine metal flake: metal flake mixed into the color layer catches and scatters direct light for an alive, shifting sparkle.
  • High-gloss surface: the smooth, mirror-like face film gives a deep gloss finish that pops in photos and in person.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.

How a wrapteck metallic wrap works

Cutaway diagram of Fiery Red metallic gloss vinyl wrap showing the flake color layer, air-release adhesive, and PET liner over factory paint

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic, fine metal flake
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Fiery Red Metallic Car Wrap | Gloss Vinyl
  • Fiery Red Metallic Car Wrap | Gloss Vinyl
  • Fiery Red Metallic Car Wrap | Gloss Vinyl
  • Fiery Red Metallic Car Wrap | Gloss Vinyl
  • Fiery Red Metallic Car Wrap | Gloss Vinyl
1 / 1

Frequently asked questions

What does the metallic flake actually do on Fiery Red?

The flake is mixed into the color layer, so it catches and bounces light. In shade you get a deep, even red. In direct sun the tiny flakes light up and the panel sparkles and shifts as you walk around it. A plain solid red looks flat next to it.
Does the surface feel rough or gritty because of the flake?

No. The flake sits below a smooth gloss face film, so the surface feels slick and even like a clear coat. You see the sparkle but you do not feel any texture when you run your hand across it.
Will this wrap damage my paint, or does it protect it?

It protects it. The Fiery Red film covers your factory paint and takes the daily hits from sun, dust, road grime, and light scuffs instead of the paint. As long as your original paint is healthy and clean before install, the wrap shields it while it is on the car.
Why choose a metallic wrap over a custom metallic respray?

A real metallic-flake respray is expensive, slow, and hard to repair or match if a panel gets damaged. This Fiery Red wrap costs far less, goes on much faster, keeps your factory paint underneath, and peels off cleanly when you want a change. A respray is permanent and one mistake means redoing paint.
How do I wash and care for it?

Hand wash with a mild car shampoo and a soft mitt, then rinse and dry with a clean microfiber towel. Skip harsh solvents and stiff brushes. Keep it out of long, hard sun when you can. A wrap that lives in a garage will keep its gloss and sparkle looking fresh for years.
Can I install Fiery Red myself?

Yes, many DIY installers do. The solvent-based acrylic air-release adhesive lets trapped air escape through tiny channels, so you get fewer bubbles and can reposition as you go. You can install dry or wet. Take your time on curves and mirrors, and use gentle heat to help the film conform.
Does it remove cleanly later?

On healthy factory paint, yes. Warm the film with low heat and peel it back slowly at an angle. Any light adhesive left behind comes off with a proper adhesive remover. Your original paint stays underneath the whole time.
How much film do I need for my car?

It depends on your vehicle size. The film comes in 30ft (9m) and 59ft (18m) roll lengths. A small car or partial job like a roof or hood can use the shorter roll, while a full wrap on a sedan or larger vehicle usually needs the longer length plus a little extra for mistakes and complex panels.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns