1 / 1

Jasper Grey Metallic Car Wrap | Gloss Vinyl
$200.00 USD
Size: 1.52*6m(5*20ft)
Color: Jasper Grey

🎉 Free Shipping! Ready to ship

Jasper Grey Metallic Car Wrap | Gloss Vinyl
$200.00 USD
1.52*6m(5*20ft) / Jasper Grey
View details

Jasper Grey reads like a deep stone grey with real depth. The fine metal flake sits inside the color layer, so in soft shade the wrap looks calm and almost matte-smooth to the eye, then the second sunlight hits it the flake lights up and the whole panel sparkles with a cool silver shimmer. It is the kind of grey that looks expensive without shouting, equally at home on a daily driver or a weekend build.

This is a gloss metallic color-change wrap, not paint. It lays a fresh finish over your car while it shields the factory paint underneath from sun, light scratches, and daily wear. When you want a change later, it comes off and leaves the original paint where it started.

Side by side of a costly custom metallic respray and an affordable reversible Jasper Grey metallic vinyl wrap from Wrapteck.

Key features

  • Deep metallic sparkle: fine metal flake runs through the color layer, so the finish reads rich in the shade and glints with sparkle in direct sun.
  • Glossy depth: a clear topcoat over the flake gives a wet, glossy shine with real depth, the same look factory metallic paint gets from flake in the basecoat.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.

How a wrapteck metallic wrap works

Cutaway showing how a Jasper Grey gloss metallic wrap works, with metal flake in the color layer over the air-release adhesive and PET liner.

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic (fine metal flake)
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Jasper Grey Metallic Car Wrap | Gloss Vinyl
  • Jasper Grey Metallic Car Wrap | Gloss Vinyl
  • Jasper Grey Metallic Car Wrap | Gloss Vinyl
  • Jasper Grey Metallic Car Wrap | Gloss Vinyl
  • Jasper Grey Metallic Car Wrap | Gloss Vinyl
1 / 1

Frequently asked questions

What does the metallic flake actually do on Jasper Grey?

The flake is mixed into the color layer, not sprinkled on top. It catches and scatters light, so Jasper Grey shifts from a quiet deep grey in shade to a bright sparkling grey in direct sun. It adds depth and movement that a flat solid grey simply cannot give you.
Does the wrap feel rough or textured because of the flake?

No. The flake lives under a smooth gloss top layer, so the surface of Jasper Grey is slick and even to the touch. You see the sparkle but you feel a clean glossy finish, the same as any gloss wrap.
Will wrapping hurt my paint, or does it protect it?

A proper wrap protects. Jasper Grey covers your factory paint and takes the hits from sun, grime, and light surface scratches instead of the paint. Applied to sound original paint and removed with gentle heat, it lifts away cleanly and leaves the paint underneath in the shape it was.
How is this different from a real metallic respray?

A custom metallic-flake respray is costly, takes your car off the road for days, and is hard to repair or undo if you change your mind. Jasper Grey gives you that flaked metallic look for far less, goes on faster, peels off when you want, and keeps your real paint safe the whole time.
How do I wash and care for it?

Hand wash Jasper Grey with a soft mitt and a pH-neutral car shampoo, then dry with a clean microfiber towel. Skip harsh brushes and automated brush washes. Clear fuel spills and bird mess quickly. Parking in a garage out of constant sun keeps the gloss and the flake looking their best for years.
Can I install it myself?

Yes, plenty of DIYers do. The Henkel solvent-based acrylic adhesive is air-release, so the channels let trapped air escape and reduce bubbles as you squeegee. You can run a dry or wet install. A heat gun, a squeegee, and patience go a long way, and large or deeply curved panels are easier with a second pair of hands.
Does Jasper Grey remove cleanly later?

When it was applied to healthy factory paint, yes. Warm the vinyl with a heat gun and pull it back slowly at a low angle. It is a wrap, so it is meant to come off when you are ready for a new look, leaving your original paint behind.
How much film do I need for my car?

Roll length comes in 30ft (9m) and 59ft (18m) options. A small car or hatch usually needs roughly the 59ft size for a full wrap, while sedans and larger vehicles often need more, and the 30ft rolls are handy for roofs, hoods, mirrors, and accent pieces. Add extra for practice and for complex curves.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns