1 / 1

Liquid Ruby Red Metallic Car Wrap | Gloss Vinyl
$200.00 USD
Size: 1.52*6m(5*20ft)
颜色: Liquid Ruby Red

🎉 Free Shipping! Ready to ship

Liquid Ruby Red Metallic Car Wrap | Gloss Vinyl
$200.00 USD
1.52*6m(5*20ft) / Liquid Ruby Red
View details

Liquid Ruby Red reads like molten gem stone over your panels. In direct sun the fine metal flake in the color layer lights up and the red turns bright and lively, full of tiny sparkle that moves as you walk around the car. Pull it into a garage or under cloud cover and the same red sinks into a deep, jewel toned glow with a glossy mirror shine. It is the kind of color that looks expensive from across a parking lot and even better up close.

This is a color change wrap, so it does more than change the look. The film lays over your factory paint and takes the daily hits of dust, light scratches, sun and road grime instead of the paint underneath. When you are ready for a new color or want the original paint back, it comes off. You get a custom metallic finish now and a protected, original car later.

Liquid Ruby Red metallic vinyl wrap next to a costly metallic respray, showing the cheaper reversible wrap option

Key features

  • Deep metallic sparkle: fine metal flake runs through the color layer, so the finish reads rich in the shade and glints with sparkle in direct sun.
  • Glossy depth: a clear topcoat over the flake gives a wet, glossy shine with real depth, the same look factory metallic paint gets from flake in the basecoat.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.

How a wrapteck metallic wrap works

Cutaway of how the Liquid Ruby Red metallic wrap is built, with gloss face film, metal flake color layer, air-release adhesive and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic (fine metal flake)
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Liquid Ruby Red Metallic Car Wrap | Gloss Vinyl
  • Liquid Ruby Red Metallic Car Wrap | Gloss Vinyl
  • Liquid Ruby Red Metallic Car Wrap | Gloss Vinyl
  • Liquid Ruby Red Metallic Car Wrap | Gloss Vinyl
  • Liquid Ruby Red Metallic Car Wrap | Gloss Vinyl
1 / 1

Frequently asked questions

What does the metallic flake actually do on Liquid Ruby Red?

The fine metal flake sits inside the color layer and catches light. On Liquid Ruby Red it makes the red sparkle and shift as the angle changes, so the panel never looks flat. It is the same trick a factory metallic paint uses, just in a wrap you can remove later.
How different does it look in sun versus shade?

A lot. Under strong sun Liquid Ruby Red gets bright and full of glittering flake. In shade or indoors it deepens into a rich, dark jewel red with a glossy shine. Many owners like to view a sample in both light before committing, since this color really shows off its range.
Is the surface textured or smooth?

Smooth. The flake is sealed under the glossy face film, so you feel a flat glossy surface, not grit. The sparkle is visual only. That smooth top coat also makes it easier to wipe down and keep clean.
Will wrapping hurt my paint, or does it protect it?

On factory paint in good shape it protects more than it harms. The wrap takes the sun, light scratches and road grime instead of your clear coat. Removed correctly later it lifts cleanly. The one caution is old, flaking or aftermarket repaint, which can lift with the film.
Why choose this wrap over a real metallic respray?

A custom metallic flake respray costs far more, ties up your car for days and is hard to match if you ever need a repair. Liquid Ruby Red gives you a similar deep metallic look for much less, goes on faster, protects the paint under it and peels off when you want a change. A respray is permanent and a wrap is not.
How do I wash and care for it?

Hand wash with a mild car shampoo and a soft mitt, then dry with a clean microfiber towel. Skip harsh solvents and stiff brushes. Wipe off fuel, bird mess and bug splatter quickly so they do not sit on the gloss. Parking in a garage out of constant sun helps the finish last longer.
Can I install Liquid Ruby Red myself?

Yes, with patience. The Henkel air-release adhesive has channels that let trapped air escape, so bubbles are easy to push out and you get a little repositioning room. You can do a dry or wet install. Flat and gently curved panels are very DIY friendly. Deep recesses and mirrors take more practice and a heat gun.
Does it remove cleanly, and how much do I need?

With gentle heat and a slow pull it is made to come off cleanly on sound factory paint. For coverage, a full small car usually needs around 50 to 60 ft, a sedan more, and a large SUV or truck the most. Measure your panels and add extra for mistakes. We offer 30ft and 59ft roll lengths to mix and match.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns