Orange Metallic Car Wrap | Gloss Vinyl

Regular price $170.00 USD
Size: 1.52*6m(5*20ft)
Color: Orange

🎉 Free Shipping! Ready to ship

Orange Metallic Car Wrap | Gloss Vinyl
$170.00 USD
1.52*6m(5*20ft) / Orange

Gloss metallic orange is the kind of color that pulls every eye in a parking lot. In open sun the fine metal flake lights up and the orange reads bright and electric, with tiny sparkles dancing across every curve of the panel. Roll into shade or a covered garage and it calms into a deeper, richer orange with a wet gloss shine. It is one color that changes mood with the light, which is exactly why people fall for a metallic finish.

This is a color-change wrap, not paint. It lays a glossy flaked orange layer right over your existing panels and seals the factory paint underneath from sun, light scratches, road grime, and the small dings of daily driving. When you want a new look down the road, the film comes off and your original paint is still there waiting.

Side by side of a car in gloss metallic orange vinyl wrap next to the same car after a custom metallic orange respray

Key features

  • Deep metallic sparkle: fine metal flake runs through the color layer, so the finish reads rich in the shade and glints with sparkle in direct sun.
  • Glossy depth: a clear topcoat over the flake gives a wet, glossy shine with real depth, the same look factory metallic paint gets from flake in the basecoat.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.

How a wrapteck metallic wrap works

Cutaway showing how the gloss metallic orange wrap is built, with the flaked orange color layer, gloss face film, and air-release adhesive

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic (fine metal flake)
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

What does the metallic flake actually do on this orange?

The flake is fine metal mixed into the orange color layer. It catches and bounces light, so the wrap throws off little sparkles in the sun and looks like it has real depth instead of a flat painted-on orange. It is the difference between a plain orange and one that almost glows when the light hits it.

Does it look the same in sun and shade?

No, and that is the fun of it. Under bright sun the metallic orange goes vivid and the flake really pops with sparkle. In shade or indoors it settles into a deeper, glossier orange. Same panel, two moods, depending on where you park.

Is the surface textured or smooth?

It is smooth to the touch. The metallic look comes from flake suspended inside the color layer, not from any bumps on top. The gloss face film over it feels slick and even, just like a polished glossy paint finish.

Will wrapping hurt my paint or actually protect it?

It protects it. The vinyl sits over your factory paint and takes the daily hits instead, sun, light scratches, dirt, and small scuffs. As long as your paint is in good shape when it goes on, the wrap shields it and peels away clean later with no damage.

Why pick this wrap over a custom metallic orange respray?

A real metallic-flake respray costs a lot, takes your car off the road for a while, and is a pain to fix if you scratch it. This wrap gives you the same head-turning metallic orange for far less, goes on faster, guards the paint underneath, and comes off when you want a change. A respray is permanent. This is not.

How do I wash and care for it?

Hand wash with a mild car soap and a soft mitt, then rinse and dry with a microfiber towel. Skip harsh solvents and stiff brushes. Avoid parking under fresh tree sap or bird droppings for long, and wipe spills off quickly. Treated well it stays sharp for years, and a garage-kept car holds the gloss and color even longer.

Can I install this myself?

Yes, many DIY installers do. The Henkel solvent-based acrylic adhesive is air-release, so the tiny channels in the glue let you push out bubbles and reposition while you work. You can run a dry or wet install. Take your time on curves and use gentle heat to set it, and the gloss metallic orange lays down clean.

How much film do I need for my car?

It depends on your vehicle size and whether you are doing a full wrap or just a few panels like the hood or roof. We offer 30ft (9m) and 59ft (18m) roll lengths. A small car or partial job can work off the shorter roll, while a full wrap on a larger vehicle usually calls for the longer roll plus a little extra for mistakes.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns