Qianshan Green Metallic Car Wrap | Gloss Vinyl

Regular price $200.00 USD
Size: 1.52*6m(5*20ft)
Color: Qianshan Green

🎉 Free Shipping! Ready to ship

Qianshan Green Metallic Car Wrap | Gloss Vinyl
$200.00 USD
1.52*6m(5*20ft) / Qianshan Green

Qianshan Green is a deep, alive green that shifts with the light. In the shade it reads as a rich forest tone with quiet depth. Roll into the sun and the fine metal flake wakes up, scattering tiny points of light across the panel so the whole car looks like it has motion even when it is parked. The gloss layer adds a wet, mirror-like shine on top of all that sparkle.

This is a color-change wrap, so it does the real work too. The film lays a fresh metallic green over your existing color and acts as a shield for the factory paint underneath, taking the daily hits from dust, light scuffs, and sun while your original finish stays clean and protected beneath it.

Side by side of a car in Qianshan Green metallic vinyl wrap next to a custom metallic respray, showing the wrap as the cheaper reversible option.

Key features

  • Deep metallic sparkle: fine metal flake runs through the color layer, so the finish reads rich in the shade and glints with sparkle in direct sun.
  • Glossy depth: a clear topcoat over the flake gives a wet, glossy shine with real depth, the same look factory metallic paint gets from flake in the basecoat.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.

How a wrapteck metallic wrap works

Cutaway diagram of the Qianshan Green metallic wrap showing the glossy flake color layer, PVC face film, acrylic adhesive, and PET release liner over factory paint.

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic (fine metal flake)
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

What does the metallic flake actually do on Qianshan Green?

The flake is fine metal mixed into the color layer. It catches and bounces light, so Qianshan Green looks like a flat deep green in low light and then sparkles with little points of brightness once direct sun hits it. That sun-versus-shade shift is the whole point of a metallic wrap and it is what makes the green feel deep instead of plain.

Does the wrap feel rough or textured because of the flake?

No. The flake sits inside the gloss color layer, not on top of it, so the surface stays smooth and glossy to the touch. You see the sparkle but your hand only feels a slick, even finish like glass.

Will wrapping my car hurt the paint underneath?

Used correctly it does the opposite. The Qianshan Green film covers your factory paint and takes the daily wear like dust, light scuffs, and UV for it. Healthy original paint stays protected under the wrap, and when you remove the film later the paint is still there underneath.

Why pick a metallic wrap over a real metallic respray?

A custom metallic respray with real flake is expensive, slow, and very hard to repair or undo. This Qianshan Green wrap gives you a similar flake-and-gloss look for far less, goes on much faster, protects the paint you already have, and peels off later if you want a different color. A respray is permanent in a way a wrap is not.

How do I wash and care for it?

Treat it gently. Hand wash with a soft mitt and a pH-neutral car soap, rinse well, and dry with a clean microfiber towel. Skip harsh brushes and automatic car washes with stiff bristles. Avoid pressure washing seams up close. Cared for like this the green keeps its sparkle and the film lasts for years, and a garage-kept car will hold up even longer.

Can I install Qianshan Green myself?

Yes, this is a DIY-friendly film. The air-release adhesive lets you reposition the vinyl as you work and pushes trapped air out through tiny channels so you fight fewer bubbles. You can install it dry or wet. Take your time, use a heat source for the curves, and clean panels work best. Big single panels are the easiest first projects.

Does it come off cleanly later?

When the wrap has done its years and you are ready for a change, it is made to peel away. Warming the film with gentle heat as you pull helps it lift in clean sections and reduces leftover residue. Because it is a wrap and not paint, you are not committed to Qianshan Green forever.

How much film do I need for my car?

It depends on the size of your vehicle and how much you are covering. As a rough guide, a small car often needs around 50 to 55 feet for a full wrap, a sedan more, and a large SUV or truck the most. We offer 30ft and 59ft roll lengths, so measure your panels first and add extra for mistakes, curves, and overlap.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns