1 / 1

Royal Indigo Blue Metallic Car Wrap | Gloss Vinyl
$200.00 USD
Size: 1.52*6m(5*20ft)
Color: Royal Indigo Blue

🎉 Free Shipping! Ready to ship

Royal Indigo Blue Metallic Car Wrap | Gloss Vinyl
$200.00 USD
1.52*6m(5*20ft) / Royal Indigo Blue
View details

Royal Indigo Blue is a deep, regal blue with a glossy metallic shine. Fine metal flake sits inside the color layer, so the finish stays calm and rich in the shade and then lights up with a thousand tiny sparkles the moment direct sun hits it. As your car rolls past a streetlight or turns into open daylight, the blue shifts from inky and moody to bright and electric.

This is a full color change you can do at home, and it wraps right over your factory paint. While it gives your car that show-quality metallic blue, the film also takes the daily hits for you, shielding the paint underneath from light scratches, road grime, and sun fade. Peel it off later and the original paint is still there.

Side by side of a costly custom Royal Indigo Blue metallic respray versus an affordable reversible Royal Indigo Blue metallic vinyl wrap

Key features

  • Deep metallic sparkle: fine metal flake runs through the color layer, so the finish reads rich in the shade and glints with sparkle in direct sun.
  • Glossy depth: a clear topcoat over the flake gives a wet, glossy shine with real depth, the same look factory metallic paint gets from flake in the basecoat.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.

How a wrapteck metallic wrap works

Cutaway showing how the Royal Indigo Blue metallic gloss wrap works, with metal flake in the color layer over air-release adhesive and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic (fine metal flake)
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Royal Indigo Blue Metallic Car Wrap | Gloss Vinyl
  • Royal Indigo Blue Metallic Car Wrap | Gloss Vinyl
  • Royal Indigo Blue Metallic Car Wrap | Gloss Vinyl
  • Royal Indigo Blue Metallic Car Wrap | Gloss Vinyl
  • Royal Indigo Blue Metallic Car Wrap | Gloss Vinyl
  • Royal Indigo Blue Metallic Car Wrap | Gloss Vinyl
1 / 1

Frequently asked questions

What does the metallic flake actually do on Royal Indigo Blue?

The fine metal flake is mixed into the color layer of the film. It catches and bounces light, so the blue reads deep and saturated in shade and bursts into a fine sparkle under direct sun. It gives the wrap real depth instead of a flat, single-tone look.
Does this Royal Indigo Blue wrap have a rough texture or is it smooth?

It is smooth to the touch. The flake is sealed inside the color layer under a glossy top, so you see the sparkle but feel a slick, even surface. There is no grain or grit on the outside.
How does Royal Indigo Blue look in sun versus shade?

In shade or indoor light it settles into a deep, moody indigo blue. Roll into direct sunlight and the metal flake fires up, lifting the blue to a brighter, livelier tone with visible sparkle. The shift between the two is a big part of the appeal.
Will this wrap damage my paint or actually protect it?

A properly installed wrap protects your factory paint. It shields the surface from light scratches, road grime, bug splatter, and UV fade while it is on. When you remove it cleanly, the paint underneath is still in the same shape it was when you wrapped it.
Why choose a Royal Indigo Blue wrap over a metallic respray?

A real metallic-flake respray is expensive, takes your car off the road for days, and is hard to match or repair if it gets damaged. This wrap gets you the same deep metallic blue for far less, goes on faster, protects the original paint, and peels off when you want a change. A respray is permanent and costly to undo.
How do I wash and care for the Royal Indigo Blue finish?

Hand wash with a gentle car soap and a soft mitt, then rinse and dry with a microfiber towel. Skip harsh solvents and stiff brushes. Keeping it clean keeps the metallic gloss bright, and a garage-kept wrap will look good for years longer than one left in the sun and weather full time.
Can I install this myself with the air-release adhesive?

Yes. The Henkel solvent-based acrylic adhesive has air-release channels, so trapped bubbles push out as you squeegee instead of staying stuck under the film. You can do a dry or wet install. Take your time on curves with a little heat, and many DIY installers handle panels at home with basic tools.
Does Royal Indigo Blue remove cleanly, and how much film do I need?

With gentle heat the wrap lifts off cleanly and leaves your factory paint behind. For coverage, a full car usually needs the longer 59ft (18m) roll, while a single roof, hood, or accent panel often fits within the 30ft (9m) roll. Measure your panels first and add a little extra for trimming and mistakes.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns