1 / 1

Soul Red Metallic Car Wrap | Gloss Vinyl
$170.00 USD
Size: 1.52*6m(5*20ft)
Color: Soul Red

🎉 Free Shipping! Ready to ship

Soul Red Metallic Car Wrap | Gloss Vinyl
$170.00 USD
1.52*6m(5*20ft) / Soul Red
View details

Soul Red is a deep, rich red with fine metal flake worked right into the color layer. Park it in the shade and it reads almost like wet candy, dark and full. Roll it into direct sun and the flake wakes up, throwing little points of sparkle across every panel so the body looks like it has real depth instead of one flat tone. The gloss top adds a clean mirror shine that makes the red feel expensive from across the lot.

This is a color-change wrap, not paint. It lays a fresh Soul Red skin over your factory finish while the film underneath takes the daily hits of dust, light scratches, and washing. When you want a change later, it comes off and the original paint is still there. You get a head-turning metallic red without touching a spray gun.

Side by side of a Soul Red metallic gloss vinyl wrap versus a custom metallic respray, showing the wrap as the cheaper reversible option

Key features

  • Deep metallic sparkle: fine metal flake runs through the color layer, so the finish reads rich in the shade and glints with sparkle in direct sun.
  • Glossy depth: a clear topcoat over the flake gives a wet, glossy shine with real depth, the same look factory metallic paint gets from flake in the basecoat.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.

How a wrapteck metallic wrap works

Cutaway of how the Soul Red metallic gloss wrap is built, from gloss face film to the fine metal flake color layer, adhesive, and release liner

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic (fine metal flake)
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Soul Red Metallic Car Wrap | Gloss Vinyl
  • Soul Red Metallic Car Wrap | Gloss Vinyl
  • Soul Red Metallic Car Wrap | Gloss Vinyl
  • Soul Red Metallic Car Wrap | Gloss Vinyl
  • Soul Red Metallic Car Wrap | Gloss Vinyl
1 / 1

Frequently asked questions

What does the metal flake actually do on Soul Red?

The flake sits inside the color layer and catches light from different angles. In shade Soul Red looks like a deep solid red. In sun the flake lights up and scatters tiny sparkles across the panel, so the red shifts from rich and dark to bright and lively as you walk around the car.
Does this wrap feel rough or textured because of the flake?

No. The flake is suspended below the gloss top film, so the surface stays smooth to the touch. You feel a slick glossy finish, not grit. The sparkle is something you see, not something you feel.
Will wrapping my car hurt the paint underneath?

Used correctly, no. The Soul Red film actually covers your factory paint and shields it from sun, light scratches, and grime while it is on. As long as the original paint is healthy and well stuck down, the wrap protects it rather than harming it.
How is this different from getting a metallic red respray?

A real metallic-flake respray is costly, takes your car off the road for days, and is hard to color match if you ever need a repair. Soul Red gives you that flaked metallic look for far less, goes on faster, keeps your factory paint underneath, and peels off when you want a different look. A respray is permanent and a wrap is not.
How do I wash and care for a Soul Red metallic wrap?

Hand wash with a soft mitt and a pH neutral soap, then rinse and dry with a clean microfiber towel. Skip harsh brushes and strong solvents. Keep it out of long sun when you can, since a garage-kept wrap holds its gloss and color longer. With steady care it will look sharp for years.
Can I install Soul Red myself at home?

Yes. The solvent-based acrylic air-release adhesive has channels that let trapped air escape, so the film lays down with fewer bubbles and you can reposition while you work. You can install dry or wet. Beginners should start with flat panels like the hood or roof and work up to bumpers and mirrors.
Does the wrap come off cleanly later?

When you are ready for a change, warm the film with a heat source and pull it back slowly at a low angle. Done with patience on sound factory paint, it lifts away cleanly. Any light adhesive left behind wipes off with a proper adhesive remover.
How much Soul Red film do I need for my car?

It depends on the size and shape of your vehicle. A small hatch or sedan usually needs less, while a large SUV or truck needs more, plus extra for mirrors, door jambs, and mistakes. We offer 30ft (9m) and 59ft (18m) roll lengths so you can pick a single panel project or a full wrap with margin to spare.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns