1 / 1

Tourmalie Red Metallic Car Wrap | Gloss Vinyl
$200.00 USD
Size: 1.52*6m(5*20ft)
Color: Tourmalie Red

🎉 Free Shipping! Ready to ship

Tourmalie Red Metallic Car Wrap | Gloss Vinyl
$200.00 USD
1.52*6m(5*20ft) / Tourmalie Red
View details

Tourmalie Red reads like a deep jeweled red until the light hits it. In shade it settles into a rich, glossy crimson with quiet depth. Roll into direct sun and the fine metal flake wakes up, throwing tiny points of sparkle across every panel and giving the red a lit-from-within glow. It is the kind of finish that makes people walk around the car.

This is a full color-change wrap, so it lays over your factory paint and shields it from the daily stuff that dulls a finish: light scuffs, sun, road grime, and bird mess. When you want to go back to the original look, the film comes off and your paint is still there underneath. You get a custom metallic red without touching the paint you already paid for.

Tourmalie Red metallic gloss vinyl wrap compared to a costly custom metallic respray on a car

Key features

  • Deep metallic sparkle: fine metal flake runs through the color layer, so the finish reads rich in the shade and glints with sparkle in direct sun.
  • Glossy depth: a clear topcoat over the flake gives a wet, glossy shine with real depth, the same look factory metallic paint gets from flake in the basecoat.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.

How a wrapteck metallic wrap works

Cross-section showing how the Tourmalie Red metallic wrap layers gloss color, metal flake, and air-release adhesive

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic (fine metal flake)
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Tourmalie Red Metallic Car Wrap | Gloss Vinyl
  • Tourmalie Red Metallic Car Wrap | Gloss Vinyl
  • Tourmalie Red Metallic Car Wrap | Gloss Vinyl
  • Tourmalie Red Metallic Car Wrap | Gloss Vinyl
  • Tourmalie Red Metallic Car Wrap | Gloss Vinyl
  • Tourmalie Red Metallic Car Wrap | Gloss Vinyl
1 / 1

Frequently asked questions

What does the metal flake do in Tourmalie Red?

The flake is mixed into the color layer, so it catches and bounces light from inside the red. In shade you see a deep glossy crimson. In direct sun the flake lights up and the whole panel sparkles with fine points of shine. It is the same idea as a metallic factory paint, just achieved with film.
Does the surface feel rough or textured?

No. The flake sits inside the color layer, not on top, so the face of the film stays smooth and glossy to the touch. You get the sparkle of metallic paint with a clean, even surface that wipes down easily.
Will wrapping hurt my paint, or does it protect it?

A properly installed wrap protects the paint underneath. The Tourmalie Red film acts as a shield against sun, light scratches, and road grime, so the factory finish stays cleaner over time. When removed correctly the wrap lifts away and leaves your original paint intact.
How is this different from a custom metallic respray?

A real metallic-flake respray is expensive, takes your car off the road for a long time, and is hard to repair or undo if you change your mind. This wrap costs far less, goes on faster, is reversible, and keeps your factory paint sealed underneath. If a panel gets damaged you re-wrap that section instead of repainting the whole car.
How do I wash and care for the wrap?

Hand wash with a soft mitt and a pH-neutral car shampoo, then dry with a clean microfiber towel. Skip harsh solvents and avoid scrubbing with abrasive pads. Wash off bird droppings and bug splatter quickly so they do not sit on the surface. Garage-kept wraps and gentle washing keep the gloss and sparkle looking fresh for years.
Can I install Tourmalie Red myself?

Yes, DIY installers wrap with this film. The Henkel solvent-based acrylic adhesive is air-release, so trapped bubbles push out as you squeegee and you can reposition while you work. It supports both dry and wet install. Take your time on curves and edges, and post-heat with a heat gun to lock the film into place.
Does the wrap remove cleanly later?

When removed properly, usually with gentle heat to soften the adhesive, the film peels away and leaves your factory paint behind. That is the whole point of a color-change wrap: a custom metallic red now, and the option to return to stock or switch colors later.
How much film do I need for my car?

It depends on the size and shape of the vehicle. This wrap comes in 30ft (9m) and 59ft (18m) roll lengths. A small car or partial job can work with the shorter roll, while a full wrap on a larger vehicle usually needs the longer one plus extra for mistakes and complex curves. When in doubt, size up so you are not left short mid-install.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns