1 / 1

Yellow Metallic Car Wrap | Gloss Vinyl
$200.00 USD
Size: 1.52*6m(5*20ft)
Color: Yellow

🎉 Free Shipping! Ready to ship

Yellow Metallic Car Wrap | Gloss Vinyl
$200.00 USD
1.52*6m(5*20ft) / Yellow
View details

This is a bright gloss metallic yellow with fine metal flake worked into the color. In open sun the flake lights up and the yellow turns electric, almost like liquid candy moving across every panel as the car rolls. Park it in the shade and it calms into a deep, rich golden yellow with a smooth glassy shine, so the same wrap reads two different ways depending on the light.

You get the head-turning color of a custom metallic finish while your factory paint stays sealed underneath. The film hugs every curve, shields the original surface from daily grit and light scratches, and peels back off when you are ready for a change. Years of color with good care, and longer if the car lives in a garage.

Gloss metallic yellow vinyl wrap on a car next to a costly custom metallic yellow respray, showing the cheaper reversible wrap option

Key features

  • Deep metallic sparkle: fine metal flake runs through the color layer, so the finish reads rich in the shade and glints with sparkle in direct sun.
  • Glossy depth: a clear topcoat over the flake gives a wet, glossy shine with real depth, the same look factory metallic paint gets from flake in the basecoat.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.

How a wrapteck metallic wrap works

Diagram of how a gloss metallic yellow vinyl wrap is built, showing the flake color layer, glossy topcoat, air-release adhesive, and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic with fine metal flake
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Yellow Metallic Car Wrap | Gloss Vinyl
  • Yellow Metallic Car Wrap | Gloss Vinyl
  • Yellow Metallic Car Wrap | Gloss Vinyl
  • Yellow Metallic Car Wrap | Gloss Vinyl
  • Yellow Metallic Car Wrap | Gloss Vinyl
1 / 1

Frequently asked questions

What does the metallic flake actually do on this yellow?

Fine metal flake sits inside the color layer, so the yellow catches light instead of sitting flat. In sun the flake sparkles and the color pops bright and lively. In shade it settles into a deeper golden yellow. That shift is what separates a metallic wrap from a plain solid color.
Does the gloss metallic yellow feel rough or textured?

No. The flake is in the color layer, not on top, so the surface stays smooth and glossy to the touch. You see the sparkle but you feel a slick glass-like finish, the same as a regular gloss wrap.
Will wrapping my car damage the paint underneath?

Used right, it does the opposite. The vinyl covers your factory paint and takes the daily hits from sun, grit, and light scratches instead of the paint. The yellow comes off clean later, leaving the original finish protected underneath. Healthy, well bonded factory paint is what you want before wrapping.
How is this different from a real metallic yellow respray?

A true metallic-flake respray is expensive, takes your car off the road for a long stretch, and is hard to color match if a panel gets damaged. This wrap gives you a similar flaked yellow for far less, goes on faster, protects the paint you already have, and peels off when you want a different look.
How do I wash and care for the gloss metallic yellow?

Hand wash with a soft mitt and a pH neutral soap, then rinse and dry to keep the gloss sharp. Skip harsh brushes and aggressive automatic washes. Keeping it clean and parking in a garage when you can will keep the flake bright and the wrap looking new for longer.
Can I install this yellow wrap myself?

Yes, plenty of DIY installers do. The Henkel solvent-based acrylic adhesive is air-release, so air bubbles push out through tiny channels and you can reposition the film as you work. You can run a dry or wet install. Panels with deep curves take patience, so start on a flat surface like a roof or hood.
Does the wrap come off cleanly when I want a change?

When removed properly with gentle heat, the vinyl lifts away without tearing up your factory paint. That is the main reason a wrap beats a respray. You can go back to the original color or switch to a new wrap whenever you like.
How much film do I need for my car?

It depends on your vehicle size and how much you are wrapping. Roll length comes in 30ft (9m) and 59ft (18m) options. A small car or a single section like a roof or hood needs far less than a full wrap on a larger vehicle. Measure your panels and add extra for curves and mistakes.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns