Midnight Blue Metallic Car Wrap | Gloss Vinyl
💪 Hurry up! Only 8 left
Give your car a true color change with Midnight Blue Metallic Car Wrap — a deep, late-night blue gloss vinyl wrap with fine metal flake worked right into the color layer. In the shade this midnight blue vinyl wrap reads almost ink-dark, calm and serious. Roll it into direct sun and the flake wakes up, scattering tiny points of light across every panel, so the metallic blue looks like it has real depth instead of one flat tone. The gloss topcoat adds a wet, polished shine that makes this glossy metallic car wrap film look like it just left the booth.
This is a full color change vinyl wrap film, not a coating you brush on. It lays over your factory paint and changes the look completely while shielding the original finish underneath from sun, light scratches and the small dings of daily driving. Because it is a removable car wrap, you can peel it off cleanly later with heat and go back to stock — you get a fresh metallic blue today and your resale paint kept safe for later.

Key features
- Midnight blue metallic color: a deep blue base with fine metal flake, so the finish reads rich in the shade and glints with sparkle in direct sun.
- Gloss vinyl wrap finish: a clear topcoat over the flake gives a wet, glossy shine with real depth — the same look factory metallic paint gets from flake in the basecoat.
- Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition panels as you work.
- Conforms to curves: the polymeric PVC wrap stretches over mirrors, bumpers, hoods, roofs and body lines for a smooth, seamless wrap.
- Protects the paint underneath: your vinyl wrap film takes the daily wear — light scratches, stone chips and UV — while your factory paint stays sealed and original.
- Removable and reversible: it peels off cleanly with heat, so changing color or returning to factory paint is straightforward.
- DIY friendly or professional install: dry or wet application; the air-release adhesive makes panels and accents beginner-friendly, while a professional installer is the safest route for a full-car color change wrap.
Available sizes
This gloss metallic car wrap vinyl is sold in 5 ft (1.52 m) wide rolls in three lengths: 20 ft (6 m) for panels, bumpers and accents, 59 ft (18 m) for most full vehicle wraps, and 76 ft (23 m) for larger cars and vans. Not sure which roll length fits your car? Read our guide on how much vinyl wrap you need by car size before you order.
How a wrapteck metallic wrap works

Specifications
| Product | Midnight blue metallic gloss car wrap vinyl (color change wrap) |
| Material | Polymeric PVC vinyl |
| Finish | Gloss metallic (fine metal flake) |
| Roll width | 5 ft (1.52 m) |
| Roll lengths | 20 ft (6 m) / 59 ft (18 m) / 76 ft (23 m) |
| Face film thickness | 4.1 mil |
| Adhesive | Henkel solvent-based acrylic, air release |
| Adhesive thickness | 1.6 mil |
| Release liner | PET plastic |
| Heat resistance | -30 to +140 °C |
| Application | Dry or wet install; removable with heat |
New to wrapping?
If this is your first vinyl wrap, start with our step-by-step guide on how to wrap a car, then read the basics of vinyl wrap vs PPF to make sure a color change wrap is the right choice for your paint. A professional installer is the safest route for a full-car wrap.
2) Low MOQ. The MOQ in our company is one roll. If your order reaches more than 25 rolls, it could be shipped by sea.
3) Mixed color and item shipment. You could choose as many colors or items as you like and could combine them to ship together.
4) Have passed the SGS authentication by Alibaba.(Please kindly refer to the attachment with many thanks).
5) There are economic series and high-level series of wraps in our factory to meet different customers' demands.
6) Customized service: the outer cartons and backing paper could be made with your customized designs.
7) No warehouse storage risk for you. Our warehouse is your warehouse.
8) Besides the products, we also have a professional sales team to give you good marketing suggestions.
Wrapteck vinyl wrap have ROHS certificate, 6000sqm car vinyl wrpping plant with advanced modern equipment and brilliant development abilities.Environmental protection fabric, imported glue.
All of the fabrics adhere to EU RoHS regulations. Wrapteck automobile vinyl wrapping paper does not release any toxic chemicals or airborne harmful substances under normal conditions.
The imported glue with a 3 mil thickness is ideal for installation and repositioning, since it is slippery, movable, and leaves no residue.
Smart installation, saving labor and money.
Water cube and generous airway technology are used in Wrapteck vehicle packaging paper, which also features imported adhesive and is repositionable. In 4.5 hours,
we measured the average installation time of two installations (compared to 9-12 hours). Thin time films will lower your labor costs and increase your competitiveness.
Labor accounts for 80% of the average overall packaging cost.
140-160gsm backing paper with scale grid.
The design of the 140-160gsm backing paper makes it simple to store automotive packing, and it may be resold after a lengthy period of storage. It's simple to cut the scale grid. Your logo can be printed on any vinyl.
Firm Packaging.
To sell these automotive vinyl wrappers again, our box is made of a sturdy double wallpaper (K = K), which will ensure that the packaging is shipped correctly.
SUGGEST SIZE GUIDE
- Mirco:1.52m*10m(5*32.8ft)
- Hatch:1.52m*13m(5*42.6ft)
- Convertible:1.52*13M(5*42.6ft)
- Coupe:1.52*15M(5*49.2ft)
- Sedan:1.52*18M(5*59ft)
- Small Van:1.52*18M(5*59ft)
- Truck Cab:1.52*18M(5*59ft)
- Small SUV:1.52*20M(5*65.6ft)
- MPV:1.52*23M(5*75.4ft)
- Pickck Truck:1.52*23M(5*75.4ft)
- Large SUV/Sedan:1.52*23M(5*75.4ft)
-
Large Van:1.52*25M(5*82ft)
- To keep your project running smoothly,
- We recommend leaving an extra 6-9 feet (2-3 meters)
- When measuring in case you need extra length during the film process.
- This avoids unnecessary delays or expenses due to insufficient materials.
Midnight Blue Metallic Car ...
1.52*6m(5*20ft) / Midnight BlueGet notified when this item is back in stock
Frequently asked questions
What does the metallic flake actually do on Midnight Blue?
The flake is fine metal mixed into the blue color layer. In shade the car looks deep and ink-dark, and in direct sun the flake catches the light and throws tiny sparkles across the panels. That shift between dark and shimmer is what makes Midnight Blue look richer than a plain solid blue.
Is the surface rough or bumpy from the flake?
No. The flake sits inside the color layer, so the gloss top film stays smooth to the touch. You feel a slick, polished surface like fresh paint, not grit or texture. The sparkle is something you see, not something you feel.
Will wrapping in Midnight Blue damage my paint?
Healthy factory paint is not harmed by the wrap. The film actually protects it from sun fade, light scratches, and small daily marks. The one thing to watch is old paint that is already flaking or full of bad touch-up work, since weak paint can lift when any wrap is removed. Good paint stays safe underneath.
Why pick a metallic wrap over a real metallic respray?
A true metallic-flake respray is a big spend and it is hard to repair if one panel gets scratched. This Midnight Blue wrap costs far less, goes on much faster, and keeps your factory paint untouched beneath it. If you change your mind later, the wrap peels off and your original color is still there. A respray is permanent and a wrap is not.
How do I wash and care for a Midnight Blue metallic wrap?
Hand wash with a soft mitt and a pH-neutral car soap, then rinse and dry with a clean microfiber. Skip harsh solvents, brushes, and automatic brush tunnels. Touchless washing is fine. Keeping it clean helps the gloss and the flake keep their pop, and a wrap kept in a garage out of constant sun will look good for longer.
Can I install this myself with the air-release adhesive?
Yes, plenty of DIY installers do. The Henkel solvent-based acrylic adhesive has air-release channels, so trapped bubbles push out to the edge as you squeegee instead of getting stuck under the film. That gives you more time to line up the blue and reposition before you commit. Flat panels are beginner friendly. Deep curves and bumpers take more heat and patience.
Does Midnight Blue come off cleanly when I want it gone?
When you are ready for a change, warm the film with heat and peel it back slowly at a low angle. On sound factory paint it lifts off and leaves the surface clean. Any light adhesive residue wipes away with a proper adhesive remover. That clean removal is the whole point of going with a wrap.
How much film do I need for my car?
A small coupe or hatch usually needs around the 59ft length to be safe with extra for mistakes. A sedan or larger SUV often needs more than a single 59ft roll once you count mirrors, door jambs, and trim. The 30ft length suits roofs, hoods, and accent pieces. Buying a little extra is smarter than running short mid-job, since dye lots can vary slightly between orders.
-
Free Shipping
-
Secure payment
-
Contact our experts
-
Free Returns