Porsche Polar Grey Gloss Car Wrap | Polymeric Vinyl

Regular price $180.00 USD
Size: 1.52*6m(5*20ft)
Color: Porsche Polar Grey

🎉 Free Shipping! Ready to ship

Porsche Polar Grey Gloss Car Wrap | Polymeric Vinyl
$180.00 USD
1.52*6m(5*20ft) / Porsche Polar Grey

Porsche Polar Grey is a cool, refined grey with a wet gloss finish that reads like a factory paint job at a fraction of the cost. The tone sits between a soft silver and a deep slate, so it shifts with the light and looks sharp on coupes, SUVs, and daily drivers alike. It carries the same understated, premium feel you expect from a high-end European spec, without the respray price tag.

This is a color change wrap, not just a look. The gloss film lays a fresh skin over your panels and takes the daily hits the paint would otherwise absorb, from car wash swirls to fine grit and UV. Your factory paint stays sealed underneath, and when you want a change later the wrap comes off and gives you back the original finish.

Side by side of a car panel in Porsche Polar Grey gloss vinyl wrap next to a fresh respray, showing the wrap matches the painted shine for less cost.

Key features

  • Painted-on gloss finish: a mirror-gloss topcoat gives the deep wet-paint shine without the cost of a respray.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the gloss topcoat holds up to sun and rain across a -30 to +140 degree range.
  • Easy to keep clean: wipes down and washes like paint, with no special care needed.

How a wrapteck gloss wrap is built

Cross section diagram of Porsche Polar Grey gloss vinyl wrap showing the PVC color face, the air-release adhesive layer, and the PET liner.

Specifications

Material Polymeric PVC vinyl
Finish Gloss
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

How long does a Porsche Polar Grey gloss wrap last?

With normal care this gloss grey holds its shine for years. Cars that sleep in a garage and get washed by hand stay crisp the longest, since they dodge constant sun and harsh weather. The film handles heat from -30 to +140 C, so it stays put through summer and winter, but daily sun and rough washing will always shorten the life of any wrap.

Will wrapping in Polar Grey damage my paint?

No. The wrap actually guards your factory paint. The gloss film sits on top and takes the daily wear, like fine grit, light scuffs, and UV, that would otherwise hit the paint. As long as your original paint is healthy and well stuck to the panel when you wrap, it stays protected and sealed underneath the Polar Grey.

How is this different from getting my car resprayed grey?

A respray is permanent, costs a lot more, and means sanding into your factory paint. This Polar Grey wrap is cheaper, goes on faster, and peels off later if you want to switch colors or return to stock. You also seal in your real paint rather than replacing it, which helps the car hold its value if you ever sell.

How much film do I need to wrap my car in Polar Grey?

The rolls are 1.52m wide (5ft) and come in 6m, 18m, and 23m lengths. A small car or partial job like a roof or hood usually fits in 6m. A typical sedan or coupe full wrap lands around 18m, and larger SUVs, trucks, or vans usually want 23m. Buying one continuous length keeps the grey tone consistent across every panel.

Can I install Polar Grey myself?

Yes, this is a DIY-friendly film. The Henkel solvent-based acrylic adhesive is air-release, so it pushes out bubbles as you squeegee instead of trapping them, which makes lining up the grey across panels much more forgiving. You can run a dry or wet install. Take your time on curves and recesses, use a heat source to set the film, and the result looks clean.

Does Polar Grey come off cleanly when I want a change?

Yes. When you are ready for a new look, warm the film gently and pull it back at a low angle and it lifts off in sheets. On healthy factory paint it leaves the surface clean. Any light adhesive trace wipes away with a proper adhesive remover, so your original paint is ready for the next color or stays as it was.

How do I wash and care for a Polar Grey gloss wrap?

Treat it like good paint. Hand wash with a soft mitt and a pH-neutral car soap, rinse well, and dry with a clean microfiber to keep the gloss bright. Skip harsh brushes and stay cautious with automatic car washes since stiff bristles can scratch any wrap. Clean off bird droppings, fuel splashes, and bugs quickly so they do not sit on the film.

Will the grey gloss fade over time?

The film is built to resist UV and hold its tone, so the Polar Grey stays true with regular care. Like any finish, paint included, hard sun day after day will dull it faster, so a garage and routine washing keep the shine looking fresh the longest. Wraps that bake outside all day every day will naturally age sooner.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns