Night Blue Gloss Car Wrap | Polymeric Vinyl

Regular price $150.00 USD
Size: 1.52*6m(5*20ft)
Color: Night Blue

🎉 Free Shipping! Ready to ship

Night Blue Gloss Car Wrap | Polymeric Vinyl
$150.00 USD
1.52*6m(5*20ft) / Night Blue

Night Blue is a deep, midnight-toned blue that pulls light into the panel and gives your car a wet, painted-on glow. In bright sun it reads rich and electric, and under streetlights it settles into a darker, almost black-blue that looks expensive on any body shape. The high-gloss face mirrors the sky and sharpens every line of the car.

This is a polymeric gloss vinyl, not paint protection film. It changes your color and lays a glossy shield over the factory paint, so the panel underneath stays clean and out of the weather while you drive. When you are ready for a change, it comes off and your original paint is still there.

Wrapteck Night Blue gloss vinyl wrap compared with a respray across cost, reversibility, factory paint protection and install time

Key features

  • Painted-on gloss finish: a mirror-gloss topcoat gives the deep wet-paint shine without the cost of a respray.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the gloss topcoat holds up to sun and rain across a -30 to +140 degree range.
  • Easy to keep clean: wipes down and washes like paint, with no special care needed.

How a wrapteck gloss wrap is built

Wrapteck Night Blue gloss vinyl layer structure showing PVC face, solvent-based acrylic air-release adhesive and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Gloss
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

How long does a Night Blue gloss wrap last?

With good care a gloss wrap like Night Blue holds its shine for years. A car that lives in a garage and gets gentle hand washing will keep that deep blue gloss longer than one parked in full sun and weather every day. Treat it well and it stays looking fresh for a long stretch.

Will the wrap damage my factory paint?

No. Night Blue actually protects the paint underneath. The vinyl takes the daily hits from sun, light grime and washing while your original paint stays sealed and clean below it. When the wrap comes off later, the factory finish is still there.

Night Blue gloss wrap or a full respray, which makes more sense?

A wrap is the easier call for most people. A respray in this kind of deep blue costs far more, takes longer and changes your paint forever. Night Blue gives you the same painted-on gloss look, goes on faster, shields the original paint and peels back off whenever you want a different color.

How much Night Blue film do I need for my car?

It comes on a 1.52m wide roll (5ft) in 6m, 18m and 23m lengths. The 6m suits a roof, hood or a set of accents. A full small car usually lands around the 18m mark, and larger cars or SUVs are safer with the 23m. Message us your model and we will help you pick.

Can I install Night Blue myself?

Yes, many DIYers do. The film uses a Henkel solvent-based acrylic air-release adhesive, so air pushes out through tiny channels instead of trapping under the vinyl. You can lay it dry or wet. Flat panels and accents are very doable at home, and a full car is smoother with a second pair of hands or a pro for the tight curves.

Does Night Blue remove cleanly?

Yes. Warm the vinyl with a little heat and it peels away in sheets. The air-release adhesive is made to lift off without tearing up your factory paint, so you are left with your original finish underneath and ready for whatever comes next.

How do I wash and care for a Night Blue wrap?

Hand wash with a mild car soap and a soft mitt, then rinse and dry. Skip harsh brushes and stay clear of automatic car washes with stiff bristles. For a deep color like Night Blue, drying after a wash keeps water spots from dulling that gloss. Park in shade or a garage when you can.

Will the Night Blue gloss fade?

Gloss vinyl is built to hold its color and shine, and the film handles real-world temperatures from -30 to +140 C. Like any finish, constant harsh sun and neglect will wear it faster, so regular gentle washing and shade keep that midnight blue looking deep and glossy for far longer.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns