Viridis Green Gloss Car Wrap | Polymeric Vinyl

Regular price $150.00 USD
Size: 1.52*6m(5*20ft)
Color: Viridis Green

🎉 Free Shipping! Ready to ship

Viridis Green Gloss Car Wrap | Polymeric Vinyl
$150.00 USD
1.52*6m(5*20ft) / Viridis Green

Viridis Green is a rich, jewel-toned green that reads almost wet under the light. The gloss face throws back sharp reflections and gives the color real depth, so a wrapped panel looks like it came painted that way from the factory. It is bold without going neon, the kind of green that turns heads in a parking lot but still looks at home on a daily driver.

This is a color wrap with a job to do. While it gives your car a fresh painted-on look, the polymeric vinyl layer also takes the daily hits for you. Sun, road grime, light scuffs and bird drops land on the film instead of your factory paint. When you are ready for something new, it comes off and leaves the original finish underneath in the same shape you started with.

Side by side of a car panel in Viridis Green gloss vinyl wrap versus a fresh respray, showing the wrap matches the painted look for less.

Key features

  • Painted-on gloss finish: a mirror-gloss topcoat gives the deep wet-paint shine without the cost of a respray.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the gloss topcoat holds up to sun and rain across a -30 to +140 degree range.
  • Easy to keep clean: wipes down and washes like paint, with no special care needed.

How a wrapteck gloss wrap is built

Cutaway diagram of Viridis Green gloss vinyl wrap showing the gloss PVC face, the air-release acrylic adhesive layer and the PET liner.

Specifications

Material Polymeric PVC vinyl
Finish Gloss
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

How long does a Viridis Green gloss wrap last?

With regular washing and sensible care, a Viridis Green wrap holds its deep gloss for years. Cars that sleep in a garage or under cover do best, since less sun and weather means the color and shine stay strong longer. Daily outdoor parking is fine too, the film just appreciates a wash and the odd wipe down.

Will the wrap damage my paint or actually protect it?

It protects it. The Viridis Green film sits on top of your factory paint and takes the daily wear so the paint underneath does not. Sun, grime, light scratches and bird drops hit the vinyl first. As long as your original paint is sound and well stuck to the car, the wrap shields it rather than harms it.

How is a gloss wrap different from a respray?

A respray in this kind of green is permanent, pricey and takes your car off the road for days. A Viridis Green wrap gives you that same painted-on gloss look for less, goes on faster, and peels off later if you want your original color back. It also protects the factory paint instead of replacing it, which helps when you sell the car.

How much film do I need for my car?

The film comes on rolls 1.52m (5ft) wide in 6m, 18m and 23m lengths. A small section like a roof or hood is usually fine on the 6m. A full small car or large accent job tends to land around the 18m. A full size car or SUV, plus extra for mistakes and complex curves, is where the 23m roll fits. When in doubt, size up so you are not short mid-install.

Can I install Viridis Green myself?

Yes. The Henkel solvent-based acrylic adhesive is air-release, so the channels in the glue let trapped air escape and cut down on bubbles as you lay the film. You can run a dry install or a wet install depending on what you are comfortable with. A squeegee, a heat gun and some patience go a long way, especially on curves and edges.

Does the wrap come off cleanly later?

It does. When you are ready for a change, warming the Viridis Green film and pulling it back at a low angle lifts it off without tearing up your paint. Any light adhesive left behind wipes away with a proper adhesive remover. A garage-kept wrap that has not baked in the sun for ages tends to come off the easiest.

How do I wash and care for it?

Treat it like good paint. Hand wash with a mild car soap and a soft mitt, then rinse and dry so you do not get water spots dulling the gloss. Skip harsh solvents and stiff brushes. Get bird droppings, fuel splashes and bug splatter off quickly, since sitting grime is what wears any finish down over time.

Will the green gloss fade?

Viridis Green is built to hold its shine, and with good care it keeps that deep glossy green for years. Constant sun is the main thing that ages any color, wrap or paint. Parking in shade or a garage when you can, and keeping the surface clean, is the simplest way to keep the green looking fresh.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns