1 / 1

Black Rose Metallic Car Wrap | Gloss Vinyl
$170.00 USD
Size: 1.52*9m(5*30ft)
Color: Black Rose

🎉 Free Shipping! Ready to ship

Black Rose Metallic Car Wrap | Gloss Vinyl
$170.00 USD
1.52*9m(5*30ft) / Black Rose
View details

Black Rose sits between a deep wine and a smoked rose, with fine metal flake worked right into the color layer. In the shade it reads dark and moody, almost black with a soft red pulse. Roll it into direct sun and the flake wakes up, throwing a glossy rose sparkle that moves as you walk around the car. It is the kind of finish that looks like one color in your garage and a richer one in the open.

This is a color-change vinyl, not paint. It wraps over your existing panels and shields the factory paint underneath from daily wear, light scratches, and sun. When you want a fresh look later it peels back off, so the paint you started with is still there. Lay it dry or wet, indoors or out, and let the gloss flake do the talking.

Black Rose metallic gloss vinyl wrap next to a costly custom metallic respray, showing the wrap as the cheaper reversible choice

Key features

  • Deep metallic sparkle: fine metal flake runs through the color layer, so the finish reads rich in the shade and glints with sparkle in direct sun.
  • Glossy depth: a clear topcoat over the flake gives a wet, glossy shine with real depth, the same look factory metallic paint gets from flake in the basecoat.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.

How a wrapteck metallic wrap works

Cutaway of how the Black Rose metallic gloss wrap is built, from gloss top layer through the metal-flake color layer to the air-release adhesive and release liner

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic (fine metal flake)
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Black Rose Metallic Car Wrap | Gloss Vinyl
  • Black Rose Metallic Car Wrap | Gloss Vinyl
  • Black Rose Metallic Car Wrap | Gloss Vinyl
  • Black Rose Metallic Car Wrap | Gloss Vinyl
  • Black Rose Metallic Car Wrap | Gloss Vinyl
1 / 1

Frequently asked questions

What does the metallic flake actually do on Black Rose?

The fine metal flake is mixed into the color layer, so it catches light and sends it back at you. On Black Rose that means the deep wine base picks up a rose sparkle in sun, while in shade it settles into a dark, smoky red. It gives the finish real depth instead of one flat tone.
How does Black Rose look in sun versus shade?

In shade it reads dark and close to black with a soft red glow. In direct sun the flake lights up and the rose tones come forward with a glossy shimmer. The shift is gradual as the light changes, which is a big part of why people pick a metallic over a solid color.
Does the wrap feel textured or smooth?

Smooth. The flake lives inside the color layer, not on the surface, so the gloss top is flat and even to the touch. You see the sparkle but you do not feel any grit or bumps when you run your hand over it.
Will wrapping hurt my paint, or does it protect it?

A clean wrap protects more than it harms. The Black Rose film covers your factory paint and takes the daily hits from grit, light scratches, and sun instead of the paint. It uses an air-release adhesive made to come off later, so good original paint stays safe underneath.
Black Rose wrap or a metallic respray, which makes more sense?

A real metallic-flake respray is pricey, takes the car off the road for a while, and is hard to fix if a panel gets damaged. A Black Rose wrap costs far less, goes on faster, peels off when you want a change, and keeps your factory paint intact. For most owners the wrap is the easier call.
How do I wash and care for Black Rose to keep the flake popping?

Hand wash with a mild car soap and a soft mitt, then rinse and dry with a clean microfiber. Skip harsh solvents and stiff brushes. Park in shade or a garage when you can, since wraps kept out of constant sun and heat hold their look longer and last more years.
Can I install Black Rose myself with the air-release adhesive?

Yes, the air-release adhesive is built for DIY. The tiny channels in the glue let trapped air escape so you can push out bubbles as you go, which makes it much more forgiving than a basic sticker film. You can lay it dry or wet, and a heat gun helps it stretch into curves and stay put.
How much film do I need for my car?

It depends on size. A small hatch usually needs around 50 to 55 feet, a sedan about 60 to 65 feet, and a large SUV or truck more. Pick the 30ft or 59ft roll length to match, and order a little extra for mistakes, recuts, and wrapping into edges.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns