1 / 1

Light Violet Purple Metallic Car Wrap | Gloss Vinyl
$170.00 USD
Size: 1.52*6m(5*20ft)
Color: Sky Vast Purple

🎉 Free Shipping! Ready to ship

Light Violet Purple Metallic Car Wrap | Gloss Vinyl
$170.00 USD
1.52*6m(5*20ft) / Sky Vast Purple
View details

Light Violet Purple is a soft, glossy lilac with fine metal flake woven into the color layer. In the shade it reads as a calm, smooth violet with a clean gloss finish. Roll it into direct sun and the flake wakes up, scattering tiny points of light across every panel so the purple looks alive and full of depth. It is the kind of color that turns heads in a parking lot without shouting.

This is a color-change wrap, not paint. It lays a fresh glossy violet over your existing finish while the film and its adhesive sit between the world and your factory paint, taking the daily hit from grit, light scratches, and weather. When you are ready for a change, it comes back off and your original paint is still underneath.

Side by side of a car in Light Violet Purple metallic vinyl wrap next to a costly custom metallic violet respray

Key features

  • Deep metallic sparkle: fine metal flake runs through the color layer, so the finish reads rich in the shade and glints with sparkle in direct sun.
  • Glossy depth: a clear topcoat over the flake gives a wet, glossy shine with real depth, the same look factory metallic paint gets from flake in the basecoat.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.

How a wrapteck metallic wrap works

Cutaway showing how the Light Violet Purple metallic wrap is built, with the flake color layer, adhesive, and liner

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic (fine metal flake)
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Light Violet Purple Metallic Car Wrap | Gloss Vinyl
  • Light Violet Purple Metallic Car Wrap | Gloss Vinyl
  • Light Violet Purple Metallic Car Wrap | Gloss Vinyl
  • Light Violet Purple Metallic Car Wrap | Gloss Vinyl
  • Light Violet Purple Metallic Car Wrap | Gloss Vinyl
  • Light Violet Purple Metallic Car Wrap | Gloss Vinyl
1 / 1

Frequently asked questions

What does the metallic flake actually do on this purple?

The fine metal flake sits inside the color layer of the film. It catches and bounces light, so Light Violet Purple shifts from a calm, even lilac in the shade to a sparkling, deeper violet in direct sun. It is what gives the color its glassy depth instead of looking flat.
Is the surface bumpy or smooth to the touch?

It is smooth. The flake is baked into the color layer under a gloss top surface, so you feel a clean glossy finish, not texture. The sparkle is something you see in the light, not something you feel with your hand.
Will wrapping my car hurt the paint underneath?

No. A proper install protects your paint. The Light Violet Purple film and its air-release adhesive cover the factory finish and take the daily wear from grit, sun, and light scratches. Your original paint stays sealed underneath in the same condition as the day it went on.
How is this different from getting a metallic respray?

A real metallic-flake respray is expensive, takes your car off the road for a long time, and is hard to match or repair if a panel gets damaged. This wrap gives you the same glossy violet sparkle for far less, goes on faster, protects the paint instead of replacing it, and peels off when you want a different look.
How do I wash and care for it?

Hand wash with a soft mitt and a gentle car shampoo, then rinse and dry. Skip harsh brushes and stay back a little with pressure washers. Clean off bird droppings and bug splatter quickly so they do not sit on the gloss. Light Violet Purple holds its shine for years with regular care, and a garage-kept car keeps that flake looking sharp even longer.
Can I install this myself?

Yes, many DIY installers do. The film uses a Henkel solvent-based acrylic air-release adhesive, so air channels let trapped bubbles work out as you squeegee, which makes flat panels far more forgiving. You can run a dry or wet install. Take your time on curves and bumpers, use heat to set it, and the violet lays down clean.
Does it come off cleanly later?

Yes. When you are ready for a new color, the wrap is made to be removed. With gentle heat it lifts away and leaves your factory paint as it was. That reversibility is one of the biggest reasons people choose a wrap over a permanent respray.
How much film do I need for my car?

It depends on the size and shape of your vehicle. We offer 30ft (9m) and 59ft (18m) roll lengths. A small car or a partial job like a roof or hood usually fits the shorter roll, while a full wrap on a sedan or SUV is better with the longer length plus some extra for mistakes and complex curves. When in doubt, size up so you are not short mid-install.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns