Pink Red Gloss Car Wrap | Polymeric Vinyl

Regular price $180.00 USD
Size: 1.52*6m(5*20ft)
Color: Pink Red

🎉 Free Shipping! Ready to ship

Pink Red Gloss Car Wrap | Polymeric Vinyl
$180.00 USD
1.52*6m(5*20ft) / Pink Red

Pink Red sits right between hot pink and deep red, so the panel reads warm and loud without tipping into pure candy pink. In sunlight the gloss pulls out the red edge and the whole car looks wet and freshly painted. Roll into shade and it settles into a richer rose tone. It is a head-turner color that still looks intentional, not a costume.

This is a real gloss vinyl wrap, not a sticker and not paint. It lays a smooth glass-like film over your panels that takes the daily hits first: light scuffs, bug splatter, road grime and UV all land on the wrap instead of your factory paint. When you are ready to move on, it comes back off and the paint underneath is still the paint you started with.

Car panel half wrapped in glossy Pink Red vinyl and half resprayed, showing the wrap match

Key features

  • Painted-on gloss finish: a mirror-gloss topcoat gives the deep wet-paint shine without the cost of a respray.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the gloss topcoat holds up to sun and rain across a -30 to +140 degree range.
  • Easy to keep clean: wipes down and washes like paint, with no special care needed.

How a wrapteck gloss wrap is built

Layer diagram of Pink Red gloss vinyl wrap showing PVC face, acrylic air-release adhesive and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Gloss
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

How long will a Pink Red gloss wrap last?

With normal use and regular washing it holds its gloss and color for years. Heat and constant sun are the main enemies of any film, so a Pink Red car that lives in a garage will stay bright noticeably longer than one parked outside all day. Keep it clean and out of harsh sun when you can and it rewards you.

Will this wrap damage my paint?

No. The opposite, really. The Pink Red film sits on top of your factory paint and takes the daily wear so the paint does not. The Henkel solvent-based acrylic air-release adhesive is made to hold firm while you drive and then release when you remove it, so factory paint in good condition stays protected the whole time it is wrapped.

Why pick a Pink Red wrap over a respray?

A respray in a color this bold is expensive, takes your car off the road for days and is permanent. This wrap costs far less, goes on faster and peels off clean when you want a different look or want to sell. You also get this exact gloss Pink Red shade out of the box instead of chasing a custom paint mix.

How much film do I need for my car?

The rolls are 1.52m (5ft) wide and come in 6m, 18m and 23m lengths. A small section like a roof or hood usually fits in the 6m roll. A full small to mid car typically needs the 18m, and a larger car, SUV or truck, or a first-timer who wants spare film for mistakes, should go with the 23m. When stuck between two sizes, size up.

Can I install Pink Red myself?

Yes, plenty of DIYers do. The air-release adhesive has channels built in that let trapped air escape as you squeegee, so you fight far fewer bubbles. You can run a dry install or a wet install depending on the panel and your comfort level. Take your time on curves and bumpers and a home install can look clean.

Does the wrap come off cleanly later?

It does. Warm the film with a heat gun or in the sun and peel it back at a low angle and the Pink Red lifts off in sheets. On healthy factory paint it leaves little to no residue, and any light adhesive left behind wipes away with adhesive remover. That is what makes wrapping reversible in a way paint never is.

How do I wash and care for a Pink Red wrap?

Treat it gently. Hand wash with a soft mitt and a pH-neutral car shampoo, rinse well and pat dry to avoid water spots on the gloss. Skip harsh brushes and aggressive automatic car washes. Wipe off bird droppings, fuel and bug splatter quickly so they do not sit on the film. Easy care keeps the red looking fresh.

Will the gloss fade over time?

All color fades with enough sun, but this film is built to resist UV and hold its tone, and it handles heat from -30 to +140 C. The biggest factor is exposure. A Pink Red car kept in a garage or under cover holds its deep glossy shade much longer than one baking in full sun every day.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns