With normal driving and basic washing, expect 7 to 10 years of service, and the film is backed by an 8-year warranty. The 7.5mil TPU build is made to hold its jade tone and stay flexible through years of sun, heat and cold.

A vinyl wrap only changes the color. This Jade Green film changes the color and protects the paint at the same time. The 7.5mil TPU layer absorbs rock chips and scratches that would otherwise reach your factory clear coat, so you are decorating and armoring in one step.

Yes. The cashew based topcoat is self-healing, so light swirl marks and fine scratches close up on their own with warmth from the sun or warm water. The deep jade finish stays smooth instead of collecting a web of wash marks over time.

The film blocks 95 to 98 percent of UV, which is the main cause of fading. That UV shield protects both the jade pigment in the film and the paint underneath, so the color holds its depth far longer than a cheap tinted wrap would.

Yes. When you are ready for a change, the film peels off cleanly and leaves your original paint as it was, since the chips and sun were hitting the film and not the paint. Removal is easiest when a little heat is used and the work is unhurried.

The film comes on a 1.52m wide roll in 3m, 6m, 9m and 15m lengths. A bike or single panel can work with 3m, most full sedans and SUVs land around 15m or more, and it helps to add a little extra for trimming and for matching the green across panels.

Yes, this is a wet install film, so you lay it down with slip solution and squeegee out the water, which gives you time to slide and line up the jade tone across panels. First timers should start on flat panels like a hood or doors, and the how-to-wrap guide on this page walks through each step.

It will, as long as you keep the film running the same direction on large panels. The color is consistent roll to roll, so the hood, doors and bumpers read as one even jade tone instead of a patchwork.