1 / 1

Liquid Metallic Jedi Pink PPF | Self-Healing TPU Film
$260.00 USD
Size: 1.52*3m(5*9.8ft)
Color: Pink
Decal installation method: Wet apply

🎉 Free Shipping! Ready to ship

Liquid Metallic Jedi Pink PPF | Self-Healing TPU Color Film
$260.00 USD
1.52*3m(5*9.8ft) / Pink / Wet apply
View details

Liquid Metallic Jedi Pink is a deep, saturated pink with a fine metallic shimmer that shifts as the light moves across your panels. In bright sun it reads bright and electric. Under cloud or street light it pulls darker and richer, almost rose. It is the kind of color that turns heads at a meet and still looks clean parked outside your house.

This is not a sticker. It is colored paint protection film, so the same layer that gives you the metallic pink finish also shields your factory paint from rock chips, road grit, light scratches, and bug acid. You change the whole look of the car and guard the paint underneath at the same time, all in one film.

Liquid Metallic Jedi Pink color PPF compared with standard vinyl wrap, showing the thicker paint protection film layer

Key features

  • Self-healing topcoat: minor scratches and swirl marks fade out with heat from the sun or a heat gun.
  • Hydrophobic surface: water and dirt bead off instead of sticking, so the film stays cleaner for longer.
  • Acid rain and oxidation resistant: holds up against acid rain, oxidation and yellowing over years of daily driving.
  • Stain and penetration resistant: bird droppings, tree sap and grease do not soak into the film.
  • Flexible and tear resistant: high elongation and tensile strength let it stretch over curves without cracking.
  • Mirror-gloss finish: the glass-crystal top layer boosts paint depth and gloss by up to 40 percent and smooths out orange peel.
  • Removable adhesive: peels off cleanly with heat, with no glue residue left behind.
  • Bubble-free install: designed to lay flat without bubbling, warping or lifting at the edges.

The Wrapteck 3-layer TPU structure

Three-layer TPU structure of Liquid Metallic Jedi Pink paint protection film with self-healing topcoat, color layer, and adhesive

Specifications

Material TPU (thermoplastic polyurethane)
Thickness 7.5mil (330 ± 10µm)
Structure 3 layers
Raw material Lubrizol TPU resin
Adhesive Ashland acrylic adhesive
Topcoat Cashew-based coating
Application Wet install
Roll width 1.52m (5ft)
Roll lengths 3m, 6m, 9m and 15m
Warranty 2 years
Expected service life Up to 8 years

Lab test report

Performance level Premium Material

TPU—Thermoplastic Polyurethane Elastomer
Temperature resistance -40°c to +120°c Surface Type Anti-scratch TPU PPF Car Surface Protection Film
Film thickness (with glue) 140micron Release paper 140g/m2, Silicone coated with air channels
Adhesive thickness 30μm

 

Adhesive

 Henkel solvent-based Acrylic-based, repositionable, slidable
Adhesive type Pressure-sensitive Texture Effect Anti-scratch  Color TPU PPF Car Surface Protection Film
Adhesive power 18N/25mm Adhesive features Air-Release, Permanent, Removable
Heat temperature More than +120°c Tensile strength Along: min. 19Mpa, Across: min 19Mpa
Application method Dry & Wet Installation Application surface Compound curves, Concave surfaces, Corrugations, Flat, Simple curves
Removability Removable with heat Elongation Along: min. 130%, Across: min. 150%
Application temperature +8°C minimum (air and substrate) Application Cars & Vans, Trucks, Watercraft, Laptop, Cell phones, Wall, Furniture etc.
Expected Durability 8 years Features Stretchable, Removable, UV proof, Weather proof, Water proof, Resistant to solvents, Easy cleaning, Easy maintenance, Stylish, can stick any where

 

Maybe you want to know

PPF, TPU, and TPH: What Each One Does and Which One Your Car Needs

Does PPF Yellow? What Causes It and How to Keep Film Clear

Vinyl Wrap vs PPF: Which One Your Car Needs, and When

PPF vs Vinyl Wrap: Cost, Protection and Which to Choose

New to wrapping?

If this is your first film, start with our guide on how to wrap a car. This is a wet-install film, so you can do panels and accents at home, and a professional installer is the safest route for a full-car wrap.
Color pattern Pink
Translation missing: en.metafields.shopify.decal-installation-method Wet apply, Dry apply
Decoration material TPU
Vehicle application area Vinyl, Exterior
Vehicle decor features Scratch resistant, UV resistant, Waterproof, Heat resistant, Easy to apply, Self Healing, Sand Proof, Removable, Stretchable
Vehicle type Car, Recreational vehicle, Watercraft, Van, Truck, SUV, Motorcycle, Golf cart, Mirco, Hatch, Convertible, Coupe, Sedan, Pickck Truck
  • Liquid Metallic Jedi Pink PPF | Self-Healing TPU Color Film
  • Liquid Metallic Jedi Pink PPF | Self-Healing TPU Color Film
  • Liquid Metallic Jedi Pink PPF | Self-Healing TPU Color Film
  • Liquid Metallic Jedi Pink PPF | Self-Healing TPU Color Film
  • Liquid Metallic Jedi Pink PPF | Self-Healing TPU Color Film
1 / 1

Frequently asked questions

How long does Jedi Pink PPF last on a car?

Expect 7 to 10 years of real life on the car when it is installed well and washed normally. The film carries an 8-year warranty, and the metallic pink holds its depth across that time because the topcoat blocks 95 to 98 percent of UV before it can reach the color.
What is the difference between colored PPF and a vinyl wrap?

Vinyl only decorates. It changes the color and stops there. Liquid Metallic Jedi Pink is paint protection film, so it gives you the same bold color change plus a tough 7.5mil TPU shield that takes rock chips and scratches for your paint. With vinyl you are still exposed underneath. With this you are covered.
Does this pink film actually self-heal?

Yes. The cashew oil topcoat is self-healing, so light swirl marks and fine scratches from washing or daily driving close up on their own. Warmth from the sun speeds it up, and a little heat from warm water does the same. The Jedi Pink metallic stays looking fresh instead of collecting micro scratches.
Will the metallic pink color fade over time?

The color sits under a topcoat that stops 95 to 98 percent of UV, which is what causes most fading. That keeps the metallic shimmer and the deep pink tone stable for years. Keep it washed and out of harsh chemicals and it will hold its look well across the 7 to 10 year span.
Can I remove it later without damaging my paint?

Yes. Because it is a protection film bonded with a clean-release Ashland adhesive, it comes off in sheets when you want a change and leaves your factory paint as it was. Your original paint stays protected underneath the whole time it is on, which is great if the car is leased or you plan to resell.
How much Jedi Pink film do I need for my car?

The roll is 1.52m wide and comes in 3m, 6m, 9m, and 15m lengths. A small car or a partial wrap usually works from 6 to 9m, a sedan often lands near 15m, and a full SUV or large car may need more than one roll. Measure your panels and add a little extra for trimming around curves and edges.
Can I install Jedi Pink PPF myself at home?

A patient DIYer can do it. This is a wet install film, so you spray slip solution on the panel, position the pink film, then squeegee out the water and air. Flat and gently curved panels are very doable in a clean garage. For deep curves and tight bumpers, take your time or split the job with an installer.
Does Jedi Pink come glossy, and will it stay shiny?

The liquid metallic finish reads as a rich glossy pink with a fine flake that catches the light. The topcoat keeps that gloss alive by resisting UV and shrugging off light marks that would dull a cheaper film. A normal wash brings the shine right back.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns