• Liquid Metallic Vinyl Car Wrap - wrapteck
1 / 1

Olympic Blue Liquid Metal Car Wrap | Car Vinyl
$190.00 USD
Size: 1.52*6m(5*20ft)
Color: Olympic Blue

🎉 Free Shipping! Ready to ship

Liquid Metallic Vinyl Car Wrap - wrapteck
$190.00 USD
1.52*6m(5*20ft) / Olympic Blue
View details

Olympic Blue is a deep, sporting blue with fine metal flake worked right into the color layer. In the shade it reads as a rich, cool blue with real depth. Roll into direct sun and the liquid metal finish wakes up, throwing a bright mirror-like glow that ripples across every curve of the body as you move around the car. It is the look of a high-end metallic respray without the brush, the booth, or the bill.

This is a color-change wrap, so it does more than just look good. The film lays a tough layer over your factory paint and takes the daily hits of grit, light scratches, bird mess, and sun instead of the clearcoat underneath. When you are ready for a change, it peels back off and your original paint is still there waiting.

Olympic Blue liquid metal metallic vinyl wrap next to an expensive custom metallic respray, showing the cheaper reversible wrap option.

Key features

  • Liquid-metal shine: a high-shine metallic surface that reads almost reflective, throwing a bright mirror-like glow in the sun and catching light at night.
  • Deep flake color: fine metal flake under the topcoat gives the color real depth, so it never looks flat.
  • Air-release adhesive: built-in air channels push bubbles out for a clean, flat lay you can reposition.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.

How a wrapteck metallic wrap works

Cutaway of how the Olympic Blue metallic finish is built, with the metal-flake color layer over the acrylic air-release adhesive and PET liner.

Specifications

Material Polymeric PVC vinyl
Finish Liquid metal (high-shine reflective metallic)
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Liquid Metallic Vinyl Car Wrap - wrapteck
  • Olympic Blue Liquid Metal Car Wrap | Car Vinyl
  • Olympic Blue Liquid Metal Car Wrap | Car Vinyl
  • Olympic Blue Liquid Metal Car Wrap | Car Vinyl
  • Olympic Blue Liquid Metal Car Wrap | Car Vinyl
  • Olympic Blue Liquid Metal Car Wrap | Car Vinyl
1 / 1

Frequently asked questions

What does the metal flake actually do on Olympic Blue?

The flake sits inside the color layer and catches light from different angles. That is what gives Olympic Blue its shift from a deep, calm blue in shade to a bright, almost reflective sparkle in full sun. A plain solid blue stays flat all day. This one changes with the light and shows off the lines of the car.
Is the surface bumpy or smooth to the touch?

It is smooth. The flake is mixed into the color layer under a high-shine top, so you see the metallic sparkle but your hand feels a slick, even finish. There is no grit or texture on the surface.
Will wrapping hurt my paint, or does it help it?

It helps. Olympic Blue goes on over healthy factory paint and shields it from sun, road grit, light scratches, and bird droppings. The wrap takes that daily wear instead of your clearcoat. When you remove it later, the paint underneath stays protected and original.
How is this different from a real metallic respray?

A true metallic-flake respray is expensive, takes your car off the road for days, and is a pain to fix if it gets damaged. This wrap gives you a similar Olympic Blue metallic glow for far less, goes on much faster, and peels off clean when you want a change. A respray is permanent. A wrap is not.
How do I wash and care for an Olympic Blue wrap?

Hand wash with a mild car soap and a soft mitt, then rinse and dry with a microfiber towel. Skip harsh brushes and stay back a bit with pressure washers. Clean off bug splatter and bird mess quickly so they do not sit on the film. Parked in a garage out of constant sun, the metallic finish holds its shine for years.
Can I install this myself?

Yes. The Henkel solvent-based acrylic adhesive is air-release, so the channels let trapped air escape and let you slide and reposition the film while you work. You can do a dry or wet install. Flat panels are friendly for first-timers. Deep curves and mirrors take more patience and a heat gun, so plenty of DIY installers start there and build up.
Does it remove cleanly later?

When the wrap has been applied to sound factory paint and you warm it gently with a heat gun on removal, it lifts away cleanly and leaves your original Olympic Blue-covered paint behind. Take your time and pull at a low angle for the best result.
How much film do I need for my car?

It depends on the size and shape of your vehicle. A small hatch needs far less than a large SUV or truck. The film comes in 30ft (9m) and 59ft (18m) roll lengths. For a full wrap, measure your panels and add extra for mistakes and curves. If you are only doing a roof, hood, or mirrors, the shorter roll usually covers it.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns