Ceramic Lavender Blue Matte Car Wrap | Polymeric Vinyl

Regular price $170.00 USD
Size: 1.52*6m(5*20ft)
Color: Lavender Blue

🎉 Free Shipping! Ready to ship

Ceramic Lavender Blue Matte Car Wrap | Polymeric Vinyl
$170.00 USD
1.52*6m(5*20ft) / Lavender Blue

Ceramic Lavender Blue lands somewhere between cool steel and soft pastel, a muted blue with a quiet lavender lean that reads calm in shade and brightens under open sky. The flat matte surface kills every reflection, so the body shows its shape instead of bouncing back glare. It is the kind of color that makes people look twice without shouting.

The wrap goes on over your existing paint and seals it off from sun, light scuffs, road grime, and the small marks daily driving leaves behind. Your factory finish stays sealed underneath, and when you want a change later the film comes off. You get a fresh flat-matte stealth look now and your original paint kept clean for the day you sell.

Car panel wrapped in Ceramic Lavender Blue matte vinyl next to a glossy respray, showing the flat non-reflective finish and reversible wrap advantage

Key features

  • Flat matte finish: a non-reflective topcoat gives the factory-flat, no-shine look that paint cannot match without a costly custom job.
  • Hides minor flaws: the matte surface softens light, so it disguises small swirls and imperfections instead of spotlighting them like gloss does.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the topcoat holds up to sun and rain across a -30 to +140 degree range.

How a wrapteck matte wrap is built

Layer diagram of Ceramic Lavender Blue matte vinyl wrap showing the matte PVC face, air-release acrylic adhesive, and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Matte (flat, non-reflective)
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

How long will a Ceramic Lavender Blue matte wrap last?

With good care it holds its flat lavender-blue finish for years. The biggest factor is where the car lives. A garage-kept car keeps the matte surface looking fresh much longer than one parked in full sun every day. Wash it by hand, skip the harsh chemicals, and the color stays even and true.

Will the wrap damage my paint or actually protect it?

It protects it. The film sits on top of your factory paint and takes the daily hits instead, sun, light scratches, bird mess, and road grime. The Ceramic Lavender Blue layer shields the original finish, and because the adhesive is made to release cleanly, healthy factory paint stays safe underneath the whole time it is on.

How is this different from getting a matte respray in this color?

A matte paint job in a shade like this is expensive, permanent, and very hard to repair without redoing whole panels. Wrapping in Ceramic Lavender Blue costs less, goes on faster, and comes back off when you want a change. You also keep your real paint underneath, which a respray destroys the moment the spray gun starts.

How do I wash and care for a matte wrap?

This is the one thing to get right. Never wax, polish, or machine-buff a matte wrap, because all three create shiny patches that ruin the flat look of Ceramic Lavender Blue. Hand wash only with a matte-safe soap, skip the automatic brush washes, and wipe off fuel splashes or bird mess quickly before they sit. That keeps the finish dead flat and even.

Can I install it myself?

Yes, plenty of DIY owners do. The film uses a Henkel air-release acrylic adhesive, so trapped air bubbles push out to the edges instead of leaving lumps, which makes flat panels very forgiving. You can install dry or wet. Big curves like bumpers take patience and heat, so many first-timers wrap the easy panels themselves and leave the tricky corners to a shop.

Does the wrap come off cleanly later?

It does. When you are ready for a change, warm the Ceramic Lavender Blue film with gentle heat and peel it back slowly. The acrylic adhesive is designed to release without tearing up sound factory paint, so you are left with your clean original finish rather than a sticky mess.

Will it stay flat matte or go shiny over time?

It stays flat as long as you care for it like a matte surface. Shiny spots on any matte wrap come from waxing, polishing, buffing, or scrubbing too hard in one place. Avoid all of that, hand wash gently, and Ceramic Lavender Blue keeps its even non-reflective look across every panel.

How much film do I need for my car?

The rolls are 1.52m (5ft) wide and come in 6m, 18m, and 23m lengths. As a rough guide, a small car or full bike usually fits in around 6m, a sedan often lands near 18m, and a large SUV or truck or a full wrap with extra for mistakes is safer at 23m. Buy a bit more than the bare minimum so you have room for trimming and any redo.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns