Ceramic White Matte Car Wrap | Polymeric Vinyl
🎉 Free Shipping! Ready to ship
Ceramic White is a clean, soft white with a fully flat matte finish. There is no gloss and no sparkle, just a calm chalky white surface that reads more like stone than paint. In daylight it looks crisp and modern. Under streetlights it stays muted instead of throwing back glare, which is exactly the stealth look most matte fans are chasing.
This is a color wrap, not paint protection film. The vinyl lays over your existing paint and takes the daily hits of dust, light scratches and washing for you, while completely changing the look of the car. When you want a different color later, or want the original paint back, the wrap comes off and the factory finish is still underneath.

Key features
- Flat matte finish: a non-reflective topcoat gives the factory-flat, no-shine look that paint cannot match without a costly custom job.
- Hides minor flaws: the matte surface softens light, so it disguises small swirls and imperfections instead of spotlighting them like gloss does.
- Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
- Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
- Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
- Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
- UV and weather resistant: the topcoat holds up to sun and rain across a -30 to +140 degree range.
How a wrapteck matte wrap is built

Specifications
| Material | Polymeric PVC vinyl |
| Finish | Matte (flat, non-reflective) |
| Face film thickness | 3.7 to 4.1mil |
| PVC face film | 90 micron |
| Adhesive | Henkel solvent-based acrylic, air-release |
| Adhesive thickness | 1.6mil |
| Release liner | PET plastic, 75 micron |
| Heat resistance | -30 to +140°C |
| Roll width | 1.52m (5ft) |
| Roll lengths | 6m, 18m and 23m |
| Application | Dry or wet install |
New to wrapping?
If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
2) Low MOQ. The MOQ in our company is one roll. If your order reaches more than 25 rolls, it could be shipped by sea.
3) Mixed color and item shipment. You could choose as many colors or items as you like and could combine them to ship together.
4) Have passed the SGS authentication by Alibaba.(Please kindly refer to the attachment with many thanks).
5) There are economic series and high-level series of wraps in our factory to meet different customers' demands.
6) Customized service: the outer cartons and backing paper could be made with your customized designs.
7) No warehouse storage risk for you. Our warehouse is your warehouse.
8) Besides the products, we also have a professional sales team to give you good marketing suggestions.
Wrapteck vinyl wrap have ROHS certificate, 6000sqm car vinyl wrpping plant with advanced modern equipment and brilliant development abilities.Environmental protection fabric, imported glue.
All of the fabrics adhere to EU RoHS regulations. Wrapteck automobile vinyl wrapping paper does not release any toxic chemicals or airborne harmful substances under normal conditions.
The imported glue with a 3 mil thickness is ideal for installation and repositioning, since it is slippery, movable, and leaves no residue.
Smart installation, saving labor and money.
Water cube and generous airway technology are used in Wrapteck vehicle packaging paper, which also features imported adhesive and is repositionable. In 4.5 hours,
we measured the average installation time of two installations (compared to 9-12 hours). Thin time films will lower your labor costs and increase your competitiveness.
Labor accounts for 80% of the average overall packaging cost.
140-160gsm backing paper with scale grid.
The design of the 140-160gsm backing paper makes it simple to store automotive packing, and it may be resold after a lengthy period of storage. It's simple to cut the scale grid. Your logo can be printed on any vinyl.
Firm Packaging.
To sell these automotive vinyl wrappers again, our box is made of a sturdy double wallpaper (K = K), which will ensure that the packaging is shipped correctly.
| Specification name | Specification Value |
|---|---|
| Color pattern | white |
| Decoration material | Polyvinyl chloride (PVC), Plastic, Vinyl |
| Vehicle application area | Exterior, Interior |
| Vehicle decor features | Heat resistant, Waterproof, Easy to apply, Removable, UV resistant, Scratch resistant |
| Vehicle type | Van, Car, Watercraft, Truck, Pickck Truck, Sedan, Coupe, Convertible, Hatch, Mirco, Golf cart, Recreational vehicle, SUV, Motorcycle |
SUGGEST SIZE GUIDE
- Mirco:1.52m*10m(5*32.8ft)
- Hatch:1.52m*13m(5*42.6ft)
- Convertible:1.52*13M(5*42.6ft)
- Coupe:1.52*15M(5*49.2ft)
- Sedan:1.52*18M(5*59ft)
- Small Van:1.52*18M(5*59ft)
- Truck Cab:1.52*18M(5*59ft)
- Small SUV:1.52*20M(5*65.6ft)
- MPV:1.52*23M(5*75.4ft)
- Pickck Truck:1.52*23M(5*75.4ft)
- Large SUV/Sedan:1.52*23M(5*75.4ft)
-
Large Van:1.52*25M(5*82ft)
- To keep your project running smoothly,
- We recommend leaving an extra 6-9 feet (2-3 meters)
- When measuring in case you need extra length during the film process.
- This avoids unnecessary delays or expenses due to insufficient materials.
Ceramic White Matte Car Wra...
1.52*1m(5*3.3ft) / whiteGet notified when this item is back in stock
Frequently asked questions
How long will a Ceramic White matte wrap last?
With good care it lasts for years. A car that lives in a garage or under cover will hold the flat white look longer than one parked in full sun every day. Hand washing and quick cleanup of any dirt or fuel splashes also make a real difference over time. We do not quote a fixed number of years because real life depends on your climate and how you treat it.
Will the wrap damage my paint or actually protect it?
It protects it. The Ceramic White vinyl sits on top of your factory paint and takes the daily dust, light scratches and wash swirls instead of the paint itself. As long as your original paint is healthy and well stuck down when you wrap it, the film shields the surface underneath and removes cleanly later.
Is a matte wrap cheaper than a matte respray?
Yes, by a wide margin in most cases. A proper matte paint job is one of the most expensive finishes a body shop can do, and matte paint is very hard to fix if it gets scratched or you need a panel repaired. Ceramic White vinyl gives you that same flat white look for far less, it goes on faster, and you can reverse it whenever you want.
How do I wash and care for a matte wrap?
This is the most important part. Never wax, polish or machine buff Ceramic White, because any of those will create shiny patches in the matte surface and you cannot undo it. Hand wash only with a soap made for matte finishes, skip the automatic brush car washes, and wipe off fuel, bird mess or bug splatter quickly before it sets. Treat it gently and the flat white stays even.
Can I install it myself?
Many DIY installers do. The film has a Henkel solvent-based acrylic air-release adhesive, so trapped air can be pushed out to the edges instead of leaving bubbles, and it works dry or wet. Flat panels like doors and the roof are very doable at home. Tight curves, bumpers and mirrors take patience and a heat gun, so go slow on your first wrap or split those panels with a friend.
Will it stay flat or eventually go shiny?
It stays flat if you care for it correctly. The matte look comes from the surface of the film itself, so the only thing that makes a matte wrap go shiny is wax, polish, buffing or hard rubbing in one spot. Avoid those, hand wash gently, and Ceramic White keeps its even non-reflective finish.
Does the wrap come off cleanly?
Yes. When you are ready for a change, the vinyl can be warmed and peeled away, and a properly applied wrap on healthy paint lifts off without taking the factory finish with it. That clean removal is a big reason people choose a wrap over a permanent respray.
How much film do I need for my car?
The Ceramic White rolls are 1.52m (5ft) wide and come in 6m, 18m and 23m lengths. As a rough guide, a small car or a partial job like a roof and mirrors fits the 6m roll, most sedans and coupes land around the 18m roll, and larger SUVs, trucks or anyone who wants extra for mistakes should go with the 23m. When in doubt, size up so you are not short on a tricky panel.
-
Free Shipping
-
Secure payment
-
Contact our experts
-
Free Returns


