Heavy Metal Flame Green Matte Car Wrap | Polymeric Vinyl

Regular price $190.00 USD
Size: 1.52*6m(5*20ft)
Color: Matte Flame Green

🎉 Free Shipping! Ready to ship

Heavy Metal Flame Green Matte Car Wrap | Polymeric Vinyl
$190.00 USD
1.52*6m(5*20ft) / Matte Flame Green

Heavy Metal Flame Green is a deep, moody green with a completely flat finish. There is no shine and no mirror reflection, so the color reads as solid and stealthy in any light. It shifts from a dark forest tone in shade to a richer, almost glowing green under direct sun, which is where the Flame Green name earns its keep.

This is a color wrap, not a clear film. It lays a fresh matte skin over your panels and seals the factory paint underneath away from sun, light scuffs, road grime and everyday wear. When you want to change the look later, it comes off and the original paint is still there waiting.

Side by side comparison of a car wrapped in Heavy Metal Flame Green matte vinyl versus a costly matte respray

Key features

  • Flat matte finish: a non-reflective topcoat gives the factory-flat, no-shine look that paint cannot match without a costly custom job.
  • Hides minor flaws: the matte surface softens light, so it disguises small swirls and imperfections instead of spotlighting them like gloss does.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the topcoat holds up to sun and rain across a -30 to +140 degree range.

How a wrapteck matte wrap is built

Layer structure diagram of Heavy Metal Flame Green matte vinyl wrap showing the PVC face, acrylic adhesive and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Matte (flat, non-reflective)
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

How long does a Heavy Metal Flame Green matte wrap last?

With good care it holds its flat green look for years. Heat, harsh sun and automatic brush washes are what age any matte wrap fastest, so a car that lives in a garage will keep its finish looking fresh much longer than one parked outside all day. Hand washing and quick cleanup of spills also stretch its life.

Will the wrap damage my factory paint?

No. The film actually protects the paint it covers. The Heavy Metal Flame Green face shields your original finish from sun, light scratches and road grime, and the air-release acrylic adhesive is designed to lift away cleanly later. As long as your factory paint is healthy and well bonded when you wrap, it stays safe underneath.

Matte wrap or a matte respray, which makes more sense?

A matte respray is one of the most expensive and least forgiving paint jobs you can get, and any future repair has to blend perfectly or it shows. Wrapping in Heavy Metal Flame Green costs far less, goes on faster, and protects the paint you already paid for. If you ever want a different look, you peel the wrap instead of repainting the whole car.

How do I wash and care for a matte wrap?

This is the big one for matte. Never wax, polish or machine buff Heavy Metal Flame Green, because those leave shiny patches that ruin the flat finish. Hand wash with a matte-safe car soap, skip automatic brush washes, and rinse off fuel splashes, bird mess and bug splatter quickly before they sit. Treat it gently and the flat green stays even across every panel.

Can I install it myself?

Yes, plenty of DIY installers do. The Henkel solvent-based acrylic adhesive is air-release, so trapped bubbles push out to the edge through tiny channels instead of leaving lumps. You can install it dry or wet. Take your time on curves and recesses, use steady heat to relax the film, and work panel by panel. Patience matters more than speed.

Does it remove cleanly when I am done?

In most cases yes. Warm the film gently and peel it back at a low angle and the Heavy Metal Flame Green vinyl lifts off without taking your paint with it. Healthy factory paint handles removal well. Very old, cracked or previously repainted panels are the ones to be careful with, so check those areas before you wrap.

Will it stay flat or eventually go shiny?

It stays matte as long as you care for it the matte way. Shiny spots on any matte wrap almost always come from waxing, polishing, buffing or scrubbing too hard in one place. Avoid those, hand wash gently, and your Heavy Metal Flame Green keeps its even non-reflective finish across the whole car.

How much film do I need for my car?

The rolls are 1.52m (5ft) wide and come in 6m, 18m and 23m lengths. As a rough guide, a small car or a set of accent panels works with shorter lengths, a full sedan usually lands around the 18m mark, and a large SUV, truck or anyone who wants spare film for mistakes should size up to 23m. Always add a little extra for door jambs, mirrors and practice.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns