Description
Our Advantage
Quality Assurance
Satin Matte Rose Gold gives your car a soft, warm metallic glow with none of the high shine. It sits between pink and champagne, so it shifts in tone as the light moves over the panels. The flat satin finish hides reflections and reads as quiet and expensive in daylight or under street lights. It is a color that turns heads without shouting.
This is paint protection film, not vinyl, so it does two jobs at once. The rose gold tone lives in the film while the 7.5mil TPU layer underneath takes the rock chips, road grit, and wash swirls that would normally hit your factory paint. You change the look of the car and shield the paint you already paid for in a single install.
Key features
- Self-healing topcoat: minor scratches and swirl marks fade out with heat from the sun or a heat gun.
- Hydrophobic surface: water and dirt bead off instead of sticking, so the film stays cleaner for longer.
- Acid rain and oxidation resistant: holds up against acid rain, oxidation and yellowing over years of daily driving.
- Stain and penetration resistant: bird droppings, tree sap and grease do not soak into the film.
- Flexible and tear resistant: high elongation and tensile strength let it stretch over curves without cracking.
- Mirror-gloss finish: the glass-crystal top layer boosts paint depth and gloss by up to 40 percent and smooths out orange peel.
- Removable adhesive: peels off cleanly with heat, with no glue residue left behind.
- Bubble-free install: designed to lay flat without bubbling, warping or lifting at the edges.
The Wrapteck 3-layer TPU structure
Specifications
| Material | TPU (thermoplastic polyurethane) |
| Thickness | 7.5mil (330 ± 10µm) |
| Structure | 3 layers |
| Raw material | Lubrizol TPU resin |
| Adhesive | Ashland acrylic adhesive |
| Topcoat | Cashew-based coating |
| Application | Wet install |
| Roll width | 1.52m (5ft) |
| Roll lengths | 3m, 6m, 9m and 15m |
| Warranty | 8 years |
Lab test report
| Test | Result | Method |
|---|---|---|
| Thickness | 330 ± 10µm | Mitutoyo thickness meter |
| Elongation at break | 100N | ASTM D624-2000 |
| Puncture resistance | >15N | GB/T 10004 |
| Tensile strength | 25MPa | ASTM D638-2014 |
| Finished film elongation | >300% | ASTM D882 |
| Max operating temperature | 100°C to 120°C | GB/T 7141-2008 |
| Anti-yellowing | B value <5 | GB/T 16422.3-2014, QUV 5000 hours |
| Adhesive hold strength | >2200g | GB/T 4851 |
| UV resistance | 95% to 98% blocked | GB/T 2680 |
| Gloss level | 95GU | 3NH gloss meter, 60 degree |
New to wrapping?
If this is your first film, start with our guide on how to wrap a car. This is a wet-install film, so you can do panels and accents at home, and a professional installer is the safest route for a full-car wrap.
| Specification name | Specification Value |
|---|---|
| Color pattern | Gold |
| Decoration material | Vinyl, TPU |
| Vehicle application area | Vinyl, Exterior |
| Vehicle decor features | Scratch resistant, UV resistant, Waterproof, Heat resistant, Easy to apply, Self Healing, Sand Proof, Removable, Stretchable |
| Vehicle type | Car, Recreational vehicle, Watercraft, Van, Truck, SUV, Motorcycle, Golf cart, Mirco, Hatch, Convertible, Coupe, Sedan, Pickck Truck |
