Beets Purple Red Super Gloss Car Wrap | Polymeric Vinyl

Regular price $180.00 USD
Color: Beets Purple Red
Size: 1.52*6m(5*20ft)

🎉 Free Shipping! Ready to ship

Beets Purple Red Super Gloss Car Wrap | Polymeric Vinyl
$180.00 USD
Beets Purple Red / 1.52*6m(5*20ft)

Beets Purple Red sits right between a rich plum and a deep wine red. In low light it reads as a dark royal purple, and the moment the sun hits it the red wakes up and glows. The gloss finish gives it that wet, just-painted shine that pulls eyes across a parking lot, while the color stays moody and grown up instead of loud.

This is a full color change wrap, not a coating you brush on. The film lays a fresh layer of Beets Purple Red over your existing panels, so the gloss you see is the surface, and your factory paint sits protected underneath it from sun, light scuffs, and the grime of daily driving. When you want a new look later, it comes back off and your original paint is still there.

Side by side of a gloss Beets Purple Red vinyl wrap versus a Beets Purple Red respray, showing the wrap as the cheaper reversible option.

Key features

  • Painted-on gloss finish: a mirror-gloss topcoat gives the deep wet-paint shine without the cost of a respray.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the gloss topcoat holds up to sun and rain across a -30 to +140 degree range.
  • Easy to keep clean: wipes down and washes like paint, with no special care needed.

How a wrapteck gloss wrap is built

Layer diagram of the gloss Beets Purple Red vinyl wrap showing the PVC color face, acrylic air-release adhesive, and PET liner.

Specifications

Material Polymeric PVC vinyl
Finish Gloss
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

How long does a Beets Purple Red gloss wrap last?

With normal care it holds its gloss and deep color for years. Heat, sun, and harsh washing are what wear any wrap down over time, so a car that sleeps in a garage will keep that purple-red shine looking fresh much longer than one parked outside all day. Wash it gently and it rewards you.

Will this wrap damage my paint or actually protect it?

It protects it. The Beets Purple Red film sits on top of your factory paint and takes the daily hits instead, the sun, the light scratches, the road film. As long as your original paint is healthy and well stuck down when you wrap, the film peels off later without harming what is underneath. It is a shield, not a risk.

Should I get a Beets Purple Red wrap or just respray my car this color?

A wrap is the easier call for most people. It costs less than a quality respray, it goes on faster, and it is reversible, so you are not locked into Beets Purple Red forever. It also keeps your real paint untouched and protected, which helps when you sell. A respray is permanent and changes the paint itself. The wrap gives you the same head-turning gloss color with a lot more freedom.

How much film do I need for my car?

The rolls are 1.52m wide, which is 5 feet, and come in 6m, 18m, and 23m lengths. As a rough guide, a small car or a few panels works with the shorter rolls, while a full sedan usually wants around 18m and a larger SUV or truck leans toward 23m. Always add a little extra for mistakes and complex curves. If you are unsure, message us with your vehicle and we will point you to the right length.

Can I install Beets Purple Red myself?

Yes, plenty of DIY installers do. The Henkel air-release adhesive has tiny channels that let trapped air escape, so bubbles push out instead of getting stuck, which makes laying the film far more forgiving. You can install dry or wet. Take your time on the curved areas, use a little heat to shape it, and that gloss purple-red lays down clean.

Does the wrap come off cleanly later?

It does. When you are ready for a change, warm the Beets Purple Red film with a heat gun and peel it back slowly at a low angle. On sound factory paint it lifts away and any light adhesive left behind wipes off with adhesive remover. That is the whole point of a wrap, a bold color now and your original paint waiting underneath later.

How do I wash and care for it?

Treat it like nice paint. Hand wash with a mild soap and a soft mitt, rinse well, and dry with a clean microfiber so you do not leave water spots on the gloss. Skip harsh brushes and automatic car washes with stiff bristles. Knock bird droppings and bug splatter off quickly, since those can stain if left to bake on the purple-red surface.

Will the gloss fade over time?

Beets Purple Red is built to hold its color, and the film handles real heat, rated from -30 up to +140 C. Like anything that lives in sunlight, years of harsh UV will slowly dull any finish, but good care and garage parking keep that deep glossy purple-red looking rich far longer. A quick wash routine does most of the work.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns