Tiffany Blue Super Gloss Car Wrap | Polymeric Vinyl

Regular price $180.00 USD
Size: 1.52*6m(5*20ft)
Color: Tiffany Blue

🎉 Free Shipping! Ready to ship

Tiffany Blue Super Gloss Car Wrap | Polymeric Vinyl
$180.00 USD
1.52*6m(5*20ft) / Tiffany Blue

Tiffany Blue is that soft mint-aqua tone that turns heads without shouting. In gloss it reads clean and almost liquid, picking up sky and light along every curve so the panel looks freshly sprayed rather than covered. It sits somewhere between pastel and teal, calm in the shade and bright in full sun, and it pairs just as well with chrome trim as it does with blacked-out details.

Under that finish is a polymeric PVC film that does real work. It hugs the bodywork and forms a barrier over your factory paint, taking the daily hits from grit, sap, bug splatter and car wash swirl so the original surface stays sealed and protected. When you want a change or it is time to sell, the wrap comes off and the paint is still there underneath.

Side-by-side of a car panel in Tiffany Blue gloss vinyl wrap versus the same panel done as a respray, showing the wrap as the cheaper reversible option

Key features

  • Painted-on gloss finish: a mirror-gloss topcoat gives the deep wet-paint shine without the cost of a respray.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the gloss topcoat holds up to sun and rain across a -30 to +140 degree range.
  • Easy to keep clean: wipes down and washes like paint, with no special care needed.

How a wrapteck gloss wrap is built

Cross-section diagram of Tiffany Blue gloss vinyl wrap showing the PVC color face, the air-release acrylic adhesive layer and the PET liner

Specifications

Material Polymeric PVC vinyl
Finish Gloss
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

How long will a Tiffany Blue gloss wrap last?

With normal care you can expect years of service from this film. Soft pastel tones like Tiffany Blue hold up well because the color sits inside the PVC face rather than on top. Keep the car garaged when you can and out of constant harsh sun and the wrap will look fresh for longer. A daily driver baking outside all day will not last as long as one that gets some shelter.

Will the wrap damage or protect my paint?

It protects it. The Tiffany Blue film lays over your factory paint and shields it from grit, light scratches, sap and bug splatter. Your original finish stays sealed underneath and untouched. As long as the paint was in good shape and properly cleaned before the wrap went on, it stays in good shape when the film comes off.

Is gloss wrap better than a respray?

For most people, yes. A Tiffany Blue respray is permanent, costs a lot more and means sanding into your factory paint. This wrap gives you the same glossy painted-on look for less, it is reversible, and it actually guards the paint instead of replacing it. You can also switch to a totally different color later without starting over at a body shop.

How much film do I need for my car?

Our Tiffany Blue rolls are 1.52m (5ft) wide and come in 6m, 18m and 23m lengths. As a rough guide, a small car or full set of accents suits the 18m roll, a typical sedan or coupe tends to need around the 18m to 23m range, and large SUVs or trucks usually call for the 23m. Order a little extra so you have room for mistakes and complex curves.

Can I install this myself?

You can. The Tiffany Blue film uses a Henkel solvent-based acrylic adhesive with air-release channels, so trapped bubbles push out to the edge instead of staying stuck under the surface. That gives you time to lift and reposition as you work. You can run a dry or wet install. Take your time on bumpers and mirrors, keep a heat gun handy, and clean panels are everything.

Does it come off cleanly later?

Yes. When you are ready for a change, warm the Tiffany Blue film with gentle heat and peel it back at a low angle. On healthy factory paint it lifts away without tearing up the surface. Any light adhesive trace wipes off with adhesive remover, leaving the paint clean and ready for the next wrap or for sale day.

How do I wash and care for it?

Treat it like good paint. Hand wash the Tiffany Blue wrap with a mild soap and a soft mitt, rinse well and dry with a microfiber towel to stop water spots. Skip harsh brushes and aggressive automatic washes. Wipe off bird droppings, sap and bug splatter quickly since those can stain if left to sit. The film handles heat from -30 to +140 C, so normal weather is no problem.

Will the gloss fade over time?

The gloss is built to hold its shine. Tiffany Blue keeps its bright mint-aqua tone best when it is kept out of relentless direct sun and washed regularly. UV is the main thing that dulls any wrap, so a garaged car will stay glossier longer than one parked outside around the clock. Routine cleaning keeps the surface reflective and the color crisp.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns