Light Black is the softer smoke option in this line. It dims the lens noticeably and hides the amber bulb housing, but it reads as a refined factory-dark look rather than a blacked-out style. If you want maximum darkness, the Black option in this same TPU film will go deeper.

Any tint film reduces some light transmission, and Light Black is a mild shade specifically chosen for drivers who want style without a big hit to night output. Most owners find the difference acceptable for street driving. If your local regulations set a minimum light output for headlights, check compliance before applying any tint.

Standard vinyl smoked film is rigid and brittle at the edges, meaning stone chips and flex cracks are common. TPU is an elastic material that absorbs small impacts from road debris and pebbles, and it conforms to tight curves on modern projector or LED lens housings without lifting at the edges.

Use the wet-stick method included in the instructions. Clean the headlight lens thoroughly, mist the lens and the film adhesive side with a diluted soap solution, position the film, then use a squeegee to push out water and bubbles from the center outward. The slip solution gives you several minutes to reposition before the film sets.

Yes. The repositionable acrylic adhesive on this TPU film is designed to lift cleanly. Warm the film gently with a heat gun on a low setting, peel from one corner at a low angle, and the lens surface will be left completely free of glue residue.

The TPU layer is UV resistant and acts as a barrier between sunlight and the polycarbonate lens underneath. Lenses yellow and oxidize when UV breaks down the factory clear coat; this film slows that process while it is installed.

Yes. The film is fully waterproof and has an anti-fouling surface that resists road grime, bug splatter, and brake dust. Normal car wash methods work fine. Avoid harsh solvent-based cleaners that could soften the adhesive edges.

This film comes in nine colors: Light Black, Black, Grey, Light Grey, Orange, Blue, Viper Green, Green, and Yellow. All share the same TPU construction, repositionable adhesive, and wet-stick install method.