Twin Color Metallic Candy Ash Color-Shift Car Wrap | Chameleon Vinyl

Regular price $190.00 USD
Size: 1.52*6m(5*20ft)
Color: Candy Ash

🎉 Free Shipping! Ready to ship

Twin Color Metallic Candy Ash Color-Shift Car Wrap | Chameleon Vinyl
$190.00 USD
1.52*6m(5*20ft) / Candy Ash

Twin Color Metallic Candy Ash does not sit still. Park it and the panels read as a smoky ash gray, then walk around the car and the metallic candy tone rolls in like a second coat of color. The flip follows the sun and the streetlights, so the same fender looks one way at noon and another way at night. That twin-tone trick is what people stop and stare at.

This is a color-changing wrap, not a coat of paint. It lays over your factory finish, gives you the full chameleon flip, and shields the paint underneath from daily grit, light scuffs, and weather. When you want your original color back, the film comes off and the paint is still there.

Twin Color Metallic Candy Ash color-shift wrap flipping between smoky ash gray and metallic candy next to a flat painted panel

Key features

  • Color shifts as you move: layered pigment flips the shade with the viewing angle and the light, so the car looks alive in motion and never the same in two photos.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the topcoat holds up to sun and rain across a -30 to +140 degree range.

How a wrapteck color-shift wrap works

Layers of the Twin Color Metallic Candy Ash chameleon wrap showing the color-shift face film, adhesive, and release liner

Specifications

Material Polymeric PVC vinyl
Finish Color-shift / chameleon (flips with viewing angle)
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

What makes the color shift on this wrap?

The face film carries pigment layers that bend light differently depending on the angle you view it from. As you move around the car, or as the light moves across it, the reflected color changes. No power, no coating, no trick. The flip is built into the film itself.

What two colors does Candy Ash actually show?

It reads as a muted ash gray when you look straight on, then swings into a warmer metallic candy tone as the angle and light change. The two tones trade places as you walk the car, which is where the Twin Color name comes from. Direct sun pulls out the candy side, shade leans it back toward ash.

Will this wrap hurt my paint or actually protect it?

It protects it. The film sits on top of your factory paint and takes the daily abuse instead, light scratches, road film, sun, and bird mess. Your original paint stays sealed underneath. When you remove the wrap later, the paint is in the same shape it was the day you covered it.

Why pick a color-shift wrap over a real flip paint job?

A true two-tone color-flip paint job costs a small fortune, takes your car off the road for a long time, and is painful to fix if a panel gets damaged. This wrap gives you the same head-turning flip for far less, goes on faster, and peels off when you want a change. You also keep the factory paint you paid for.

Can I install Candy Ash myself?

Yes. The film uses a Henkel solvent-based acrylic air-release adhesive, so the channels let trapped air escape and you can reposition while you work instead of fighting bubbles. You can run a dry or wet install. First-timers should start on a flat panel like a roof or hood and use heat to ease it around curves.

How do I wash and care for this wrap?

Hand wash with a mild car soap and a soft mitt, then rinse and pat dry. Skip automatic brush washes and stay off harsh solvents. Clean off bug splatter and bird mess quickly so it does not sit on the film. Parking in a garage keeps the color-shift looking fresh and helps the wrap last longer.

Does the wrap come off cleanly later?

Yes. With gentle heat the film lifts away in sheets and leaves your factory paint behind. A clean, properly cared for wrap removes the cleanest, which is one more reason to keep it out of long stretches of harsh sun and to wash it regularly.

How much film do I need for my car?

It depends on your vehicle size and how much you are covering. The roll runs 1.52m (about 5ft) wide. A small coupe needs less, a large SUV or truck needs more, and full wraps need extra for mirrors, door jambs, and mistakes. Measure your panels and add a margin so you are not short mid-job.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns