1 / 1

Twin Color Shift Metallic Gray Blue Color-Shift Car Wrap | Chameleon Vinyl
$190.00 USD
Size: 1.52*6m(5*20ft)
Color: Gray Blue

🎉 Free Shipping! Ready to ship

Twin Color Shift Metallic Gray Blue Color-Shift Car Wrap | Chameleon Vinyl
$190.00 USD
1.52*6m(5*20ft) / Gray Blue
View details

This wrap never sits still. Twin Color Shift Metallic Gray Blue leans cool silver gray when the light hits straight on, then rolls into a deep metallic blue as you walk around the panel or the sun drops low. Two looks live in one film, and the flip happens on its own with every change in angle and light. Park it, drive it, watch it move.

It is a color wrap first, but it pulls double duty. The vinyl lays a fresh metallic finish over your factory paint while sealing the surface from road grime, light scuffs, and daily wear. Your real paint stays sealed and untouched underneath, ready to come back the day you peel the wrap off.

Twin Color Shift Metallic Gray Blue wrap on a car flipping from cool gray to deep blue next to a single-tone paint job for comparison

Key features

  • Color shifts as you move: layered pigment flips the shade with the viewing angle and the light, so the car looks alive in motion and never the same in two photos.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the topcoat holds up to sun and rain across a -30 to +140 degree range.

How a wrapteck color-shift wrap works

Layer diagram of the Twin Color Shift Metallic Gray Blue chameleon wrap showing the color-shift PVC face film, air-release adhesive, and release liner

Specifications

Material Polymeric PVC vinyl
Finish Color-shift / chameleon (flips with viewing angle)
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Twin Color Shift Metallic Gray Blue Color-Shift Car Wrap | Chameleon Vinyl
  • Twin Color Shift Metallic Gray Blue Color-Shift Car Wrap | Chameleon Vinyl
  • Twin Color Shift Metallic Gray Blue Color-Shift Car Wrap | Chameleon Vinyl
  • Twin Color Shift Metallic Gray Blue Color-Shift Car Wrap | Chameleon Vinyl
  • Twin Color Shift Metallic Gray Blue Color-Shift Car Wrap | Chameleon Vinyl
1 / 1

Frequently asked questions

What two colors does this wrap actually show?

It moves between a cool metallic silver gray and a deep metallic blue. Straight-on light reads more gray, while angled light and lower sun push it toward the blue side. You see both on the same panel at once, with the shift sliding across curves and body lines.
How does the color-shift effect work?

The film carries special light-reflecting pigments that bounce different wavelengths depending on the angle you view it from. Nothing electronic and nothing you switch on. As you move around the car or the light changes through the day, the gray and blue trade places on their own.
Will this wrap damage my paint or protect it?

It protects it. The vinyl sits on top of your factory paint and shields it from grime, light scuffs, and daily wear. The paint underneath stays sealed and stock. When you remove the wrap later, your original finish is still there.
How is a color-shift wrap different from a custom paint job?

A real two-tone flip paint job costs a small fortune, takes weeks, and is a nightmare to repair if you scratch it. This wrap gives you the same gray-to-blue flip for a fraction of the price, goes on far faster, peels off when you want a change, and keeps your factory paint safe the whole time.
Can I install it myself?

Yes. The Henkel solvent-based acrylic adhesive is air-release, so the channels let trapped air escape and help you slide out bubbles as you work. You can run a dry or wet install. Take your time on curves, use heat to set it, and first-timers do fine on smaller panels before tackling a full body.
How do I wash and care for it?

Hand wash with a mild car shampoo and a soft mitt, then rinse and dry. Skip harsh solvents and automatic brush washes. Keeping it garage parked out of constant sun helps the gray and blue stay rich and the film last longer.
Does it remove cleanly?

Yes. Warm the film gently and pull it back at a low angle and it lifts away without tearing up your paint. Wraps kept out of long heat and sun come off cleaner. Any light adhesive trace wipes off with adhesive remover.
How much film do I need for my car?

The roll is 1.52m wide, which is 5 feet, so most panels wrap in a single pass. A small car or sedan full wrap usually lands near 18 to 20 meters, a midsize around 20 to 23 meters, and large SUVs and trucks more. Add a little extra for mistakes and complex curves.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns