Metal Coffee Brown Matte Car Wrap | Polymeric Vinyl

Regular price $190.00 USD
Size: 1.52*6m(5*20ft)
Color: Coffee Brown

💪 Hurry up! Only 8 left

Metal Coffee Brown Matte Car Wrap | Polymeric Vinyl
$190.00 USD
1.52*6m(5*20ft) / Coffee Brown

Metal Coffee Brown is a deep, roasted brown with a soft metallic shimmer baked under a flat matte top. There is no gloss and no glare. In daylight it reads as a warm dark espresso, and as the light moves you catch a faint metal grain in the surface. It is the kind of brown that looks custom and grown up, not loud, and it sits beautifully on classic shapes, SUVs and sedans alike.

This is a color change wrap, not a clear film. It lays a fresh flat layer over your factory paint and takes the daily hits of dust, light scuffs and weather so the paint underneath stays clean and original. When you are ready for a new look, it comes off and your paint is still there.

Metal Coffee Brown matte vinyl wrap shown next to a matte respray to compare cost and finish

Key features

  • Flat matte finish: a non-reflective topcoat gives the factory-flat, no-shine look that paint cannot match without a costly custom job.
  • Hides minor flaws: the matte surface softens light, so it disguises small swirls and imperfections instead of spotlighting them like gloss does.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the topcoat holds up to sun and rain across a -30 to +140 degree range.

How a wrapteck matte wrap is built

Layer structure of Metal Coffee Brown matte vinyl wrap showing the matte PVC face, acrylic adhesive and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Matte (flat, non-reflective)
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

How long does a Metal Coffee Brown matte wrap last?

With good care it holds its flat espresso look for years. The matte finish on this brown actually hides light swirls better than gloss does, so it ages gracefully. A car kept in a garage and out of constant sun will keep that deep color longer than one parked outside every day.

Will the wrap damage or protect my factory paint?

It protects it. The vinyl sits on top of your paint and takes the daily dust, light scuffs and grime instead of the paint doing it. As long as your factory paint is sound when you wrap, it stays sealed and clean underneath. When the wrap comes off later, the original paint is still there.

Metal Coffee Brown wrap or a matte brown paint job, which makes more sense?

A matte brown respray is expensive, permanent and very hard to touch up if you scratch it, since matte paint cannot be polished out. This wrap gives you the same deep flat brown for far less, it goes on faster, and if you change your mind you peel it off instead of repainting. Your factory paint also stays protected the whole time.

How do I wash and care for a matte wrap? Can I wax it?

Never wax, polish or machine buff this wrap. Any of those will burn shiny spots into the flat finish and ruin the matte look. Hand wash only with a matte safe soap, skip the automatic brush car washes, and rinse and dry by hand. If you get fuel, bird mess or bug splatter on it, wipe it off quickly so it does not sit and stain the flat surface.

Can I install Metal Coffee Brown myself?

Yes, many people do. The film has a Henkel solvent based acrylic air release adhesive, so trapped bubbles push out to the edges as you squeegee instead of getting stuck under the surface. You can do a dry or wet install. Flat panels like a hood or roof are the easiest place to start. Deep curves and bumpers take more heat and patience, so go slow on those.

Does the wrap remove cleanly later?

Yes. On sound factory paint it peels off cleanly, usually with gentle heat to soften the adhesive. Because it is a wrap and not a permanent coating, removal is part of the design. That is the whole point of color change vinyl, you get this deep coffee brown now and your original paint back whenever you want it.

Will it stay flat or go shiny over time?

It stays flat as long as you treat it as a matte surface. The shine risk comes from wax, polish, buffing or harsh automatic washes, not from age. Keep to hand washing with a matte safe soap and this brown keeps its even, no glare finish across the whole car.

How much film do I need for my car?

The rolls are 1.52m (5ft) wide and come in 6m, 18m and 23m lengths. A small car or a few panels often fits the 6m roll. A full sedan or small SUV usually lands around the 18m roll, and a larger vehicle or a first time install where you want spare film for mistakes is safer with the 23m. When in doubt, size up so you have extra for corners and recuts.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns