1 / 1

Metallic Black Blue Matte Car Wrap | Polymeric Vinyl
$200.00 USD
Size: 1.52*6m(5*20ft)
Color: Black Blue

🎉 Free Shipping! Ready to ship

Metallic Black Blue Matte Car Wrap | Polymeric Vinyl
$200.00 USD
1.52*6m(5*20ft) / Black Blue
View details

Metallic Black Blue gives your car that deep, late-night look. The base reads as a moody near-black, then the metallic flake catches light and pulls a cool blue out of the shadows. Because the finish is fully matte, there is no glare and no mirror shine, just a flat stealth surface that shifts as you walk around the car. It is the kind of color that looks different in a parking garage than it does under open sky.

This is a color wrap, not a clear film. It lays over your existing paint and takes the daily hits for you, the light scuffs, the swirl marks, the sun. Your factory paint stays sealed underneath, and when you want a change later the film comes off without a respray. You get the murky blue-black tone you want now and your original finish kept safe for whatever comes next.

Side by side of a car finished in Metallic Black Blue matte vinyl wrap versus the same car after a matte respray

Key features

  • Flat matte finish: a non-reflective topcoat gives the factory-flat, no-shine look that paint cannot match without a costly custom job.
  • Hides minor flaws: the matte surface softens light, so it disguises small swirls and imperfections instead of spotlighting them like gloss does.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the topcoat holds up to sun and rain across a -30 to +140 degree range.

How a wrapteck matte wrap is built

Layer diagram of Metallic Black Blue matte vinyl wrap showing the matte PVC face, acrylic air-release adhesive, and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Matte (flat, non-reflective)
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Metallic Black Blue Matte Car Wrap | Polymeric Vinyl
  • Metallic Black Blue Matte Car Wrap | Polymeric Vinyl
  • Metallic Black Blue Matte Car Wrap | Polymeric Vinyl
  • Metallic Black Blue Matte Car Wrap | Polymeric Vinyl
  • Metallic Black Blue Matte Car Wrap | Polymeric Vinyl
1 / 1

Frequently asked questions

How long will a Metallic Black Blue matte wrap last?

With good care it lasts for years. Matte films like this Black Blue do best out of constant sun, so a garage-kept car will hold its deep tone longer than one parked outside every day. Wash it gently, keep grime from sitting on it, and the flat finish stays even.
Will this wrap damage my paint or actually protect it?

It protects it. The Metallic Black Blue film sits on top of your factory paint and takes the daily wear, light scratches, road grime, and sun, instead of the paint underneath. As long as your existing paint is sound and well stuck to the car, the wrap shields it rather than harming it.
Matte wrap or a matte respray, which makes more sense?

A matte respray in a color like this is expensive, permanent, and a nightmare to touch up if it ever gets scratched, because matte paint cannot just be buffed back. This wrap gets you the same flat Black Blue look for far less, it is reversible, and it keeps your original paint intact underneath.
How do I wash and care for this matte finish?

This is the part that matters most. Never wax, polish, or machine-buff a matte wrap, because any of those will leave shiny patches in the flat finish. Hand wash only with a matte-safe soap, skip the automatic brush car washes, and wipe off fuel splashes or bird mess quickly before they sit. Treated this way the Black Blue stays evenly matte across the whole car.
Can I install it myself?

Yes, plenty of people do. The Henkel air-release adhesive lets trapped air escape through tiny channels, so you get fewer bubbles and can reposition the film as you work. You can install dry or wet. Large flat panels like a roof or hood are very doable at home, while tight bumpers and mirrors take more patience and heat.
Does it come off cleanly later?

Yes. When you are ready for a change, the film peels away with gentle heat and leaves your factory paint as it was. That clean removal is a big reason to choose this Metallic Black Blue wrap over a permanent paint job.
Will it stay flat or start to go shiny over time?

It stays matte when you care for it right. Shiny spots on a matte wrap almost always come from waxing, polishing, or scrubbing too hard in one area. Avoid those, hand wash gently, and the flat Black Blue finish stays consistent.
How much film do I need for my car?

The rolls are 1.52m (5ft) wide and come in 6m, 18m, and 23m lengths. As a rough guide, a small car usually needs around 15m, a sedan around 18m, and a large SUV or truck closer to 23m. Add extra if you want to wrap mirrors, door jambs, or practice on a panel first.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns