1 / 1

Metallic Flip Pink Purple Matte Car Wrap | Polymeric Vinyl
$200.00 USD
Size: 1.52*6m(5*20ft)
Color: Pink Purple

🎉 Free Shipping! Ready to ship

Metallic Flip Pink Purple Matte Car Wrap | Polymeric Vinyl
$200.00 USD
1.52*6m(5*20ft) / Pink Purple
View details

Metallic Flip Pink Purple shifts as you move around the car. From one angle it reads soft pink, from another it leans deep purple, and a fine metallic flake catches the light without ever turning glossy. The finish stays flat and non-reflective, so you get that stealthy matte depth with a color that keeps changing in the sun.

This is a full color wrap, not a clear film. The polymeric vinyl lays over your factory paint and takes the daily hits of dust, light scuffs and weather so the panel underneath stays sealed and clean. When you are ready for a new look it peels away and leaves the original paint as it was.

Metallic Flip Pink Purple matte vinyl wrap next to a pink-to-purple respray, showing the cheaper reversible wrap option

Key features

  • Flat matte finish: a non-reflective topcoat gives the factory-flat, no-shine look that paint cannot match without a costly custom job.
  • Hides minor flaws: the matte surface softens light, so it disguises small swirls and imperfections instead of spotlighting them like gloss does.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the topcoat holds up to sun and rain across a -30 to +140 degree range.

How a wrapteck matte wrap is built

Layer structure of Metallic Flip Pink Purple matte vinyl wrap showing the matte PVC face, acrylic adhesive and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Matte (flat, non-reflective)
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Metallic Flip Pink Purple Matte Car Wrap | Polymeric Vinyl
  • Metallic Flip Pink Purple Matte Car Wrap | Polymeric Vinyl
  • Metallic Flip Pink Purple Matte Car Wrap | Polymeric Vinyl
  • Metallic Flip Pink Purple Matte Car Wrap | Polymeric Vinyl
  • Metallic Flip Pink Purple Matte Car Wrap | Polymeric Vinyl
1 / 1

Frequently asked questions

How long does a Metallic Flip Pink Purple matte wrap last?

With good care it holds its color shift and flat finish for years. A car that lives in a garage will keep the pink to purple flip looking fresh longer than one parked in full sun every day. Gentle hand washing and quick cleanup of any mess go a long way.
Will this wrap damage my paint or protect it?

It protects it. The vinyl sits over your factory paint and takes the dust, light scratches and weather instead, keeping the panel sealed underneath. On healthy factory paint it also peels away cleanly when you want a change.
Matte wrap or a matte respray, which makes more sense?

A matte respray in a color-shift pink purple is expensive, permanent and very hard to touch up if it gets damaged. This wrap gives you the same flip effect for far less, it is reversible, and it shields your real paint rather than replacing it. If you want to go back to factory later, you just remove the film.
How do I wash and care for a matte wrap?

This is the most important part with matte. Never wax, polish or machine buff this wrap, because any of those will leave shiny spots and ruin the flat look. Hand wash with a matte-safe soap, skip automatic brush car washes, and spot clean fuel splashes or bird mess quickly so they do not stain the finish.
Can I install it myself?

Yes, many DIY installers do. The Henkel air-release adhesive lets trapped air escape through tiny channels, so bubbles push out instead of getting locked in, and you can work dry or wet. Take your time on curves and edges and use gentle heat to set it. Larger or deeply curved panels are easier with a second pair of hands.
Does it remove cleanly later?

On sound factory paint, yes. Warm the film gently and peel it back at a low angle and it comes off without taking your paint with it. That is the big advantage over a respray, you can switch colors or return to stock whenever you like.
Will it stay flat or eventually go shiny?

It stays matte as long as you care for it the matte way. The one thing that turns a matte wrap shiny is wax, polish or buffing, so just keep those off it. Normal hand washing keeps the flat pink purple flip exactly as it should look.
How much film do I need for my car?

The rolls are 1.52m (5ft) wide and come in 6m, 18m and 23m lengths. A small panel or accent piece is fine with 6m, a full sedan usually lands around the 18m roll, and large SUVs, trucks or anyone wanting extra for mistakes should go with 23m. Measure your panels and add a little margin for wrapping around edges.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns