Metallic Night Gold Matte Car Wrap | Polymeric Vinyl

Regular price $200.00 USD
Size: 1.52*6m(5*20ft)
Color: Night Gold

🎉 Free Shipping! Ready to ship

Metallic Night Gold Matte Car Wrap | Polymeric Vinyl
$200.00 USD
1.52*6m(5*20ft) / Night Gold

Metallic Night Gold is a dark, smoky gold with a flat matte surface and a fine metallic shimmer worked into the color. There is no shine and no mirror glare. Instead you get a soft, low-key gold that shifts with the light and reads more like a deep bronze under cloud and a warmer gold in full sun. It is a finish that looks expensive without shouting.

This is a color wrap, not a coating. The film lays a fresh matte skin over your panels and seals the factory paint underneath from sun, light grit, and the small marks of daily driving. When you want a change, it peels away and your original paint is still there.

Car panel half in Metallic Night Gold matte vinyl wrap and half in a costly matte gold respray, comparing the two finishes.

Key features

  • Flat matte finish: a non-reflective topcoat gives the factory-flat, no-shine look that paint cannot match without a costly custom job.
  • Hides minor flaws: the matte surface softens light, so it disguises small swirls and imperfections instead of spotlighting them like gloss does.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the topcoat holds up to sun and rain across a -30 to +140 degree range.

How a wrapteck matte wrap is built

Layer diagram of Metallic Night Gold matte vinyl showing the matte PVC face, air-release acrylic adhesive, and PET liner.

Specifications

Material Polymeric PVC vinyl
Finish Matte (flat, non-reflective)
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

How long will a Metallic Night Gold wrap last?

With good care it holds its deep matte gold look for years. The biggest factor is where the car lives. A wrap kept in a garage and out of constant sun and weather will last noticeably longer than one parked outside all day. Wash it gently and keep harsh chemicals off it and Metallic Night Gold stays even and flat for a long time.

Will this wrap damage my paint or protect it?

It protects it. The film sits on top of your factory paint and takes the daily hits of sun, dust, and light surface marks instead of the paint. As long as your original paint is healthy and well stuck to the car, the Metallic Night Gold wrap shields it while it is on and comes off cleanly when you want a change.

How is a Metallic Night Gold wrap different from a matte gold paint job?

A matte respray in this kind of gold is expensive, slow, and very hard to touch up because matte paint cannot be polished back to match. This wrap gives you the same deep matte gold for far less, goes on faster, and keeps your factory paint underneath. If you ever want to sell the car or change the color, you peel the wrap instead of repainting twice.

How do I wash and care for a matte wrap like this?

This is the most important part. Never wax, polish, or machine-buff Metallic Night Gold. Any of those will leave shiny patches in the flat finish and you cannot undo them. Hand wash only with a matte-safe soap, skip automatic brush car washes, and rinse well. Clean off fuel splashes, bird mess, and tree sap quickly so they do not stain the matte surface.

Can I install this myself?

Yes, many people do. The film uses a Henkel solvent-based acrylic air-release adhesive, so air bubbles push out through tiny channels in the glue instead of trapping under the film. That makes it far more forgiving than basic vinyl. You can install dry or wet. Take your time on curves and around edges, use gentle heat to shape it, and work panel by panel.

Does Metallic Night Gold remove cleanly later?

Yes. When you are ready for a change, warm the film with a heat source and peel it back slowly at a low angle. On healthy factory paint it lifts away and leaves your original color underneath. Any light adhesive left behind wipes off with a proper adhesive remover.

Will it stay matte or go shiny over time?

It stays matte as long as you care for it the right way. Matte film goes shiny in spots only when it gets waxed, polished, buffed, or scrubbed hard in one place. Stick to gentle hand washing and Metallic Night Gold keeps its even, flat, non-reflective gold finish across every panel.

How much film do I need for my car?

The rolls are 1.52m wide (about 5ft) and come in 6m, 18m, and 23m lengths. A small job like a roof, hood, or accent stripes can work from a 6m roll. A full small car usually needs around the 18m length, and larger cars or SUVs are safer with 23m. Add extra for mistakes and complex curves if it is your first time.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns